Availability
On Sale
Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 1994 )
$186.99
—
$249.99
$168.29
—
$224.99
On Sale
Everyone loves the look of classic sealed beam headlights, but the dim halogen light output makes nighttime driving a potentially risky endeavor for you and your beloved classic. Holley's new RetroBright LED headlights offer a number of advantages over traditional sealed beam headlights, such as plug-and-play compatibility, better visibility, and 6x longer life. Not only that, but because they are LED, the lights take up less space, create far less heat, and use less power than other headlights. The low-profile housing design fits most shallow headlight buckets found on classic cars without the hassle of cutting or drilling. Holley worked closely with Morimoto, a leader in lighting design, to develop its lineup of lighting solutions that boast a classic look with modern lighting technology. A special PWM LED driver resides inside of the headlight to keep the LEDs running at their peak intensity, even during prolonged periods of use. For example, the 7 in. round LED produces 32,000 Candela for low beam, and 53,000 Candela for high beam, which is nearly three times more light output than your original headlights. RetroBright has offerings to fit most classic and modern vehicles that utilize the popular 5.75 in. round, 7 in. round, 4 in. x 6 in. rectangular, and 5 in. x 7 in. rectangular headlight housings. They're available in 3000 Kelvin and 5700 Kelvin color temperatures, depending on whether you're looking for that classic lighting hue or want an even brighter, more modern look. And if your vehicle feels more at home across the pond, Holley also offer headlights with yellow lenses for that European flair. Additional details: * Plug-and-Play: Plugs into factory headlight harness for easy installation * Classic Styling: Retro styled headlight for period correct appearance * Superior: Over 2x the light output of halogens to keep you and your classic safe * Low Draw/Extended Life: Less current draw and 6x the life of halogen sealed beams * Compliant: No-glare beam pattern meets or exceeds SAE and DOT requirements * Serviceable: Replaceable LED cartridges for easy serviceability * Proper Fitment: Engineered to fit most shallow light buckets found on classic vehicles * Stronger: UV-treated polycarbonate lens won't shatter and is 10x stronger than glass or standard plastic * Compatible: Sealed Beam Trade Numbers: H5054, H6052, H6054 * Color Choice: Available in "Classic White" (3000K bulb) for a warm classic hue, "Modern White" (5700K bulb) for a cleaner modern look, or a Yellow Lens (utilizes 5700K bulb inside)
( 146 )
$193.95
—
$249.95
$126.95
—
$224.95
On Sale
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems and come in different pressure ranges to suit your engine applications requirements.
( 48 )
$149.95
—
$212.95
$134.95
—
$191.65
On Sale
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 387 )
$228.99
—
$277.99
$206.09
—
$250.19
On Sale
These Red electric fuel pumps from Holley feature an improved design for street and strip applications, and a tumble-polished billet look with the distinctive red logo. These pumps have a 97 gph flow rate, draw only 2 amps, and have a maximum pressure of 7 psi with an externally accessible pressure relief valve. They weigh only 2.88 lbs., and include a mounting bracket.
( 279 )
$199.95
$179.95
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 45 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1945 )
$112.95
—
$283.95
$101.65
—
$255.55
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 303 )
$226.95
—
$239.95
$204.25
—
$215.95
On Sale
Holley Sniper EFI oxygen sensors are the best replacements for your system. When you need to service your Sniper EFI throttle body, Holley's list of parts include these O2 sensors to maintain a proper reading of oxygen levels in the exhaust. These replacement Bosch wideband sensors feature anti-seize pre-applied to sensor threads.
( 54 )
$160.95
$144.85
On Sale
Warn's premium manual hubs feature a no-compromise design for the hardcore off-roader or truck owner who will accept nothing less than the industry standard in performance. Their all-metal construction and ZA alloy dial ensure years of reliable functioning. The dial requires a full 9/10 of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure that they stay engaged, Warn premium hubs use a thick internal wave spring and heavy dial detents.
( 194 )
$206.99
$186.29
On Sale
MSD high-current solid state relay blocks take the place of four standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 amps of continuous current, providing up to 140 amps of power, and also has the capability of pulse width modulation. The blocks can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90 degrees to accommodate various mounting locations. Clean up your wiring with MSD high-current solid state relay blocks. Features include: * Operates from 7 V to 20 V supply * Four independent channels, 35 amps each continuous or 100 amps for 8 seconds * Combined total continuous current rating of 140 amps * Channels can be run in parallel for devices requiring more than 35 amp single-channel rating * Over-temperature, short circuit, and overload protection * Diagnostic LEDs and status indicators * Multiple mounting options * Single wire activation by switching power or ground * Available in red or black * PWM signal can be used--maximum frequency of 150 Hz and a duty cycle range from 50 to 90 percent
( 13 )
$217.95
$196.15
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 10 )
$295.95
$266.35
On Sale
Whether you call them roll controls, line locks, or whatever, Hurst Roll Controls keep your stick shift car out of the staging lights until you're ready to launch. Controlled by a solenoid valve attached to a switch on your shifter, roll controls keep you from rolling by locking your front or rear brakes. When you hit the switch, your brakes are unlocked and you're ready to hit the throttle. Rigorous testing has proved a 1/100,000th of a second release time, and vibration tests have surpassed 30 Gs without mechanical failure. Each roll control comes with a rebuildable stainless steel solenoid valve, indicator light, inline fuse holder, and complete instructions. Hurst Roll Controls give you one less thing to worry about when you're staging.
( 115 )
$199.95
—
$294.95
$162.95
—
$179.95
On Sale
Summit Racing™ offers rear lowering leaf springs for a wide range of vehicles, from the 1960s and up. These suspension enhancements can give your car, truck, or SUV a more aggressive stance with improved ride quality. The leaf springs are available for a variety of lowered heights; order the model recommended for your application.
( 33 )
$134.99
$121.49
On Sale
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 212 )
$259.95
$233.95
On Sale
Holley LS coil harnesses are factory replacements for stock LS coils. These EFI LS coil sub harnesses are intended to be used with factory LS coils and various Holley EFI main harnesses with coil-on-plug connectors. They are built with the same high-quality connectors and wire loom found on all Holley EFI harnesses, guaranteeing a perfect match in your engine bay. Are you tired of scouring the junkyard for stock LS coil sub harnesses? Holley has the solution. Holley LS coil harnesses feature: * OEM connectors provide a secure connection between your ECU and Ignition Coils * Techflex F6 braided wire loom keeps your engine bay looking clean, while providing abrasion resistance * Plug-and-play fitment * Can be used to replace a damaged factory coil harness
( 17 )
$199.95
$179.95
On Sale
Holley EFI O2 sensors precisely manage air fuel ratios to keep your engine performing at its peak. Available in Bosch LSU4 and NTK wideband configurations, Holley EFI has the correct sensor for your high performance EFI application.
( 35 )
$199.95
$179.95
On Sale
MSD inductive timing lights are designed for the racer or professional who needs a timing light that is tough, easy-to-use, and extremely accurate. They can be used with any points or electronic ignition, and provide an accurate signal from 0 to 8,000 rpm.
( 56 )
$217.95
$196.15
On Sale
Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1
( 156 )
$149.95
—
$272.95
$134.95
—
$245.65
On Sale
Summit Racing™ power brake conversion kits create more stopping power. Upgrading your classic to power brakes is smart—and safer! Many older vehicles used single-reservoir master cylinders. Our conversion kits feature dual reservoir cast iron master cylinders. All parts are brand new, available for many applications from the 1940s and up, and some kits may include pedal rod extensions and mounting hardware.
( 324 )
$181.99
—
$268.99
$163.79
—
$242.09
On Sale
MSD Blaster HVC ignition coils are designed for high-rpm, long-duration applications, such as road course and Circle Track racing using the MSD 6 Series ignition. These units feature a 100:1 turns ratio, as well as lower primary resistance to produce high-voltage output. Windings are encased in a durable epoxy and secured with extruded brackets. They also feature a spark plug style terminal and a threaded brass primary stud. These ignition coils are CARB EO-approved and are supplied with rubber shock mounts to help them resist coil vibration. Equip your performance vehicle with MSD Blaster HVC ignition coils and feel the power!
( 34 )
$206.95
$186.25
On Sale
These Holley replacement fuel injector wiring harnesses are replacements for the 8-cylinder injector harnesses. They connect the main harness to the injectors, routing the wires over the rail and making replacement a snap!
( 14 )
$149.95
—
$299.95
$134.95
—
$247.45
On Sale
MSD digital 6A ignition controllers--great ignition systems get even better! And, now you can update your ride with the digital circuitry of these powerhouses. MSD lowered the profile for a sleek look and routed the wiring out one side of the unit through a sealed and locked connector for easy installation with a clean, neat look under your hood. More important is what's inside these digital 6A ignitions. Microprocessors, updated circuits and efficient components control every firing to help the ignition make more power with less current draw--each spark packs more than 135 millijoules of energy with up to 530 volts! Others strive where MSD succeeds; join the proven win-win of "fire to drive" with unmistakable, MSD technology at its best--digital 6A ignition controllers.
( 150 )
$249.95
$224.95
On Sale
Easily lift your engine with one of these Summit Racing™ engine slings. The nylon strap design prevents damage to valve covers, intakes, or any other engine accessory when lifting. The 24 in. straps allow the sling to clear most intake setups. Simply attach the four strap mounting tabs to the engine block and use a traditional engine hoist to safely support your engine during removal and installation.
( 38 )
$112.99
$101.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
