Availability
On Sale
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems, and come in different pressure ranges to suit your engine application requirements.
( 48 )
$149.95
—
$212.95
$134.95
—
$191.65
On Sale
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 5 )
$124.95
$112.45
On Sale
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$167.95
—
$199.95
$151.15
—
$179.95
On Sale
Agility Auto Parts offers a complete line of fuel tank sending units covering a wide variety of North American vehicles. These sending units are engineered to meet or exceed all OEM specifications. They're corrosion-resistant, leak-resistant, and made of durable materials for long-lasting use. Agility Auto Parts fuel tank sending units are available in a range of sizes and attachment styles. Order the model recommended for your applications.
( 2 )
$111.99
—
$215.99
$100.79
—
$194.39
On Sale
Aeromotive offers fuel level sending units designed for use with aftermarket fuel cells and tanks, such as 6, 15, or 20-gallon capacity models. These replacement or upgrade 10 in. tube-style units have a 0-30 Ohm rating and work with your vehicle's fuel gauge to indicate the current fuel level.
Not Yet Reviewed
$162.85
$146.56
On Sale
Adding a Phantom direct drop-in fuel pump will require an Aeromotive fuel level sender bracket. Made from stainless steel, they are available in several styles to cover a specific range of GM truck applications. Coordinate your bracket choice with the make and year range of your vehicle.
Not Yet Reviewed
$134.20
—
$140.00
$120.78
—
$126.00
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$259.95
—
$368.95
$168.95
—
$202.95
On Sale
Aeromotive fuel pump bladder baffle sets are a complement to the APEX Phantom systems. They open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The Phantom bladder baffle can ensure this. Installed in the inlet passages at the base of the Phantom bladder, the new Phantom bladder baffle increases the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
Not Yet Reviewed
$118.25
—
$279.55
$106.42
—
$251.60
On Sale
AEM Electronics offers high-quality stainless steel PSIa sensor kits in 15 (1 BAR), 30 (2 BAR), 50 (3.5 BAR), 75 (5 BAR) and 100 (7 BAR). PSIa is referenced to absolute zero—the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 psi when the sensing element is exposed to atmospheric pressure at sea level; however, they can be recalibrated to read zero at atmospheric, and a negative number at values less than atmospheric pressure.
Not Yet Reviewed
$184.95
$166.45
On Sale
Aeromotive fuel pump bladder and baffle sets are a complement to the APEX Phantom systems. These bladder baffles open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The new Phantom bladder and baffles can ensure this. They increase the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder and baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
( 1 )
$212.15
—
$268.95
$190.94
—
$242.06
On Sale
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$125.95
$113.35
On Sale
Edge EAS pressure sensors come equipped with the proper wires and connectors to plug right into the Universal Sensor Input system. This will save you time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Edge Accessory System pressure sensors can be used to monitor boost psi, fuel rail pressure, air bag pressure, lift pump pressure, pre and post intercooler pressure, and much more.
( 1 )
$207.95
$187.15
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).
Not Yet Reviewed
$329.95
$181.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
$192.95
On Sale
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
$219.95
On Sale
MSD Power Grid exhaust module sensors are offered as replacements and enhancements for your module. Maintain the ability to obtain accurate data with replacement 0 to 75 psi exhaust back pressure sensors, or expand your module's abilities by adding an optional second pressure sensor with harness for dual turbo applications. Keep the operation of your Power Grid exhaust module at an optimum level with genuine MSD accessory sensors.
Not Yet Reviewed
$147.95
$110.95
On Sale
Nitrous Outlet ProMax Progressive Controller nitrous pressure sensors allow the controllers to see accurate bottle pressure. Designed to be used with the ProMax Progressive Controllers, the sensors have 1/8 in. NPT male threads for easy connection to the pressure source.
( 1 )
$117.99
$100.29
On Sale
Holley EFI analog display gauges use digitally-delivered information over Holley's sophisticated CAN bus or wire directly to your sending unit, providing your ride with a classic readout. Those using the bus get their data from the Holley ECU, meaning that you don't have to run wires all over the vehicle. All you have to do is run a single cable to the ECU and then daisy-chain the rest. Holley analog gauges are available to monitor a variety of automotive temperature and pressure functions, along with programmable fuel level and voltage options. Product features include: * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric style and may include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on application) to ensure accurate movement in street and racing conditions * CNC-machined billet aluminum bezels with an anodized finish on some models * Threaded bodies allow a single bezel nut to hold the indicators firmly in place * Bezels are threaded for easy replacement with multiple bezel options available * Each is tested to ensure a top-quality, accurate gauge
( 15 )
$236.95
—
$249.95
$130.95
—
$224.95
On Sale
Clearance
Agility Auto Parts offers a complete line of fuel module assemblies covering a wide variety of North American vehicle applications. Engineered and manufactured in a highly automated and dust-free environment, they meet or exceed all OEM specifications for fit, form, and function. Premium quality is ensured through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and leaks. Agility Auto Parts fuel pump module assemblies include all the necessary components for a drop-in replacement right out of the box!
( 16 )
$111.99
—
$295.99
$100.79
—
$266.39
On Sale
Holley analog standalone gauges provide you with a simple yet modern way to monitor all types of engine and drivetrain functions. Their slim-style mounting requires very little depth, and all of the gauges feature dimmable LED backlighting to ensure you can always see the indicator, no matter the environment. Holley analog standalone gauges are available in a variety of data types and ranges for temperature and pressure monitoring, along with programmable fuel level and voltage options. Features include: * Designed for a 2 1/16 in. openings * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric-style and include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on model) to ensure accurate movement in street and racing conditions * Spin lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum bezels with anodized finish * Bezels are threaded for easy replacement; multiple bezel options available * Each gauge is tested to ensure a top-quality and accuracy
( 2 )
$190.95
—
$192.95
$106.95
—
$171.85
On Sale
Body Armor 4x4 Truck Bed MOLLE system panels are versatile, strong, and a great way to add extra storage and capability to your truck. Delivering the ability to mount Rotopax containers, a Hi-Lift jack, quick fist mounts, and MOLLE bags, these truck bed panels make it possible to add a ton of useful accessories to your vehicle. Body Armor 4x4 truck bed panels feature 3mm thick formed steel construction treated with a 2-stage light texture black powdercoat finish that looks great and protects against the elements. MOLLE system panels are available for the front or sides of your truck bed. Select the panel(s) designed for your truck. Features: * Includes Hi-Lift mounting hardware * Mounts behind utility rail * Allows full use with most accessories and tonneau covers * Easy bolt-on installation
Not Yet Reviewed
$190.00
$161.50
On Sale
Yukon Gear and Axle wheel bearing and hub assemblies are top-quality replacement components designed to improve safety and reduce friction from wear for front and rear applications. Save your time and money while enhancing your ride's performance with Yukon Gear & Axle wheel bearing and hub assemblies. Order the assembly designed to fit your application.
( 1 )
$185.99
—
$283.99
$158.09
—
$241.39
On Sale
Holley drop-in fuel module assemblies cover a wide range of vehicles and performance expectations—including dual pump designs. These replacement assemblies meet the highest-quality standards offered for increased performance and fuel efficiency. Holley drop-in fuel modules are capable of supporting 550-plus horsepower right out of the box! Dozens of models are available, with flow rate options between 50 and 277 gph. Order the fuel module recommended for your vehicle. Features may include: * Plug-and-play wiring harnesses * Integrated fuel storage and filtration technology * Built-in, pre-calibrated fuel level sensors * HydraMat filter (keeps fuel available at the pick-up during radical maneuvers and provides contamination protection) * Most models include sending unit
( 8 )
$475.95
$261.95
On Sale
Service your Auburn limited-slip differential with their spider gear kits. These pinion gear kits offer the convenience of receiving everything you need to restore optimal rear wheel performance to your vehicle.
( 1 )
$114.99
—
$186.99
$103.49
—
$168.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
