Availability
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$279.95
—
$399.95
$219.95
—
$251.95
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$349.99
—
$429.99
$249.99
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 52 )
$299.95
$224.95
On Sale
The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also the only ones that are street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.
( 29 )
$135.99
—
$241.99
$122.39
—
$217.79
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$160.99
—
$276.99
$144.89
—
$249.29
On Sale
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$167.99
—
$283.99
$151.19
—
$255.59
On Sale
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 23 )
$184.99
—
$286.99
$166.49
—
$258.29
On Sale
These Cyclone intake manifolds from Professional Products are designed to fit engine swaps using the 1996 and later Vortec cast iron heads or the Edelbrock E-Tec aluminum heads. These manifolds can be used on any Chevy V8 engine utilizing the late Vortec head. They have a provision for an external water bypass. These Cyclone Vortec intake manifolds feature 4-corner water outlets, dual distributor hold-downs, a square bore carb adapter and gasket, and will work with late model style water neck, alternator, HEI, and air conditioning brackets.
( 19 )
$173.99
—
$212.99
$156.59
—
$191.69
On Sale
Fit your GM Gen V LT1 Holley Hi-Ram manifold with one of their LT Hi-Ram intake plenum tops. Holley offers several versions of these cast aluminum units for your dual 4150 or 4500 carburetors. They're available with a black or natural finish. Complete your tunnel ram intake with Holley LT Modular Hi-Ram intake manifold tops; order the model recommended for your year/make and engine application. Features include: * Modular design with removable top * Overall height: 12.10 in. with carb-style top * Height at plenum flange: 9.44 in. * O-ring seals on plenum top * Easy assembly with top-mounted screws on plenum top (all except front two screws)
( 1 )
$276.95
$249.25
On Sale
Professional Products Cyclone Plus manifolds represent current state-of-the-art technology in intake manifold design for small block Chevy engines using the popular 23 degree cylinder heads. Due to their slightly taller height, these manifolds can provide more power and torque. These Cyclone Plus manifolds feature an integral rear water crossover passage.
Not Yet Reviewed
$224.99
—
$277.99
$202.49
—
$250.19
On Sale
Holley Hi-Ram intake manifold plenum tops are constructed of cast aluminum and offered in different finishes to match the bases. They are available in dual 4150 or 4500 pattern, or in a full blank top so that you can design your system. Choose the ideal plenum for your Hi-Ram manifold.
Not Yet Reviewed
$318.95
$175.95
On Sale
These Professional Products Hurricane Plus intake manifolds are designed for 400 to 550 hp engines under 400 cu. in. These manifolds combine affordability with outstanding power output and are offered in a choice of Vortec and 23 degree head options.
( 2 )
$181.99
—
$282.99
$163.79
—
$254.69
On Sale
These Professional Products CrossWind Vortec manifolds are intended for 1995 and earlier blocks using the 1996 and later Vortec (Gen 1+) cylinder heads or the Edelbrock E-Tec heads. They can also be used on 1996 and later Vortec engines, but require running a short length of heater hose from a pipe tapped hole in the front of the manifold to the 5/8 in. hose nipple on the passenger's side of the water pump. The 1996 and later Vortec blocks do not have a water bypass in the block, and this minor modification takes care of that problem. These are one of Professional Products' most popular street manifolds.
( 12 )
$192.99
—
$221.99
$173.69
—
$199.79
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$328.99
—
$340.99
$228.99
—
$240.99
On Sale
These Edelbrock Victor Ram tunnel ram tops are designed to fit the Victor Ram manifold base. They are made of aluminum and come available in natural or polished finishes. Edelbrock Victor Ram tunnel ram tops are available for dual inline standard square-flange carburetors or dual sideways-mounted Dominator carburetors. A gasket is included, making your installation simple.
Not Yet Reviewed
$201.95
$161.56
On Sale
Cast from high-quality molds for proper fit, these Scott Drake exhaust manifolds will get that engine restoration on the right track to a throaty roar. Whether you are replacing a stock corroded manifold or getting to that exhaust portion of a rebuild, these manifolds will get that engine back to its deep throaty growl that you love.
( 37 )
$291.95
$262.75
On Sale
Holley SBF Hi-Ram intake manifold tops are a great solution when you have limited room in the front of the engine bay. Designed to mount on Holley's existing SBF Hi-Ram manifold bases, these aluminum plenum tops resemble the older Ford EFI manifolds and let you mount the throttle body on the side. This will allow for easier fabrication for boosted applications or for just a different look on your Hi-Ram manifold. These side-mount plenum tops are available in natural cast aluminum or black powdercoat finishes—in models for Ford 5.0L style throttle body patterns in 95mm and 105mm sizes. Order the SBF Hi-Ram intake manifold top that you need for your custom induction system. Additional features and specs include: * Manifold top only (designed for side-mounted throttle bodies) * Cast aluminum construction * Allows room for designing boosted applications * Mounts to existing Hi-Ram manifold bases * Lid has been verified to fit under Cervinis 2.5 in. cowl hood on 1979-93 Mustangs with 351W and 302W Hi-Ram bases when using motor mounts that retain stock engine locations
Not Yet Reviewed
$420.95
$231.95
On Sale
These BD Diesel exhaust manifolds help you maximize your engines true potential. Your stock manifolds can require extensive cleaning and machining to be recovered from warping and distortion. These heavy-walled manifolds are coated to resist corrosion, with some models even predrilled for pyrometer probes. BD Diesel exhaust manifolds are great preventative upgrades whenever you're doing other engine work.
( 45 )
$199.95
—
$289.95
$179.96
—
$260.96
On Sale
Holley throttle body to carburetor manifold adapters allow you to mount an OEM or Holley TBI unit on most any manifold, saving you the expense of buying a different manifold. Made from high-quality cast aluminum, these adapters provide a smooth transition from the throttle body to the intake manifold for trouble-free operation.
( 1 )
$199.95
$179.95
On Sale
Flowtech Rams Horn exhaust manifolds feature a tightly fit block-hugger design for popular hot rod and street rods. The cast iron construction is styled in the vintage "Rams Horn" design for maximum strength and engine clearance. The manifolds use smooth-transition, 1 5/8 in. diameter primaries for increased exhaust flow, which means improved performance and throttle response. The thick header flange pads ensure a strong, leak-free seal.
( 21 )
$259.95
$233.95
On Sale
Are you in search of a manifold that's the right fit at the right price? Look no further than Crown Automotive exhaust manifolds. They're constructed out of high-quality materials, while providing you with the correct replacement for your worn-out factory unit. Crown Automotive equips you with a durable, leak-free design that grants you a longer-lasting service life. The right exhaust manifold presents your vehicle with several benefits, such as increased gas mileage and reduced drive pressure and underhood noise.
( 24 )
$123.99
—
$217.99
$111.59
—
$196.19
On Sale
Summit Bucks
Mishimoto offers exhaust manifold stud kits for a variety of applications, including Cummins diesel inline 6-cylinder engines found on many Dodge and Ram trucks from 1994 and up. Machined from chromium-infused alloy steel for strength and corrosion resistance, these bolts are designed to increase the clamping force between the manifold and cylinder head—effectively minimizing the risk of boost-killing leaks and reducing the likelihood of manifold warpage. Anyone who has attempted to grapple a heavy manifold and turbocharger with one hand while attempting to line up a bolt hole with the other will appreciate the ease and convenience these stud kits provide. With 12-point hardware engineered to prevent nut rounding, gone are fears of stripped or rounded hardware.
Not Yet Reviewed
$117.95
$106.16
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$338.95
—
$479.95
$186.95
—
$263.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
