Availability
On Sale
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 288 )
$217.95
—
$249.95
$196.15
—
$224.95
On Sale
Scott Drake offers Street/Strip HEI distributors for a wide range of applications, including many Ford and Mercury cars, trucks, and vans from the 1960s, '70s, and '80s. These units are designed for the enthusiast looking to replace outdated points or a stock distributor with a dependable high-energy ignition distributor. Converting to an HEI system makes installation and set-up easy. Just drop it in and connect two wires—it's that simple! This high performance distributor features a 50,000 V coil that delivers 2x the energy across the spark gap compared to a stock HEI distributor. It will fit all 1964-84 Ford 302 motors (will not fit 1985 and later 5.0L/302 roller engines, and will not clear stock air cleaners).
Not Yet Reviewed
$149.95
$134.95
On Sale
FiTech Go-Spark HEI distributors are very popular choices for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple, clean installation and reliable operation. Plus, FiTech has addressed all the shortcomings typically found in economy replacement units. FiTech HEI distributors feature: * High performance 5.8 amp dwell limit module--standard GM 4-pin configuration * High-output, performance wound (130:1 high-turns ratio) coil ensures maximum spark energy at all rpm levels * Cap and rotor are molded in high-quality 20 percent glass filled polyester (PBT) that offers high-impact and dielectric strength while resisting carbon tracking * Cap contacts are brass and the rotor spring is stainless steel for long term maximum conductivity * CNC-machined aluminum housing * Centerless ground shaft rides * Extra-long lower bronze Oil-Lite bushings for smooth operation at high rpms * Mechanical advance is welded to the top of the shaft and is plated to reduce friction and prevent corrosion * Melonized iron drive gear ensures long service life * Adjustable vacuum advance allows increased economy while under light load
Not Yet Reviewed
$209.00
$177.65
On Sale
PerTronix Flame-Thrower tuneup kits not only make your tired stock HEI distributor young again, they make it better than it was before. The upgrade kits include many of the same components that make up PerTronix's powerful Flame-Thrower distributor: A 50,000 V coil and module; an alkyd cap and rotor; an adjustable vacuum advance canister; a high-performance advance kit; a wiring harness; a capacitor; and hardware. Order the model recommended for your year/make and engine application.
( 50 )
$179.30
—
$190.40
$161.37
—
$171.36
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 255 )
$165.50
—
$238.15
$148.95
—
$214.34
On Sale
Crown Automotive distributors deliver accurate trigger signals. When it's time to improve your ignition system, you can rely on Crown for quality direct-fit replacement parts. These distributors are constructed of cast aluminum housings and steel gears, magnetic or points-style triggers, and most have caps included. Hook one up to deliver the voltage from your coil to the spark plugs for reliable ignition!
( 18 )
$125.99
—
$148.99
$113.39
—
$134.09
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$125.95
—
$289.95
$113.35
—
$249.25
On Sale
FiTech Go-Spark distributors feature 2-wire magnetic pickups, compact bowl and cap designs to fit into locations where a larger or bulkier distributors will not, and adjustable advance systems, vacuum and/or mechanical, that allow you to dial in a timing curve for any high performance need or for more economy when cruising at light loads on the street or highway. CNC-machined housings, centerless ground shafts, Oil-Lite bushings, hardened drive gears, and FiTech's 3-year limited warranty make Go-Spark distributors very popular. Choose one for your vehicle. Features: * CNC machined 6061 T-6 aluminum housing * Centerless ground shaft that rides on an upper sealed roller or ball bearing * Extended length lower bronze Oil-Lite bushing for smooth operation at high rpms * Melonized or hardened iron drive gear ensures long service life * High-output magnetic pickups and paddle wheel reluctors ensure strong, stable trigger signals—even at higher rpms * Cap and rotor are 30 percent glass filled polyester (PBT) that offers high-impact and dielectric strength, and resistance to carbon tracking * Cap contacts are brass, the rotor spring is stainless steel for long-term maximum conductivity * Dual 2-wire magnetic pickup models available--pickups are placed 180 degrees apart to provide a complete redundant ignition system for racing applications * Height adjustment for deck height differences (not all Go-Spark models)
Not Yet Reviewed
$199.00
—
$295.00
$169.15
—
$250.75
On Sale
FiTech Go-Spark Ready-To-Run distributors have a built-in module for easy installation with a simple 3-wire hook up, negating the need to run an external ignition control box. They are perfect distributors for a crate engine or when replacing an old points-triggered distributor. Each one features a CNC-machined 6061 T-6 aluminum housing with a centerless ground shaft. The shaft rides on an upper sealed roller bearing with an extended length lower bronze Oil-Lite bushing for smooth operation at high rpms and extended service life. A high-output magnetic pickup and large paddle wheel reluctor provides a strong trigger signal at high rpms, while the built-in high performance inductive storage module supplies unrivaled energy to the coil ensuring maximum performance at all rpm levels. The fully adjustable mechanical advance is welded to the top of the shaft for easy access and is plated to reduce friction and prevent corrosion for long term durability. An adjustable vacuum advance canister allows you to dial in the ideal timing curve to meet your high performance or cruising needs. FiTech Go-Spark Ready-To-Run distributors have caps and rotors molded in high-quality 30+ percent glass fiber reinforced polyester (PBT) that offers both high-impact and dielectric strength while resisting carbon tracking. The cap contacts are brass and the rotor spring is stainless steel for long-term maximum conductivity. With FiTech's 3-year limited warranty, you can be confident in the quality performance of your Hot Rod. Select the ideal distributor for your vehicle.
Not Yet Reviewed
$309.00
$262.65
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$126.95
—
$145.95
$114.25
—
$131.35
On Sale
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 44 )
$126.95
—
$227.95
$114.25
—
$125.95
On Sale
MSD Pro-Caps are larger than standard caps, to handle more voltage. Each terminal is spaced exactly 2 in. apart to deliver spark to the right plugs with less spark scatter. The caps are molded from DuPont Rynite for maximum strength, and the rotors feature thick vanes, deep skirts, and a dual screw-down rotor tip for long life. The Pro-Cap bases bolt on to most MSD distributors.
( 4 )
$112.95
$101.65
On Sale
These Pro Mag replacement cap and rotor kits are injection-molded from Dupont Rynite material for high voltage insulation characteristics with heavy-duty construction. Inside the cap, there are thick vanes to help agitate the air to prevent the chance of crossfire. Stainless terminals are used for resistance to corrosion, caused by ozone in the cap. The rotor is also molded out of Rynite and features a brass/stainless steel rotor tip, plus a lock screw for secure mounting to the shaft.
( 2 )
$145.95
$131.35
On Sale
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$122.95
$110.65
On Sale
MSD Street Fire EFI distributors are ready to drop in your V8 engine and replace the worn-out OEM piece. They feature a factory-style ignition module, along with a durable new cap and rotor. The distributors use a cast housing, making them more affordable, but are much stronger than standard OEM distributors. The MSD Street Fire EFI distributors are available for both Ford and Chevy EFI engines.
( 26 )
$217.95
$196.15
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$112.95
$101.65
On Sale
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
$160.15
On Sale
PerTronix MAGX2 Ceramic boot wires are designed to prevent burnt wires from the high temperatures generated by your performance engine. Each wire is constructed from two layers of ultra-high temperature silicone and rated up to 600 degrees F. The ceramic boots provide protection to direct heat up to 2,000 degrees F. Available in universal sets with straight, 45 or 90-degree boots, these kits include the distributor boots and terminals for both male and female style distributor caps. Additional notes: * Two paths for the current: Features a spiral wound stainless steel alloy wrapped around a carbon impregnated fiberglass center core * Low 500 ohm per foot resistance
( 4 )
$145.85
$131.26
On Sale
Maximize your engine's potential with the FiTech Go-Spark ignition box and coil kits! You've got the fuel, now upgrade the spark with the FiTech Go-Spark Capacitive Discharge Ignition! The Go-Spark CDI produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. The Go-Spark CDI was designed for 4, 6, and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tach. Plus, high-energy coil enhances CDI performance. Go-Spark CDI features: * Produces series of sparks below 2,500 rpm * Boosts starting power, idle quality, and throttle response * High energy coil enhances CDI performance * Delivers full energy sparks through racing rpm * Ensures complete combustion of fuel mixture * Accepts Trigger Signal from variety of distributors (distributor not included) * Usable with separate 12-volt Square Wave Tach Output
Not Yet Reviewed
$269.99
$229.49
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$172.95
$155.65
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$118.95
—
$190.95
$107.05
—
$171.85
On Sale
These Cyclone intake manifolds from Professional Products are designed to fit engine swaps using the 1996 and later Vortec cast iron heads or the Edelbrock E-Tec aluminum heads. These manifolds can be used on any Chevy V8 engine utilizing the late Vortec head. They have a provision for an external water bypass. These Cyclone Vortec intake manifolds feature 4-corner water outlets, dual distributor hold-downs, a square bore carb adapter and gasket, and will work with late model style water neck, alternator, HEI, and air conditioning brackets.
( 19 )
$173.99
—
$212.99
$156.59
—
$191.69
On Sale
For the Saturday night racer, MSD circle track digital soft touch rev limiters produce a smooth, accurate rev-limiting action. They feature two rotary dials with an easy-view LED display, eliminating the need for plug-in rpm modules. A unique feature is each unit's ability to record the highest rpm reached during a race—which is helpful information for racers and tech officials alike. MSD rev limiters are epoxy filled to protect against the abuse of dirt track racing.
( 13 )
$249.95
$224.95
On Sale
Enjoy better reliability and performance with FiTech Go-Spark ceramic spark plug wire sets. Each spark plug is preassembled from ceramic and carefully crafted with the proper end angles in mind, sparing you the hassle of custom trimming. Select the spark plug wire set designed for your application needs.
( 1 )
$135.00
$114.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
