Availability
Showing In Stock Items. Show All 43 Items.
On Sale
Yukon Gear and Axle wheel bearing and hub assemblies are top-quality replacement components designed to improve safety and reduce friction from wear for front and rear applications. Save your time and money while enhancing your ride's performance with Yukon Gear & Axle wheel bearing and hub assemblies. Order the assembly designed to fit your application.
( 1 )
$185.99
—
$283.99
$158.09
—
$241.39
On Sale
B&M flexplates are tough enough to handle severe applications and are ideal for 6,000+ rpm usage. They have precision-stamped centers and a rust-resistant, gold iridited finish. Some units are SFI-approved and are NHRA/IHRA-legal for all classes.
( 176 )
$169.95
—
$194.95
$152.95
—
$175.45
On Sale
Have you ever heard someone say, "I can't get this dang thing into 4-low"? Crown Automotive transfer case rebuild kits are available for most Jeep models with small parts through master overhaul designs. The parts in these kits are OE quality for excellent fit and reliability. Make certain to check the notes for the correct unit for your application. Transfer cases are strongly built for years of service, but occasionally need rebuilt. Crown Automotive transfer case rebuild kits have the parts you need to do the job right.
( 16 )
$229.99
$206.99
On Sale
Crown Automotive clutch slave cylinders enable you to shift properly again. These units are available in different materials and types for several applications—including many Jeep, Chrysler, Plymouth, and Dodge models. The cylinders are direct replacements that offer the right fit and long-lasting service. Maintain the operation of your clutch assembly with Crown Automotive clutch slave cylinders.
( 2 )
$188.99
$170.09
On Sale
Yukon Gear & Axle offers differential carriers for a wide range of applications. Yukon uses top-quality materials and the latest manufacturing technologies to produce strong, durable carriers that you can depend on for proper traction. These aftermarket units are available in a variety of styles—such as limited-slip, open, Traction-Lok, and locker—for fitment on dozens of axle models and vehicle apps.
( 13 )
$265.99
—
$270.99
$226.09
—
$230.34
On Sale
Centerforce I pressure plates are the original Centerforce pressure plates. They offer 30 percent more holding capacity than original-equipment clutches, while maintaining a stock pedal feel. Patented centrifugal weights on some applications yield increased clamping force. These pressure plates are recommended as the finest-quality upgrades from stock and stock-type units.
( 10 )
$152.95
—
$272.95
$137.66
—
$245.66
On Sale
That strange noise you hear when cornering or making sharp turns may be a telltale symptom of worn-out bearings. Crown Automotive wheel bearing and hub assemblies allow you to repair these crucial safety and handling components with quality replacement units. Return to the handling and performance you expected when the vehicle rolled off the factory line. These assemblies are available in numerous variations for fitment on a wide variety of makes and models.
( 4 )
$143.99
$129.59
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$435.95
$239.95
On Sale
EBC CKF carbon fiber lined MX race clutch plate sets are built tough to last longer, grip better, feel better, and drive better than stock cork-based units. Plus, the high-heat ability of EBC CKF carbon fiber-lined MX race clutch plate sets handle much higher stresses and temperatures encountered in racing yet feel gentle and smooth in everyday riding. One day, all Motocross bikes and ATVs will be built using a clutch like this, but for now the only way to get the best clutch in the game is to step up to EBC CKF carbon fiber-lined MX race clutch plate sets.
Not Yet Reviewed
$117.93
—
$163.40
$106.14
—
$147.06
On Sale
Frame your Dana 44 with the strength of Artec Industries 44 rear axle trusses. These heavy-duty units fortify your entire axle to take on and survive off-road abuse. They also provide a low-profile, flat surface to mount your upper control arms in a 4-link setup. Artec 44 rear axle trusses feature precision CNC-cut and bent 1/4 in. thick truss tops and interlocked gussets for maximum strength. Tie your axle to Artec 44 rear trusses and gain the stamina to crawl, climb, and conquer any off-road terrain.
Not Yet Reviewed
$291.99
$218.99
On Sale
Quicksilver Flo-Torq propeller hub kits are designed for use with many of the most popular Quicksilver and Mercury props on the water. Quicksilver Flo-Torq SSR solid propeller hub kits offer quieter shifting and smoother operation than traditional hub kits, while protecting the drive unit from impact damage. SSR hub kits feature Soft-Shift Rubber technology that helps prevent shifting noise and propeller rattle to deliver a quieter, smoother, delivery of your engine's power to the propeller. Each kit includes the thrust washer, SSR drive sleeve, drive sleeve adapter, tabbed lock washer, and locking prop nut.
Not Yet Reviewed
$114.80
$103.32
On Sale
Yukon Gear & Axle offers front and rear hub replacements for a variety of vehicles and axle applications, from 1955 and up. These steel units are available in different styles and finishes. Order the model recommended for your upgrade.
( 1 )
$239.99
$203.99
On Sale
Pinions use either a yoke or flange for mounting driveshafts, with both having advantages and disadvantages. Crown Automotive pinion flanges are great replacements for stock units, and an excellent upgrade for hardcore off-roaders. Their tough, but smooth rounded surface glides easily over rocks, and there's no need to take the flanges off to change driveshafts. Whether you're upgrading an axle or replacing parts, always use Crown Automotive pinion flanges.
Not Yet Reviewed
$181.99
$163.79
On Sale
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 106 )
$143.99
—
$325.89
$122.39
—
$277.01
On Sale
Spartan lockers are affordable, reliable traction. These USA Standard Gear Spartan lockers are mechanical lockers that fit into a standard differential carrier, replacing the open spider gears. They do not use thrust washers and have a revolutionary spring and pin design to make installation a snap! Spartan lockers feature high-nickel 9310 chromoly drivers and couplers for added strength. Give your vehicle great traction and save some cash. Drop in Spartan lockers for improved traction. They're available for a variety of makes and models spanning more than a half-century.
( 31 )
$255.00
$229.50
On Sale
USA Standard Gear master overhaul kits have everything you need to properly rebuild the differential in your vehicle. They let you finish your ring and pinion gear installation or axle rebuild with confidence. These install kits offer a lower price alternative when costs must be kept down. Most USA Standard Gear master overhaul kits include: * Pinion bearings and races * Pinion shims * Carrier bearings and races * Carrier shims * Crush sleeve (if applicable) * Slingers (where used) * Pinion seal and nut * Ring gear bolts * Cover gasket or gasket maker (RTV) * Marking compound with brush * Thread locker
( 31 )
$117.99
—
$402.99
$106.19
—
$342.54
On Sale
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 157 )
$114.99
—
$370.89
$103.49
—
$315.26
On Sale
Yukon Gear & Axle differential carrier cases offer the strength and quality you demand for your ride. Available for many axles and ratios, these cases are constructed from first-rate materials to strict standards, ensuring durable, reliable performance.
( 21 )
$115.99
—
$278.99
$104.39
—
$237.14
On Sale
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 25 )
$228.89
—
$228.99
$194.56
—
$194.64
On Sale
Clearance
USA Standard gear axle shafts are high-quality replacements machined from steel for superior strength and performance. They're available for dozens of differential case design applications, such as AMC, Ford, GM, Chrysler, and Dana. The shafts are offered in nearly a hundred lengths and numerous wheel stud patterns. Order the model recommended for your vehicle.
( 36 )
$118.99
—
$343.99
$101.14
—
$292.39
On Sale
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 50 )
$233.99
—
$400.99
$198.89
—
$340.84
On Sale
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$125.99
—
$298.99
$111.34
—
$254.14
On Sale
Yukon Gear & Axle axle bearings are made from top-quality materials to original specs, so you can be sure that you're getting a quality product. These replacements are available for a variety of axle model applications, from the 1950s and up.
( 74 )
$124.99
—
$326.99
$106.24
—
$277.94
On Sale
Clearance
Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. Yukon Gear & Axle 4340 chromoly axles provide up to 50 percent more strength than stock axles … critical for extreme performance applications with large tires, high torque and high horsepower. These 4340 axles are manufactured using the latest technologies and the highest quality materials for long life in off-road, street and track use. Yukon Gear & Axle 4340 chromoly axles are offered in complete kits or individually.
( 36 )
$156.99
—
$323.99
$133.44
—
$275.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
