Availability
Showing In Stock Items. Show All 11 Items.
On Sale
Stillen offers a wide range of performance parts, including the Trupower air intake scoops for a variety of vehicle makes and models. The factory air intake system on various Chevrolet Silverado/GMC Sierra vehicles is a very unique and creative design. There is no natural path for the air to flow through. The air must travel up the face of the radiator in order to make its way into the air intake opening. Keep in mind the radiators operational temperature is 180-220 degrees—significantly higher than ambient. To solve the issues with this otherwise, fantastic design the team at Stillen created a proper scoop—the Trupower, which lowers the base of the radiator shroud to be in line with the top bar of the vehicle's grille. This design allows for air to come directly into the intake system without being warmed by the radiator or disrupted by lattice type material in the radiator shroud, which eliminates the pre-heating and turbulence caused by the factory system. Order the model designed for your vehicle. Features and benefits: * Direct cold airflow * Reduced (intake) air temperatures * Textured finish for OEM fit and finish * Compatible with air intake or supercharger that uses factory air intake scoop * Easy installation
( 3 )
$211.37
$190.23
On Sale
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$219.95
—
$329.95
$197.96
—
$296.96
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$449.95
—
$499.95
$247.95
—
$274.95
On Sale
XDR Performance air intakes contain high-quality components with a custom look, and offer an easy install without any cutting, drilling, or special tuning necessary. Available in two different kits, one features a crosslinked polyethylene (XLPE) tube and the other a silicone tube. Both deliver high-flow, maximum performance, and great style for your Side x Side. Both kits also include a serviceable, high-flow, 8-panel cotton gauze filter for long life and increase airflow, plus a pre-filter wrap to keep the filter clean when used in dusty environments, stainless steel hardware, and black anodized aluminum fittings. And, of course, XDR's Performance air intakes are backed by their Lifetime Limited Warranty.
Not Yet Reviewed
$269.95
$148.95
On Sale
Get more performance from your Steeda air intake kit! These replacement air intake tubes are molded from high-quality ABS plastic or aluminum, with a smooth inside surface to increase the velocity of incoming air. They allow for colder air induction temperatures, resulting in less heat soak and lower air charge temperatures. The tubes are available in a variety of configurations for fitment on Ford vehicles from 2005 and up.
( 3 )
$144.95
$130.46
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
$188.96
On Sale
APR turbocharger inlet systems are designed to outflow the factory components. These inlet systems use a 4 in. carbon fiber inlet tube that connects directly to the factory air box. These kits also include a cast aluminum inlet, which is designed to retain the largest possible cross-sectional area within the pipe all the way to the inlet of the turbocharger's compressor cover. Making the cross-sectional area large is the key to the performance gains of these kits. Upgrade your ride with an APR turbocharger inlet system today!
Not Yet Reviewed
$324.95
$211.95
On Sale
COBB Tuning turbocharger inlets replace your restrictive, so-so looking factory hose with increased performance and style. They feature silicone construction that rejects high engine bay temperatures and keeps the intake air closer to ambient temperature. The steel wire-reinforced design eliminates the issue of hose collapse that other inlet hoses suffer under vacuum at peak demand—yet allows adequate flex between the engine and the intake to prevent any connection separation. Take the open path to greater efficiency and power; increase the airflow delivery to your turbo with high-flowing COBB Tuning turbocharger inlets. They're available in various sizes for specific vehicle and engine applications. Additional features may include: * Multi-ply (4 or 5-ply, depending on inlet chosen) steel-reinforced silicone * Many are direct OEM replacements or are designed to work with stock and stock-sized intakes * Most are available in Stealth Black or COBB Blue
Not Yet Reviewed
$230.00
$207.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
