Availability
Showing In Stock Items. Show All 74 Items.
Hinson Racing has been creating race-proven and champion-selected clutch components for over two decades. Hinson Racing FSC clutch plate and spring kits are manufactured to their strict standards, to enhance the performance of Hinson clutch baskets. While they are race-engineered components, they are also able to be used with OE baskets, inner hubs, and pressure plates. Designed for exceptional performance under extreme conditions, Hinson components have exceptional production tolerances and flatness. High performance with minimal heat buildup, they are made to last.
( 2 )
$199.99
B&M governor recalibration kits will allow you to adjust the shift points of your transmission after it is installed in your vehicle. These kits are very useful for transmission swaps, or if you have a car that is very light or has a low rear gear ratio. They also work great for bracket cars retaining an automatic 1-2 shift.
( 34 )
$125.95
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 9 )
$125.14
Auto Metal Direct clutch linkage sets are complete with all AMD individually-available, technically-correct components required—from pedal to clutch fork. The components are heat-treated with the correct protective finishes as the originals. Auto Metal Direct clutch linkage kits include: * Upper push rod, rod boot, and clips * Frame side bracket * Block side stud with seal * Frame side ball stud with nut and washer * Bellcrank felts * Lower adjustable rod * Return spring * Spring extension plate * Clutch fork to bellhousing rubber boot * Bellcrank assembly with installed pivot kit and zerk fitting * Assembly diagram
( 11 )
$124.99
—
$139.99
Sonnax Sure Cure automatic transmission rebuild kits are a comprehensive reconditioning package—featuring the best Sonnax products developed to help mechanics restore and enhance transmission performance. Sure Cure components are the same Sonnax parts sold individually to resolve common valve body complaints, as well as other transmission problems. The high-quality components in each Sure Cure kit will repair worn areas and protect the transmission against future damage. Plus, each kit comes with an easy-to-read, step-by-step installation guide that covers inspection and repair of the most critical areas of the valve body. Additional features and benefits: * Restore shift quality and reduce comebacks * Repairs biggest trouble areas to reduce comebacks * Includes step-by-step instructions for comprehensive valve/pump body restoration Kits Include: * Shims (2) endplay * Pump slide pivot pin * Throttle valve plunger valve kit * Shortened TV link * TV cable corrector kit * Seals D-ring servo * 1-2 or 3-4 accumulator spring * Servo release check valve kit * Reverse boost valve kit * Oversized pressure regulator valve * Pinless 1-2 or 3-4 accumulator piston kit * TV boost valve kit * Bushing pump * Bushing rear stator support * Checkballs
( 6 )
$100.75
—
$176.90
EBC is known for its manufacturing expertise and top-notch products. EBC SRK sport racer clutch kits are no exception. These kits include Aramid fiber-lined friction plates and steel separator plates and springs to provide street-going kits for high performance street and road racing. Some EBC sport racer clutch kits will feature new diaphragm springs, like the ones used in many larger bikes, to provide a complete clutch rebuild kit for every sport bike possible. If you ride hard and need the best, get yourself EBC SRK sport racer clutch kits.
( 4 )
$159.91
—
$274.37
EBC SRC Street Racer clutch kits are the latest KEVLAR® fibre-lined clutches for sport bikes and racers. These replacement clutch kits are complete engine sets, matched and measured and stack height controlled to provide the perfect clutch rebuild. The kits come complete with 15 percent up-rated heavy-duty clutch springs and a KEVLAR® disc with impregnated lining. They're available for a wide range of motorcycles, from the 1970s and up. Order the kit recommended for your application.
Not Yet Reviewed
$101.14
—
$220.61
By far the best way to go, EBC DRC Dirt Racer clutch kits are total rebuild options, including all-driven lined plates and new springs to completely reset your clutch to the all-important original stack height from when the bike was new. DRC Dirt Racer clutch kits give smooth clutch take-up, using anti-swelling, alloy-impregnated, heavy-duty, cork-based facing for long-lasting and reliable clutch kits.
( 1 )
$101.14
—
$261.08
Pro-X Racing complete clutch plate sets offer the best performance in powersports. Their sets contain complete packs of matched friction and steel plates, along with a set of clutch springs. Pro-X clutch plate sets deliver friction plates and steel plates manufactured to exact OEM specifications, mated with heavy-duty clutch springs that are approximately 10 percent stiffer, to provide you with the ultimate clutch performance. Get the most out of your powersports ride for your MX or ATV, install Pro-X Racing complete clutch plate sets.
Not Yet Reviewed
$109.99
—
$224.99
Having trouble getting into gear? Your synchronizer could be worn. Crown Automotive offers manual transmission synchros to restore smooth, accurate shifts. They will prevent gears from grinding during engagement and facilitate optimum performance. You can choose from the wide selection of applications available. Renew your shifting performance—get your collar and gears in sync with Crown Automotive manual transmission synchros.
( 2 )
$121.99
—
$151.99
Twin Power extra plate clutch kits are the perfect solution for your high-performance and stroker engine needs. These kits feature race proven material friction plates on tempered steel cores, and a starburst groove pattern for maximum heat dissipation and oil circulation. All of the clutch plates are manufactured from high tempered steel and each kit comes complete with a pre-set clutch pack height (stock spec) for easy installation. A result of years of development and testing, these Twin Power extra plate clutch kits offer you superior performance to get the power to the ground!
Not Yet Reviewed
$180.37
—
$256.03
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 378 )
$100.99
—
$217.99
Sonnax shift improver performance packs combine innovative heavy-duty performance calibration for firmer shifts under load without sacrificing low-speed drivability. The precision components in these kits upgrade your transmission for maximum achievement and durability by recalibrating pressures, recalibrating shift accumulation, and including improved parts for areas that commonly wear. They are suitable for any heavy-duty application and are a critical foundation for other upgrades when modifying the transmission for high performance use. Sonnax shift improver performance packs additional facts and features: * Shorter shifts, which get progressively firmer with load * Faster pressure increase and higher overall pressure for greater clutch/band holding power * Three ultra-reliable, patented, billet pinless accumulator pistons * Unique 1-2 accumulator spring combination for shifts with character * Improved high rpm pressure * Third accumulator valve gets the 2-3 right the first time, every time * Consistent results, no guessing on calibration * Prevents worn accumulators and separator plate * Optional TCC on-off conversion prevents excess TCC pressure
( 6 )
$166.99
—
$205.10
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$108.99
—
$258.99
Sonnax C ratio servo kits offer greater holding power, giving cleaner, firmer 1-2 and 2-3 shifts. They are machined from 6061 aluminum billet and feature lip seals on the piston for superior sealing over a wide range of fluid pressure. The C ratio servos are the largest in the C4 family, and will work equally well in performance C5 applications. The pins incorporate two PTFE sealing rings to insure the hydraulic integrity of the pins in worn cases. Experience firmer shifts with Sonnax C ratio servo kits. Kits include: * Piston * Cover with either purple anodized or machined finish * Servo pin with seal grooves * Gasket * Retaining ring * Spring * PTFE seals * Large and small lip seals
( 1 )
$224.07
ACT race clutch discs are available in three distinct styles--choose the options that best suit your application. Spring-centered discs are the most popular and feature reduced driveline shock and spline wear with quieter operation. Rigid-hub versions offer improved durability but increase gear noise and spline wear. For either of those hub designs, you can choose six pads for better heat management and engagement, or four pads for the quickest shifting. Sintered iron discs offer the highest torque capacity and ultra-high heat capacity. They're designed for cars using clutch-less shifting or drag racing transmissions. Additional product details: * Premium ceramic friction materials provide high-heat tolerance, high coefficient of friction, and low wear rates * Carefully broached splines provide exact fit onto the transmission input shaft for long spline life and better clutch release * Heavy-duty torsional dampening springs are provided in the best sizes and spring rates to help reduce noise * Drive plates are made of high-carbon steel; heat-treated and black zinc coated to resist bending, cracking, fatigue, and rusting * Certified to SFI specifications
( 23 )
$156.00
—
$255.00
Nic Woods Racing Shockwave clutch rebuild kits include the components needed to overhaul your clutch. Choose between 7.90, 7.90 HD, 8.90, or the 11.90 kit. Kits include: * Primary steel coated rollers * Primary plastic rollers * Secondary spray coated helix rollers * Driven spring and primary spring * Rollers include new stainless steel hardware
Not Yet Reviewed
$192.50
—
$199.00
Whether your ride has just been mildly modified or transformed into a real fire-breather, you need to consider RAM competition pressure plates. They're available in both fixed and adjustable static-pressure configurations, incorporating explosion-resistant plates made of steel or aluminum—plus features such as chrome-vanadium springs, heavy-duty covers, and high-strength hardware. RAM produces the three major types of pressure plates: diaphragm, with its reasonable pedal pressures and quick, clean releases; and the more heavily competition-oriented Borg & Beck and long styles. For drag racing, Circle Track, or Street/Strip applications, RAM supplies the clutch performance parts you need.
( 15 )
$159.00
—
$249.00
On Sale
Hays high-performance throwout bearings are designed to withstand the high spring pressure and high-rpm conditions common to racing clutches. They're heat-treated and Blanchard-ground to ensure trueness.
( 21 )
$102.95
—
$110.95
Aisin clutch kits combine high-quality clutch components to deliver optimal drivetrain efficiency. Providing excellent power transfer with precise pedal feel, they are always OE-matched. Kits include clutch cover and disc, release bearing, pilot bearing (where applicable), and a vehicle specific alignment tool for trouble-free installation Additional features of Aisin clutch kits include: * "Hot Seating" process stabilizes the diaphragm spring * Diaphragm spring turnover (DST) cover improves release * Higher load capacity * Premium-quality, heat-resistant, and less abrasive facings ensure extended service life * Disc spring design enhances engagement and release * Floating rubber cushions or twin-hub design improve rigidity to reduce noise, vibration, and harshness
( 4 )
$182.99
Ram 6000 Series clutch paddle discs are designed for competition or severe-duty street use. Sintered bronze metallic buttons provide crisp, clean engagement. This aggressive material allows you to use less static pressure in the clutch and achieve comparable holding power. All 6000 Series discs use the poly-coil hub damper spring for increased disc life and unmatched dampening qualities.
( 2 )
$101.00
—
$239.00
ATI torsional input shafts work like a torsional spring bar--twisting and returning to totally eliminate breakage, while reducing shock loads to the gear train. They are manufactured from top-quality 300M or Vasco for maximum durability. Available for GM Powerglide or TH400 splines, these ATI torsional input shafts will add some reliability to your drivetrain.
( 11 )
$189.95
—
$219.95
ACT Performance clutch discs provide quicker engagement with quiet operation. These performance discs are built with premium organic material with increased friction and high copper content for better heat transfer—and steel-backed linings for a greater burst of strength and durability. For faster shift action, ACT clutch discs are modified with reduced marcel, and the heavy-duty center hub springs help keep action smooth. ACT Performance clutch discs afford you quality and value that will outlast and outperform the competition. Order the model designed for your vehicle application.
( 2 )
$179.00
—
$224.00
RAM clutches for 'stock clutch rule' classes give you unmatched performance and durability. The 10.5 in. diameter assembly utilizes a billet aluminum pressure ring with a riveted steel heat shield that provides a durable mating surface for the clutch disc. A 3,000 lb. pressure spring provides increased static pressure over stock clutches. Used in conjunction with a RAM 6-paddle solid hub disc, this combination weighs in at just over 15 lbs. If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 lbs. to the total weight of the set. RAM offers a lightweight 17 lb. billet steel flywheel for Chevrolet that matches the above components. If you are required to use all-steel components, RAM offers a similar 10.5 in. pressure plate with a nodular iron pressure ring. This unit uses the same heavier pressure spring for increased holding power. All RAM street stock clutches are completely rebuildable.
Not Yet Reviewed
$129.00
—
$199.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
