Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
26 Results Found For "controller"
Showing In Stock Items. Show All 39 Items.
Z Automotive Jeep JL/JT Z-Locker OEM Controller Harnesses
The locker sensor in Wrangler JL and Gladiator Rubicons have started to become problematic. When they fail, it usually starts out as a blinking locker indicator on the dash, which then ends up in a "service axle locker" message and the lockers will no longer engage. The repair would normally be to replace the sensor or the locker assembly, but they are not available, so the entire axle assembly needs replaced. Developed in a partnership with Americas Most Wanted 4X4, Z Automotive Jeep JL/JT Z-Locker OEM controller harnesses provide a simple fix for faulty OEM axle locker. Each harness will bypass the problematic sensor, allowing the locker to operate without the position sensor and provide the proper feedback to the Jeep's computers to keep the system operational without any errors or warnings. You get fully functioning lockers with no side effects. Installation is simple and they will not harm the Jeep's computers as they use the same signaling that it expects from the sensor. The connectors are the same ones used by Jeep and are watertight.
( 29 )
$179.00
Z Automotive Jeep JL/JT Z-Locker Controller Harnesses
Z Automotive Jeep JL/JT Z-Locker controller harnesses are plug-and-play solutions to aftermarket locker integration using factory locker controls on Wrangler JL and Gladiator Rubicons. These simple adapters use watertight connectors, a potted design, and automotive-grade internal components to last in the harsh Jeep undercarriage environment. One end of each adapter plugs into the 4-pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied. The other end is a 2-pin connector which will output 12 V to engage your E-Locker or Air Locker solenoid. Z Automotive Jeep JL/JT Z-Locker controller harnesses retain the factory locker switches, dash messages, warnings, and will even set off the "service locker" message if your aftermarket locker is faulty or gets disconnected.
( 1 )
$179.00
Motive Gear Ring and Pinion Sets
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 285 )
$131.99
—
$247.99
Richmond Gear EXCel Ring and Pinion Sets
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 144 )
$148.45
—
$248.70
4x4 Posi-Lok Positive Axle Engagement Systems
Replace your slow, unreliable vacuum or electric front axle engagement system with one of these 4x4 Posi-Lok cable activated systems. The Posi-Lok systems give you direct control of your front axle right from your cab, so they will engage every time. They have a short 1 in. throw to make shifting on the fly easy, and as an added bonus, a 2WD low-range to give you the rear-wheel torque of 4-LO, and the bind-free steering action of 2-HI.
( 338 )
$174.95
RT Off-Road Mechanical Axle Engagement Systems
RT Off-Road mechanical axle engagement systems replace the vacuum actuator with a cable operated actuator that puts the driver in control of the engagement from inside the cab. The axle engagement is much more reliable since it is directly controlled with the cable. Kits are available for Jeeps with a lift kit up to 3 in., and for lifted applications 3 in. or higher.
( 6 )
$133.99
Spicer Drivetrain Products Front Axle Shafts
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 131 )
$101.99
—
$248.99
Eaton Posi Limited-Slip Gear Service Kits
Eaton posi kits are the perfect way to keep wheel traction under control in street rods, light-duty pickups, and everyday drivers. These posi limited-slip gear service kits are designed to replace those worn gears or broken washers that you may have inside of your Eaton posi differential carrier. Depending on your axle model or application, these kits typically include the necessary gear components and hardware to perform a quality rebuild.
( 7 )
$246.99
Ford Genuine Parts 4WD Actuators
Ford Genuine Parts 4WD actuators are the perfect-fit replacements to help you fix 4x4 engagement issues. If your actuator is sticking, vacuum will remain applied to your wheel hubs, keeping them disengaged, and leaving you without 4WD. Ford Genuine Parts 4WD actuators will control vacuum and allow engagement, restoring your 4x4 power.
( 2 )
$143.99
—
$199.99
Motive Gear Performance Ring and Pinion Sets
Motive Gear Performance ring and pinions are perfect for dedicated racing or off-road vehicles. Their gear sets are made from first-run steel, they never use recycled metal. This allows Motive Gear Performance ring and pinions to handle the extreme torque from high-horsepower racing engines. Extensive engineering, computer-controlled heat treatment, superior strength, quality and the widest selection of racing gear ratios, makes Motive Gear Performance ring and pinions the clear winner! Engineered to the highest standards, every Motive Gear Performance product goes through rigid quality control processes in their in-house lab. Motive Gear Performance also offers a lightweight alternative to standard ring and pinion gear sets. Their AX Series ring and pinions are designed to increase horsepower and efficiency by removing rotating weight. Professional race teams have used custom-lightened drivetrain parts for years, resulting in faster times and more wins. The AX Series gears from Motive are lightened during the manufacturing process; this results in gear sets that have been engineered, not modified. Computer-controlled heat treatment, index tooth spacing, and CNC machining all go into AX Series performance gear sets. Motive Gear Performance: What the pros run!
( 195 )
$209.00
—
$245.81
SVL Drivetrain Ring and Pinion Gear Sets
SVL Drivetrain ring and pinion gear sets make it easy to find the right ratio for your application. Engineered and manufactured for all makes and ratios, they deliver the ideal blend of coverage, performance, and value. SVL starts their ring and pinion sets with a computer-generated gear summary. From there, the gearing is forged from alloy steel for optimal hardness; then the gears are cut with the utmost accuracy to ensure the smoothest possible ride—and computer-controlled heat-treating results in extra wear resistance. In the final stage of the process, the ring gear is mated to the pinion through gear lapping, which provides ideal meshing of the gearing. You can count on SVL Drivetrain ring and pinion gear sets to fit and function as expected in your automotive application.
( 30 )
$162.99
—
$249.99
Motive Gear Open Differential Internal Kits
Motive Gear open differential internal kits are an efficient and economical solution for rebuilding your worn-out carrier components. They're available for a wide range of axle models, and typically include replacement gears and hardware necessary to restore traction and control you depend on. Don't take a chance by reusing old gears or worn washers when performing a differential rebuild. Reduce future carrier problems and order the Motive Gear open differential internal kit designed to fit your application.
( 35 )
$109.99
—
$233.99
On Sale
Artec Industries JK Rear Axle Trusses
Artec Industries JK rear axle trusses are designed to take serious abuse and reinforce your axle, while also providing a flat surface to mount your upper control arms in a 4-link setup. The 10-gauge, 1/4 in. mild steel truss tops incorporate a unique design to strengthen the axle—and provide a low-profile mounting height/surface for an aftermarket 3-link suspension system, if desired. Precision CNC-cut and bent for great fitment, Artec Industries JK rear axle trusses span the entire length between spring buckets. They're reinforced using interlocked 10-gauge thick dimpled gussets for maximum strength and easy assembly.
Not Yet Reviewed
$131.99
$105.59
On Sale
Artec Industries TJ Front Axle Trusses
Artec Industries TJ front axle trusses offer options for beefing up your axles. These front axle trusses are presented in two axle models and three upper control arm options. They're heavy-duty, lightweight support systems that strengthen your axle against serious abuse with 1/4 in. thick mild steel truss tops and 10-gauge gusseting. Artec precision-cut and formed components of this setup ensure a hassle-free installation. Reinforce your axle's performance with solid options from Artec Industries TJ front axle trusses. Axle model options: * 30 low pinion * 44 low pinion Upper control arm options: * Truss only—no bushings/joints/keyed tabs included * Truss with Daystar bushings—includes bushing, inner sleeve, and thrust washer for driver side; and bushing, weldable outer sleeve, inner sleeve, and two keyed tabs for passenger side * Truss with Currie Johnny Joints—includes 2.0 in. press-in machined Johnny Joint, 2.0 in. weldable Johnny Joint, two keyed tabs for passenger side, and greasable bolts for both joints
Not Yet Reviewed
$153.99
$123.19
Spicer Drivetrain Products Rear Axle Shafts
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$204.99
—
$232.99
Sierra Marine Shift Cable Components
Sierra Marine offers dozens of shift cable components for a wide range of watercraft applications—including control box repair kits, shafts, sleeves, rod bushings, and seals. Each part is manufactured with factory materials in accordance with OE specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$146.99
Spicer Drivetrain Products Direct-Fit Axle Shaft Assemblies
You never compromise performance when choosing Spicer direct-fit axle shaft assemblies. Quality materials, precision manufacturing, and controlled testing deliver strong, safe axles that meet high standards—even by OE criteria. So, when you need to refit an axle shaft assembly, choose the direct fit of Spicer Drivetrain Products—assemblies engineered to work together.
( 7 )
$109.99
—
$152.99
Powertrax Replacement Active Spacers
These Powertrax replacement active spacers allow the synchro ring to rotate. They then stop the synchro ring, thereby controlling the specific amount of overlap of the synchro ring teeth, relative to the extended teeth of the driver.
( 2 )
$105.99
Dorman Axle Shafts
Do you have a twisted or broken axle? Dorman offers roughly 100 replacement axle shaft kits to remedy the problem. They're available in various styles, as well as dozens of precise lengths and spline counts for direct fitment on any corner of your vehicle. Dorman axles include components manufactured from quality materials—designed to install in the stock location without any modifications. Get your vehicle rolling again with dependable Dorman axle shaft kits.
( 152 )
$171.99
—
$246.99
Clearance
Richmond Gear EXCel OEM Replacement Axle Shafts
Get a perfect fit and dependable performance with Richmond Gear EXCel OEM replacement axle shafts. They are made from top-quality steel and are available for a very wide range of applications.
( 121 )
$145.99
Yukon Gear & Axle 1541H Alloy Axles
Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns
( 158 )
$211.99
USA Standard Gear Axle Shafts
USA Standard gear axle shafts are high-quality replacements machined from steel for superior strength and performance. They're available for dozens of differential case design applications, such as AMC, Ford, GM, Chrysler, and Dana. The shafts are offered in nearly a hundred lengths and numerous wheel stud patterns. Order the model recommended for your vehicle.
( 36 )
$150.99
GSP New CV Axle Assemblies
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 89 )
$102.99
—
$106.99
Motorcraft Axle Shafts
Motorcraft axle shafts deliver quality, value, and durability. They're available to fit your Ford vehicle with the proper function and the expected performance. Replace your worn-out axle shafts with the units made especially for your vehicle from Motorcraft.
( 2 )
$192.99
