Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
39 Results Found For "ls tools"
Showing In Stock Items. Show All 46 Items.
Trick Flow® Flywheel Holding Tools for GM LS
Torque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS. These specially made tools will hold your crankshaft in place while you properly torque down your harmonic balancer bolt. These tools are designed to work on engines mounted to an engine service stand or an engine already installed in the vehicle. They are even slotted, so they can be used on LS engines that have been swapped into older vehicles utilizing flywheel spacers!
( 20 )
$104.99
Summit Racing™ Pro LS Main Cap Pullers
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$205.99
Lingenfelter Performance Engineering LS Engine Valve Spring Compressor Tools
With Lingenfelter Performance Engineering LS engine valve spring compressor tools, in-car valve spring changes have never been easier for the home hot rodder. Designed to work on C6, C5, F-bodies and all LS1 powered vehicles, they are crafted of billet aluminum and incorporate a steel roller bearing trunion for ease of operation. They work with any 3/8 in. hand ratchet; simply add a 3/8 in. extension for valve springs which are difficult to reach (under cowl), and will work on factory conical valve springs, along with aftermarket 1.25 O.D. spring/retainer sets. For anyone changing camshafts with more than .500 valve lift, Lingenfelter Performance Engineering LS engine valve spring compressors are a must!
( 3 )
$103.50
Summit Racing™ Manufacturing Harmonic Balancer Puller and Installers
Summit Racing™ Manufacturing and Engineering harmonic balancer puller and installers feature a roller thrust bearing, a puller plate milled to accept a variety of bolt sizes, and CNC-machined components with a black oxide finish. They come complete with four heat-treated 4140 chromoly installer studs, puller bolts, instructions, and a storage case. The installers include our Summit Racing™ harmonic balancer wrenches to rotate the crankshaft the proper way when turning the engine with the balancer installed. The cold-rolled steel adapter easily attaches to most balancers and comes in handy when assembling an engine or degreeing a cam. These wrenches require a 3/8 in. or 1/2 in. ratchet or breaker bar to rotate the engine.
( 16 )
$239.97
Proform Harmonic Balancer Puller and Installer Tools
Proform harmonic balancer puller and installer tools are equipped with a roller thrust bearing for easy installation. They may also be used for steering wheel installation and removal. These heavy-duty professional tools have a maximum recommended torque of 150 lbs.-ft. The tools are available in universal and application-specific models.
( 72 )
$102.99
—
$119.99
Allstar Performance Main Cap Removal Tools
Allstar Performance main cap removal tools are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. Their design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, an Allstar main cap removal tool is a must-have.
Not Yet Reviewed
$229.99
Moroso Harmonic Balancer Installation and Removal Tool Adapters
Moroso harmonic balancer installation and removal tool adapters are designed to work with the GM LS and LT Series of engines. These adapters make it possible for you to install and remove GM LS and LT harmonic balancers quickly and easily, without causing damage. These strong steel threaded adapters have a durable black oxide finish for long-lasting service.
Not Yet Reviewed
$100.99
ICT Billet LS Crankshaft Pin Drill Fixture Kits
ICT billet LS crankshaft pin drill fixture kits allow you to effortlessly drill and pin your GM LS Series crankshaft and balancer to prevent slip when using a supercharger. Made from high-grade steel, the bits easily drill into the crank and balancer.
( 11 )
$109.99
Moroso EFI Fuel Rail Mount Tool Trays
Moroso EFI fuel rail-mount tool trays feature integrated holders for spark plugs and ignition wires, convenient carry handle, and room for a variety of tools and supplies while working on your engine. Made from durable, lightweight .100 in. thick aluminum, the trays sit atop fuel rails on EFI manifolds; simply adjust the feet to dial-in fitment of width between fuel rails and height of intake manifold. Moroso EFI fuel rail-mount tool trays are for use with most popular applications, including SBC, BBC, LS, SBF, and BBF.
Not Yet Reviewed
$133.99
COMP Cams Valve Spring Compressor Tools
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 85 )
$124.95
—
$160.95
OTC Camshaft Alignment Tools
Camshaft position is critical in today's engines. OTC offers dozens of camshaft alignment tools designed to help prevent the camshaft from moving. Many of these tools are necessary for performing valvetrain service. Order the model recommended for your engine application.
( 19 )
$142.99
SuspensionMAXX Super T Torsion Bar Tools
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
OTC GM Torsion Bar Unloading Tools
These OTC torsion bar unloading tools are manufactured with a larger C-frame opening to be used on trucks with heavy-duty chassis and larger torsion bars. The OTC GM torsion bar unloading tools hold the torsion bar while you make the adjustments.
( 15 )
$112.99
OTC Ford Rear Main Seal Installers
These OTC rear main seal installers ensure that the rear main seal is set to the correct depth of the crankshaft. The OTC installers fit over the seal and attach to the engine crankshaft with the two bolts included. By alternatively tightening the bolts, the seal is pulled into place quickly, easily, and with no damage to the rear main seal.
( 4 )
$154.99
Yukon Gear & Axle Inner Axle Side Seal Installation Tools
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
SPC Performance Camber Tools
Even out your tire tread wear with these SPC Performance camber tools. They are designed to easily adjust the camber on your vehicle. The tools are application-specific, so you can be sure that they will work on your vehicle. Make fast, easy, accurate camber changes with one of these SPC Performance camber tools.
( 3 )
$159.99
ReadyLift Suspension Torsion Key Unloading Tools
When it comes to safely loading and unloading GM, Ford, and Dodge torsion keys, nothing beats ReadyLift's professional-grade torsion key removal tools. These tools make removing and installing torsion keys safe and easy, allowing for the adjustment or replacement of GM torsion keys in as little as 15 minutes per truck. The forged and hardened steel used in the construction of these tools has been lab-tested for strength and safety and is okay for use with air tools. They can be used with Dodge and Ford trucks. Dodge trucks require an adapter plate, which is included with all Dodge ReadyLift torsion key kits.
( 2 )
$159.95
OTC Injector Rail Assembly Removers
OTC injector rail assembly removers are used for removal of the direct injection fuel rail without damaging the unit. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly. OTC injector rail assembly removers include the remover, stud adapter, and L-hook and are specific to 2007-14 General Motors Direct Injection engines.
Not Yet Reviewed
$191.99
ATI Damper Puller and Installers
ATI damper puller and installers will allow you to remove or install a harmonic balancer the easy way. They feature a CNC-machined puller plate that will accept a variety of bolt patterns and stud sizes. Also included are the puller mandrel, studs, and a plastic storage case to keep everything organized.
( 30 )
$233.22
On Sale
MSD Race Ignition Test Tools
Level the playing field, cut and dried, black and white—no matter how you put it, the MSD Race Ignition Test Tool easily allows tech officials to plug-in to competitors ignition units to verify everyone is playing by the rules. The tester can be programmed by a sanctioning body or race track with their master file by which racers are mandated to comply. Circle Track Officials can choose regulated parameters such as max RPM rev limit, timing curve, and coil type to regulate when using the MSD 6014CT Circle Track LS Ignition Control. Drag Race Tech Officials can plug into the MSD Power Grid, part number 7730, and monitor the ARC Module timeout feature, the safety RPM feature, and the safety timeout feature. It will also display the part numbers and serial numbers of all modules connected to the Grid. A special version of this unit will be available for NHRA Tech Officials to verify compliance of Top Fuel and Funny Car units. Features: * Quickly plug-in to competitors' ignition to test rule compliance * Works only with Circle Track LS Ignition Control P/N 6014CT, Power Grid Controller P/N 7730 and 77303 * Special version available for NHRA Tech Officials only to test Top Fuel and Funny Car units * User-friendly plug-and-play design
Not Yet Reviewed
$222.95
$125.71
Summit Racing™ 2-Piece Engine Dollies
Summit Racing™ 2-piece engine dollies or stands are constructed from heavy-duty, high-quality steel tubing and feature 3 in. casters. They're designed to hold 850 lbs. and come with a black powdercoat finish. The stands are ideal for engine rebuilds, swapping, prep before installation, and more. Models are available for different engine types; select the stand best-suited for your needs.
( 79 )
$103.99
ATI Crankshaft Pin Drill Fixture Kits
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$139.00
—
$149.00
Summit Racing™ Engine Stand Adapters
Summit Racing™ engine stand adapters are a better way to mount your engine block to your stand. Built from billet aluminum, these plates eliminate the adjustable arms and use all of the available bellhousing bolt holes. The result is a more rigid, secure mount that will eliminate most of the sagging that occurs as you add more weight to the engine assembly.
( 4 )
$109.99
Allstar Performance Heavy-Duty Engine Cradles
The right equipment can make your projects simpler and more enjoyable. Allstar Performance heavy-duty engine cradles will store, transport, and allow you to work more conveniently on your engines. Manufactured from 14-gauge, 1 in. square tubing, these cradles are given a black powdercoat finish to ward off rust and corrosion. The cradles include Grade 5 fasteners and a provision for mounting wheels (not included) with 1/2 in. studs. Your project's finished? Simply disassemble and store the cradles to free up floor space in your garage or shop. Allstar cradles are available for specific engine types, including LS, GM, Mopar, Ford, Chrysler, Dodge, Hemi, Jeep, Oldsmobile, and Pontiac. Order the model that best suits your application.
( 125 )
$103.99
—
$144.99
