Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
51 Results Found For "shifter"
Showing In Stock Items. Show All 70 Items.
Ron Francis Wiring Gear Shift Indicator Switches
Ron Francis Wiring gear shift indicator switches are gear shift sending units for use with 12 V LED indicators. Switches include mounting hardware to fit the GM 700R4 automatic transmission and are fully push-button adjustable with no magnets to align! These units feature a built-in neutral safety switch and back-up light circuit. The decoder can be mounted inside the vehicle for easy access. Gear shift indicator plates with lights are sold separately.
Not Yet Reviewed
$176.35
—
$186.15
Manufacturer Rebate
AutoMeter Level 1 Digital Pro Shift Controllers
The new technology in these AutoMeter Level 1 digital Pro Shift controllers makes it possible to do away with traditional plug-in chips, while providing a combination of features only previously available on the larger Shift-Lite and Playback tachometers. These Level 1 controllers feature a single programmable shift point and a digital rpm display and are compatible with 4-12 cylinder engines.
( 3 )
$149.99
On Sale
JET Powr-Shift Computer Chips/Modules
JET Powr-Shift performance chips/modules will improve the performance of your car, truck, or SUV, adding up to 23 hp instantly with simple, plug-and-play installation. These JET Performance chips provide exclusive, full range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno tested to ensure the most possible horsepower and drivability from each application. JET Powr-Shift chips combine features of a Stage 2 performance chip with a more aggressive transmission program. Choose the one compatible with your vehicle.
( 4 )
$227.99
$205.19
On Sale
Hurst Roll Control Button Switches
Hurst Roll Control button switches have the edge with a microswitch and cords. These switches deliver immediate and accurate releases with a capacity of 10 amps. The included wire makes installation hookup a snap.
( 19 )
$142.95
N2MB Racing WOT Boxes
N2MB Racing offers innovative electronics for your performance vehicle—including their WOT boxes. They add launch control and no-lift shifting abilities to any car, truck, motorcycle, or other fuel-injected vehicles, helping cut tenths of seconds off your quarter-mile runs. Gain the upper hand in your race circuit competitions with N2MB Racing WOT boxes!
( 2 )
$219.00
On Sale
Summit Racing™ Turn Signal Switches
Summit Racing™ offers turn signal switches for a wide selection of vehicles, particularly classic cars and trucks from the 1960s, '70s, and '80s. These replacements are made of high-quality plastic to ensure dependable performance and longevity--and include wiring. They're made to OEM tooling specifications and are application-specific. Order the model recommended for your setup.
( 39 )
$106.99
—
$137.99
On Sale
Summit Racing Equipment® Wiring Harnesses
Summit Racing Equipment® offers wiring harnesses for a wide range of vehicles—including many Chevrolet, Pontiac, Oldsmobile, and American Motors models from the 1960s and '70s. The factory-style replacement harnesses are ideal for restoration and upgrade projects. They are available to connect and power up a variety of dashboard and accessory functions. Order the wiring harness recommended for your application.
( 4 )
$169.99
$160.99
On Sale
MSD RPM Activated Switches
From light bulbs, to the high-speed retard function on an MSD timing computer, to air shifters, these MSD rpm activated switches turn on almost anything. They use MSD's plug-in rpm modules to turn on your components at any rpm you select.
( 18 )
$181.95
$163.75
Manufacturer Rebate
AutoMeter Distributorless Ignition Tachometer Adapters
Need to install a tachometer in your late model distributorless vehicle? AutoMeter has the solution. These tach adapters are designed for vehicles with coil pack or coil-over-plug ignition systems where no tachometer output or signal wire is available. They allow most late model distributorless vehicles to have a tachometer and/or shift light installed.
( 29 )
$111.99
MSD 6EFI Ignitions
MSD 6EFI ignitions are capacitive discharge ignitions designed to work in harmony with electronic fuel injection systems. They come with detailed wiring instructions, making installation a breeze. Increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire rpm range are all benefits of adding these ignition controls to your fuel injected engine. They feature built-in rev limiters that will protect the engine in the event of a missed shift or driveline failure. If you have a 4, 6, or 8-cylinder engine with EFI, MSD 6EFI ignition controls will connect and fire it up! MSD 6EFI ignitions feature: * Detailed instructions for installation with various EFI systems * Compact design * Adjustable rev limiter for over-rev protection with rotary dials in 100 rpm increments * Works on 12 V electrical systems using a distributor * Easily connects to magnetic pickup, electronic, and even points distributors
( 11 )
$185.99
Z Automotive Tazer Programmers
Unlock the hidden potential in your Mopar with Z Automotive Tazer programmers. These programmers plug into your OBD II port and allow you to enable features that exist in your vehicle from higher trim levels or packages disabled by the factory. Unlock features that will allow a backup camera, factory fog lights, daytime running lights, line lock functions, Light Show mode, and more. Specific features of Z Automotive Tazer programmers include: * Enable factory sport mode for 5-speed vehicles with 8.4 in. and 4.3 in. Uconnect screens (2012-14 Charger/300) * Enable factory sport mode for 8-speed vehicles (2012-17 Charger/300, 2015-17 Challenger) * Enable SRT performance pages on 8.4 in. Uconnect screen (2012-14 Charger/300) * Enable SRT performance timers in EVIC display (2012-18 Charger/300/Challenger) * Enable drive modes—street/sport/track/valet/custom/ECO (2015-18 Scat Pack Charger/Challenger) * Enable support of added factory paddle shifter (2012-18) * Force RWD mode for AWD cars/trucks (2012-17 Charger, 2014-17 Jeep GC SRT, 2014-17 Durango with electronic transfer case) * Manually shift gears using steering wheel cruise plus/minus buttons (2012-14, 5-speed only)
( 12 )
$249.00
American Autowire Turn Signal Switches
These American Autowire turn signal switches are made of high-quality plastic to ensure performance and dependability. They have a stock terminal type that fits transmission models without column shifters and include wiring. If you're looking to finish your project car and need a new turn signal switch, look no further than American Autowire.
( 181 )
$114.95
—
$121.60
On Sale
MSD Tach Signal GMR Pickups
MSD tach signal GMR pickups simply attach, with no splicing or cutting, to a current-carrying wire, and turn that information into a 12 V rpm signal. That signal can then be used to activate a shift light, rpm activation switch, or tachometer.
( 7 )
$114.95
$103.45
Shiftworks Neutral Safety and Back-up Light Switch Relocation Kits
Shiftworks neutral safety and back-up switch relocation kits are cost-effective ways to upgrade your transmission, without having to buy a new shifter. These kits can eliminate linkage issues related to the OEM switch location on column. Each of these conversion kits come with the necessary components to upgrade your factory shifter to work with your new transmission, while keeping the original shifter appearance of your vehicle. In addition to these neutral safety and back-up light switch kits, Shiftworks also offers shifter assemblies, and other components that are available for purchase to update or repair your shifter.
( 10 )
$139.99
ACDelco Transmission Control Modules
A faulty transmission control module can leave you stranded in a hurry—but ACDelco has a direct replacement for your vehicle application. Each module has been thoroughly tested to offer the same function and performance as the OEM parte. Restore smooth shifting with a new transmission control module from ACDelco.
( 1 )
$181.99
Lingenfelter Performance Engineering STOV-004 Vehicle Speed Based Switches
The Lingenfelter Performance Engineering STOV-004 is a vehicle speed-based switch that can be used to enable or disable devices based on vehicle speed—much like an RPM switch or RPM window switch, but instead based on vehicle speed. The STOV-004 also provides a 0-5 volt analog output corresponding to vehicle speed that can be used to provide a vehicle speed signal to many other add-on devices. These switches can accept the vehicle speed output signal from most engine control modules and can also connect directly to many common speed sensors. The Lingenfelter STOV-004 can also provide a stage/gear shift output for boost controllers and other devices that need to see a gear shift position switch output to change stages. Product features: * Accepts a wide range of pulse count frequencies from 100 to 60,000 pulses per mile (PPM) * Works with ECM output signals and stand-alone Hall effect-type speed sensors * Easy-to-use vehicle speed learning mode using push-button switch in the back of the module * Set the PPM count even when you do not know the PPM configuration of the vehicle * Built-in vehicle speed sensor signal pull-up resistor that is enabled by a DIP switch setting inside the back cover for applications that require a pull-up resistor * Simplifies wiring * Easy to adjust high and low vehicle speed settings via four front-mounted 10-position switches * Provides switched outputs or window switch outputs based on vehicle speed * Provides ECM/PCM vehicle speed frequency to analog voltage conversion Available output types: * Normally ON ground * Normally OFF ground * Normally ON +12vdc * 0-5vdc/0-250 mph linear analog output Stage/gear shift output mode works with multi-stage boost and nitrous controllers including: * Turbosmart eBoost2 * NLR AMS1000 * Leash Electronics Boost Leash Gear-Based controller Benefits: * Easily adjustable activation point in 1 mph increments * Enable nitrous or an additional stage of nitrous-based on vehicle speed * Enable a boost controller for increased boost above a certain vehicle speed * Disable fans above a certain vehicle speed * Lock a torque converter clutch above a certain vehicle speed * Disable a 2-step once the vehicle is moving so that it does not activate on each gear change
( 2 )
$140.55
FAST XR-i Points-to-Electronic Ignition Conversion Kits
Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM
( 24 )
$123.95
—
$149.95
Shifnoid RPM-Activated Switches
Shifnoid rpm-activated switches can be used to activate CO2 or electric shifters, nitrous oxide solenoids, shift lights, timing computers, or any other device that needs to be activated at a preset rpm. They accept plug-in modules, so you can set your specific rpm. The Shifnoid rpm-activated switches are 12 and 16 V compatible and have been designed to work on V8 engines.
( 4 )
$148.99
ACCEL SuperBox CD Ignition Systems
ACCEL SuperBox CD ignition systems provide the perfect blend of value and performance for your street or strip vehicle. Built around durable cast aluminum housings, they can be set for 4, 6, or 8-cylinder applications while easily connecting to points, amplifiers, and magnetic pickup distributors. An adjustable rev limiter on these modern capacitive-discharge ignitions protects the engine in the event of driveline failure or the occasional missed shift. They are also fully adjustable with rotary dials in 100 rpm increments. Additional details: * Multiple sparks last through 20 degrees of crankshaft rotation for improved starting, smoother idle, and throttle response * At low rpm, they fire a series of sparks that ensure better combustion of the air/fuel mixture * Full power output at high rpm * Accessory harness available for plug-and-play on most applications
( 5 )
$204.99
Clearance
Mele Design 1200 Series Rally Spec Battery Mounts
Built for performance, the 1200 Series Rally Spec battery mounts by Mele are designed to properly secure and protect your Rally Spec battery. Securing these vital components is important in both race and performance cars enduring high G-loads. Featuring a 5052 marine-grade, locally sourced aluminum construction, the mounts have been hand-formed, hand finished, and TIG-welded. The proprietary coated steel mounting plate makes it easy to mount to any flat surface. Some drilling may be required for mounting the base plate; welding is optional. Other features and benefits: * Lightweight design * Secures battery mount to Rally plate using multiple controlled points * Able to place mount anywhere there is a flat metal surface using the comprehensive coated steel rally plate—including the trunk! * Shed and/or shift vital weight in the vehicle * Track tested—these mounts are currently being used by numerous teams in the American Rally Association * Drilling is required; welding is optional * Designed to fit the Odyssey PC1200, Full Throttle FT560, and XS Power D1200 battery
Not Yet Reviewed
$250.00
$179.50
Clearance
MeLe Design H5/Group 35 Rally Spec Battery Mounts
MeLe Design H5/Group 35 Rally Spec battery mounts are CNC cut in-house from 5052 marine-grade aluminum, then hand-formed, hand-finished, and TIG-welded. Each mount comes with a proprietary integrated mount plate. Hardware is included, and the mounts are finished in a black textured powdercoat. Additional notes: * Drilling is required * Welding is optional * Designed to fit the Full Throttle FT 750-35, Odyssey ODP-AGM35 (PC1400), Antigravity H5/Group 47, Antigravity Group 35/Q85, and the Antigravity Group 75/78 batteries * Able to place mount anywhere there is a flat metal surface using our integrated mount plate (including the trunk) * Shed and or shift vital weight in the vehicle * Hoonigan approved (this mount is currently being used by Larry Chen and Bucky Lasek)
Not Yet Reviewed
$250.00
$179.50
Crown Automotive Neutral and Backup Safety Switches
Fix your light issues with Crown Automotive neutral and backup safety switches, direct replacements for your original equipment at a reasonable price. Neutral safety switches prevent the vehicle from starting when in any other gear besides "Neutral" and "Park"—and they double as a backup light switch. Backup switches can make other drivers aware of your intentions when you shift into reverse. These small replacement units help to prevent accidents which may occur if your old switches become loose or have degraded over time. Crown safety switches are available in various styles for fitment on numerous makes and models.
( 17 )
$116.99
ATP Automatic Transmission Wiring Harnesses
ATP Automotive provides one of the widest product offerings of automatic gear-shifting control products, including transmission wiring harnesses, for most import and domestic vehicles. ATP designs and manufactures them to meet or exceed the OEM specifications to properly control your drivetrain. Get exact-fit, no-compromise replacement parts when you order the ATP automatic transmission wiring harnesses designed for your application.
( 1 )
$123.99
—
$160.99
Standard Motor Vehicle Speed Sensors
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 17 )
$101.99
—
$246.99
