Availability
On Sale
MSD Pro Mag tach converters will convert the magneto's signal into a 12 V square wave signal that your tachometer can understand. They are less than 3 in. long and feature epoxy-encased circuits to resist water and vibration.
( 7 )
$172.95
$155.65
If the taillight wiring harness on your classic convertible or coupe has become brittle or is starting to dip in functionality, simply replace it with one of CA's taillight harnesses. These OEM-style wiring harnesses come with the correct wire connectors—and all wires are color-coded to match the factory wires, contributing to an easy installation. For direct-fit replacement parts for your vintage muscle car, the right choice is CA!
Not Yet Reviewed
$119.99
Scott Drake taillight wiring harnesses supply power to the back half of mid-1960s Mustangs. These replacement harnesses follow the same route as the original and include outer weave coverings. They plug into the main harness under the dash for clean, non-cluttered looks. Whether you're re-wiring your vehicle or completing a ground-up restoration, Scott Drake has the electrical components you'll need.
( 1 )
$176.95
Scott Drake windshield wiper switches are available for an assortment of vintage muscle cars, some engineered to factory specifications and able to be plugged right into the original wiring. They're available in a variety of styles, with or without wiring. Order the replacement model recommended for your vehicle.
( 16 )
$107.95
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$139.65
—
$242.25
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 52 )
$258.99
$159.99
—
$243.99
American Autowire power window and lock harnesses are ideal for replacement or upgrade applications. These harness kits enable you to wire up and restore power to two key accessories on your automobile doors. Order the model recommended for your vehicle.
Not Yet Reviewed
$150.10
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 13 )
$167.99
Summit Racing™ billet electronic Mopar distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Summit Racing™ kits are made entirely from new, not rebuilt components. Kits include: * OE style magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit (Blue Box), wiring harness, and ballast resistor * Black female socket-type distributor cap
( 42 )
$230.99
—
$239.99
Proform Mopar Licensed electronic distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Proform kits are made entirely from new, not rebuilt components. Order the model designed for your vehicle make and engine application. Kits include: * Prominently displayed retro-style Mopar logo * Magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit box, wiring harness, and ballast resistor * Black female socket-type distributor cap * Detailed installation instructions
( 43 )
$180.95
Summit Racing™ billet electronic Mopar distributors convert your old points ignition to a new modern electronic breaker-less system. These distributors offer these benefits: improved timing and dwell control; higher energy at the spark plug for easier starting; improved throttle response; extended RPM range; and better efficiency, along with increased spark plug life. The distributor bodies are CNC-machined from forged 6061-T6 aircraft-grade aluminum and come with a glass fiber reinforced (PBT) tan cap (which is patterned after the OEM dual point cap)—with extra internal voltage dams that help to prevent crossfire while resisting carbon tracking. The shafts are centerless ground and ride on both upper and lower sealed roller bearings for smooth operation at high RPM's and extended service life. The cap contacts and rotor blade are brass and the rotor spring is stainless steel, all for long-term maximum conductivity.
( 18 )
$194.99
Convert your dated ignition system to modern HEI technology with CA Corvette HEI tach drive distributors. With this simple distributor swap, you can get all the benefits of HEI technology, plus performance enhancements. Compared to what your vehicle originally came with, this HEI tach drive distributor will give you the firepower you need for your Corvette's ignition.
Not Yet Reviewed
$119.99
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$100.50
—
$249.99
On Sale
MSD distributorless ignition tachometer adapters allow you to install an aftermarket tachometer on vehicles with no distributor and multiple coil packs. These compact tach drivers measure only 1.5"x 3.5"x 2" and are potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils' 12 volt supply wire where it senses the current going through the wire and converts this information into a 12 volt output signal that most aftermarket tachometers use as a trigger signal. MSD distributorless ignition tachometer adapters can be used on 4, 6 or 8-cylinder engines.
( 7 )
$172.95
$155.65
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
Summit Racing™ Mopar electronic distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Summit Racing™ kits are made entirely from new, not rebuilt components. Kits include: * OE style magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit (Blue Box) re-engineered to 5,900 RPM, wiring harness, and ballast resistor * Black female socket-type distributor cap
( 1 )
$190.99
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$189.95
—
$224.95
FAST XR3000 ignitions convert your points to an electronic ignition. They feature an all-new status LED light for easy diagnostics and 150 percent greater spark gap energy over stock points ignitions. They use a high-output coil without a ballast resistor, an optical trigger for precise ignition timing accuracy, and are fully sealed for protection against dirt, moisture, and vibration.
( 1 )
$155.95
—
$187.95
On Sale
Collect the data you need with these Edge universal sensor input harnesses. These harnesses are designed to read any 0-5 V signal and convert it into useful data that can be displayed on your Edge CS or CTS. Using one of these Edge universal sensor input harnesses will allow you display a variety of custom gauges and values on your CS or CTS programmer, making it an even more versatile tool for your vehicle.
Not Yet Reviewed
$240.95
$216.85
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$368.95
$126.95
—
$229.95
On Sale
Scott Drake offers Street/Strip HEI distributors for a wide range of applications, including many Ford and Mercury cars, trucks, and vans from the 1960s, '70s, and '80s. These units are designed for the enthusiast looking to replace outdated points or a stock distributor with a dependable high-energy ignition distributor. Converting to an HEI system makes installation and set-up easy. Just drop it in and connect two wires—it's that simple! This high performance distributor features a 50,000 V coil that delivers 2x the energy across the spark gap compared to a stock HEI distributor. It will fit all 1964-84 Ford 302 motors (will not fit 1985 and later 5.0L/302 roller engines, and will not clear stock air cleaners).
Not Yet Reviewed
$149.95
$134.95
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$208.99
$101.99
—
$248.99
The Lingenfelter Performance Engineering STOV-004 is a vehicle speed-based switch that can be used to enable or disable devices based on vehicle speed—much like an RPM switch or RPM window switch, but instead based on vehicle speed. The STOV-004 also provides a 0-5 volt analog output corresponding to vehicle speed that can be used to provide a vehicle speed signal to many other add-on devices. These switches can accept the vehicle speed output signal from most engine control modules and can also connect directly to many common speed sensors. The Lingenfelter STOV-004 can also provide a stage/gear shift output for boost controllers and other devices that need to see a gear shift position switch output to change stages. Product features: * Accepts a wide range of pulse count frequencies from 100 to 60,000 pulses per mile (PPM) * Works with ECM output signals and stand-alone Hall effect-type speed sensors * Easy-to-use vehicle speed learning mode using push-button switch in the back of the module * Set the PPM count even when you do not know the PPM configuration of the vehicle * Built-in vehicle speed sensor signal pull-up resistor that is enabled by a DIP switch setting inside the back cover for applications that require a pull-up resistor * Simplifies wiring * Easy to adjust high and low vehicle speed settings via four front-mounted 10-position switches * Provides switched outputs or window switch outputs based on vehicle speed * Provides ECM/PCM vehicle speed frequency to analog voltage conversion Available output types: * Normally ON ground * Normally OFF ground * Normally ON +12vdc * 0-5vdc/0-250 mph linear analog output Stage/gear shift output mode works with multi-stage boost and nitrous controllers including: * Turbosmart eBoost2 * NLR AMS1000 * Leash Electronics Boost Leash Gear-Based controller Benefits: * Easily adjustable activation point in 1 mph increments * Enable nitrous or an additional stage of nitrous-based on vehicle speed * Enable a boost controller for increased boost above a certain vehicle speed * Disable fans above a certain vehicle speed * Lock a torque converter clutch above a certain vehicle speed * Disable a 2-step once the vehicle is moving so that it does not activate on each gear change
( 2 )
$140.55
Rostra vehicle speed sensors are speed signal generators that will help you convert to the signal type that you need. The GM sensors include a wiring harness, a GM cable adapter, and a sensor adapter. The universal sensors include a wiring harness and a magnetic pickup to provide a usable speed sense signal.
( 35 )
$102.99
—
$163.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
