Availability
Showing In Stock Items. Show All 194 Items.
Holley drive-by-wire accelerator pedals perfect complements to any vehicle using DBW. They offer plug-and-play compatibility with Holley EFI and simply bolt into the stock locations when used with Holley's DBW pedal brackets (sold separately). Features: * Simplifies engine swaps with DBW accelerator systems * Works great with Holley EFI installation * Provides modern look and performance for classic vehicles * Fits in OE location when used with Holley DBW pedal brackets
( 1 )
$152.95
A faulty car horn can actually be a safety hazard, leaving you unable to convey an audio signal to other drivers, pedestrians, or animals. These OE-style horn assemblies from OER are reproductions of your original honker, crafted to exact factory specs to install and perform just like new. Each replacement horn set includes mounting brackets—and emits a clear, crisp warning sound.
( 66 )
$154.99
—
$192.99
Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.
( 5 )
$142.95
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
These MSD replacement APS starter pinion gear assemblies are designed to keep your starter engaging properly. They are manufactured from quality materials and install easily with no modifications.
( 11 )
$188.95
Standard Motor offers replacement distributor assemblies for a variety of vehicles. They feature improved gear design for enhanced performance in high-torque applications. Their high-dielectric strength cap ensures accurate energy transfer and spark timing. These are 100 percent new, not remanufactured, to guarantee premium performance. SAE J1171 Marine certified. Order the model recommended for your vehicle.
Not Yet Reviewed
$131.99
—
$142.99
An unresponsive accelerator pedal along with a check engine light is bad news and leaves your Jeep undrivable. Crown Automotive accelerator pedal assemblies include the pedal position sensor, so you can get back on the road safely. They are direct replacements offering the proper fit and performance, matching that of the originals. Hit the gas with Crown accelerator pedal assemblies.
Not Yet Reviewed
$120.99
If it's time to rebuild your starter, then get one of these Tilton replacement starter drive assemblies to get the job done. They include a new pinion gear, sprag assembly, bearing set, cap, and clip. Available for different series of starters, the Tilton replacement starter drive assemblies will keep your starter operating consistently.
Not Yet Reviewed
$221.00
All Balls Racing starter clutch assemblies help maintain and/or repair your motorcycle's electrical system. These high-quality starter drives provide the clutch and bearing set needed to fix common failures of OEM starters. All Balls Racing starter clutch assemblies are available in multiple styles to fit a variety of Harley-Davidson® models from the 1990s and up.
Not Yet Reviewed
$109.54
—
$137.71
B&M remote mushroom cap button and cord assemblies are ideal for racers who wear heavy gloves and cannot feel the light microswitch, or those who race with multi-hit delay boxes. They contain a lightweight spiral cord and self-cleaning terminals, and have a bounce-free operation. They are also ideal for Full and Pro Tree applications.
( 6 )
$134.95
Driving without air conditioning or the heater can make for an uncomfortable trip. Scott Drake has just the parts to get you back in the comfort zone, including these heater switch assemblies. Among the various OEM-style electrical switches are direct fit replacements for early model Ford Mustangs equipped with a factory in-dash A/C unit. Scott Drake offers a huge selection of classic parts to help restore your vintage ride!
Not Yet Reviewed
$101.95
Warn remote control socket assemblies provide a solution to easily connect your winch remote to your Warn winch in a different location with minimal aesthetic changes to the external socket mounting location. These winch accessories allow for seamless integration of the wired remote and provide a clean, functional external mounting point for your corded winch remote, offering advantages like convenience for operating a winch from a different vehicle location. They also offer an aesthetically pleasing look and hidden mounting for specific winch installations, like hidden Zeon winches. These remote socket assemblies have durability through their protective design, and a waterproof connection for reliable performance in various conditions. Key features: * Made from high-quality materials, these assemblies are built to last and withstand harsh operating environments * Waterproof connector protects the connection from the elements and ensures long-term performance * Easily connects a wired remote to the winch, allowing for operation from various positions around the vehicle * Easy installation—can be fitted through a small, drilled hole in the vehicle's grille or other suitable areas, minimizing modifications * Ensures the full range of the corded remote's capabilities is maintained for full remote functionality * Aesthetically pleasing once attached to the exterior of the vehicle—allows for seamless integration of the wired remote, ensuring your Warn winch remains functional even when the winch control pack is relocated * Ideal for hidden Warn Zeon winch installations * Compatible with all Warn winches and wiring harnesses that use the appropriate three-wire system (sold separately)
Not Yet Reviewed
$105.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1982 )
$114.95
—
$236.95
Granatelli spark plug wires utilize an exclusive solid stainless connector cable with stainless snap-lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near 0 ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures of up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. The assembled wires are engineered to exceed OEM specifications and to be OBD-II computer safe. Order the set designed for your vehicle application.
( 56 )
$101.75
—
$246.13
Dragon Fire Street Series spark plug wire sets are specially designed to deliver higher performance over your factory OEM wires, while still maintaining the ability to be used as direct factory replacements. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your vehicle with a specialized set of Dragon Fire 1000 Street Series spark plug wires. Features and specs: * OEM-style terminals * Full EMI/RFI suppression technology * 500 ohm resistance * 500 degrees F high-temperature silicon * OEM-style silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * OEM-style stainless steel conductors * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 40 )
$116.95
—
$129.95
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$100.75
—
$201.05
Dragon Fire Sport Series spark plug wire sets are designed to provide unsurpassed performance, making them one of the best wires available. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your performance project with a specialized set of Dragon Fire 2000 Sport Series spark plug wires. Features and specs: * High-grade copper/stainless steel terminals * Full EMI/RFI suppression technology * 150 ohm low resistance * 600 degrees F-rated silicon * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * Spiral core alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 21 )
$119.95
—
$142.95
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 156 )
$103.99
—
$122.99
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 141 )
$103.99
—
$199.99
Holley spark plug wires will energize your project! They offer a variety of styles and configurations for countless vehicles from the 1990s and up. The wires are available assembled or cut-to-fit. Whether you're looking for high-temperature protection, race, street, motorcycle, or stock replacement, Holley has the right spark plug wires to match your needs—and supply the juice you desire. Order the set recommended for your application.
( 14 )
$152.95
—
$204.95
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$119.99
—
$218.99
Standard Motor Products has the battery cables that you need to keep your ride going. These high-quality cables are direct replacements for the OE cables, ensuring proper fit and performance.
( 66 )
$108.99
Moroso new Ultra 40 Race ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Features of these 8.65mm wires include a Kevlar® core that's four times stronger than Aramid cores, a class-leading 40 ohms of resistance per foot, nickel copper alloy conductors for superior spark energy transfer, an extra-thick EPDM layer for greater dielectric strength, high-temperature silicone boots that can withstand heat up to 600 degrees, and locking stainless steel plug terminals. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection, and their extra-thick diameter extends wire life by adding additional insulation against heat, chaffing, and contaminants.
( 134 )
$173.99
—
$217.99
Now you can put a set of wires on your Mopar from the people who put them on it when it went down the assembly line! Mopar replacement ignition wire sets are as close to the original ignition wire sets as possible. Just like the OE, each carbon suppression wire is created in the dimensions with the correct spark plug boot. Keep your vehicle looking and performing its best with Mopar's full line of genuine Mopar parts.
( 4 )
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
