Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
418 Results Found For "Systems"
Showing In Stock Items. Show All 588 Items.
Summit Racing™ Ignition Kits
Revitalize your small block Chevy's ignition with our Summit Racing™ ignition kits. These packages includes a Summit blueprinted HEI distributor with a powerful 50,000V coil, a high-output 5.7 amp module for precise timing, and a hardened iron drive gear suitable for use with a flat tappet camshaft. Plus, a set of custom-fit Summit 8mm ignition wires, which have a spiral-wound 270 ohm/ft. conductor around an aramid fiber core, blue silicone outer jackets, and stainless steel and brass terminals.
( 18 )
$180.98
Painless Performance Dual Battery Current Control Systems
Painless Performance offers an easy way to control your dual battery current. Their dual battery current control systems include a three position switch to control the second battery through the operation of the solenoid. Switch position one isolates the second battery. Position two connects the battery while the ignition is on. Position three connects the second battery at all times.
( 9 )
$151.99
—
$164.99
Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management System Harnesses
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$119.95
—
$149.95
Summit Racing™ Volt Max X-TREME Spark Plug Wire/Cap and Rotor Kits
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$100.98
—
$117.98
Digital Guard Dawg Hands-Free Security Modules
Digital Guard Dawg hands-free security modules are proven protection for your vehicle! This is the first RFID "hands-free" security system designed for any ATV, UTV, motorcycle, or any other 12 V vehicle. Using technology similar to RFID security systems found on many new luxury automobiles, the M-1 automatically arms and disarms your security system without ever lifting a finger. You simply carry a small RFID device called a "Dawg Tag" with you—and your security functions are all handled automatically whenever you walk away from or return to your vehicle. The Dawg Tag only allows your vehicle to be started when you are next to it. Dawg Tags are dual-mode (manual/automatic) and motion activated with over 6 billion codes. One tag can operate multiple motorcycles—and M-1's silent protection won't drain your battery like common alarms. Installation is quick with the M-1 module's simple 2-wire plus +/- harness.
( 12 )
$142.79
Davies Craig Electric Water Pump and Fan Controllers
Davies Craig electric water pump and fan controllers manage the operation of your chosen EWP by varying the speed of your pump in response to coolant temperature, while also managing control of your electric engine fan. These unique LCD controllers are enhanced with many features that help you set target temperatures to improve fuel efficiency, reduce heat soak, and increase power. Specs and features of Davies Craig digital controllers: * Black and white numerical screen * For 12 and 24 V electrical water pumps * Celsius or Fahrenheit display option * Select any set temperature range from 104 degrees F (40 degrees C) to 230 degrees F (110 degrees C) * Automatic fan cut-in temperature--once engine has reached 5.4 degrees F (3 degrees C) above the targeted (set) temperature * Set/targeted temperature memory * Override feature to assist bleeding EWP and fail-safe * Input voltage display * Compatible with billeted-style electric water pumps * Indicators: Temperature, power, EWP, test, fan, high/low temperature, voltage, above set temperature with alarm * Warning alarms: -- Plus 14 degrees F (10 degrees C) set/target temperature -- Under temperature 104 degrees F (40 degrees C) after 5 minutes -- Temperature sensor error -- Over or under voltage -- EWP error
( 4 )
$170.48
—
$220.07
On Sale
Summit Racing™ Ignition Tune-Up Kit Pro Packs
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$163.89
—
$169.89
Davis Unified Ignition Jeep Firepower Ignition Kits
Do you need more firepower? Davis Unified Ignition Jeep Firepower ignition kits have the components that you need to make your Jeep an energy machine! They start with the Screamin' Demon coil--the name says it all. These coils allow you to open up your spark plug gaps a whopping .065 in.! A larger gap means more spark in the combustion chamber, and that equates to a more complete burn of the fuel mixture, increasing horsepower, gas mileage, and keeping your plugs cleaner, too! And, you'll experience no drop in power when you hit the accelerator, like you do with notorious stock coils. To ensure that every ounce of this high-powered energy gets to your plugs, a set of LiveWires is included. The LiveWires are custom-fit, precut, and numbered at each end for the correct cylinder. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures. Some Jeep kits, depending on the application, include brass terminal caps and rotors as well. Give your ride the added power it was built to handle with Performance Distributors Jeep Firepower ignition kits.
( 8 )
$219.00
—
$249.00
Clearance
Digital Guard Dawg Motorcycle Keyless Ignition Modules
Digital Guard Dawg motorcycle keyless ignition modules provide the ultimate in rider convenience and security. Completely eliminating your motorcycle's ignition key switch, and all the hassles associated with using a key, these KIM modules present the perfect solution with advanced RFID technology and supreme keyless accessibility. You simply carry one of the systems digital RFID "Dawg Tags" with you. As you approach your bike, the KIM modules authenticate your unique RFID Dawg Tag and authorize your ignition automatically. You just climb on, flip your kill switch to ON, thumb your start button, and go! When your ride is over, flip your kill switch to OFF, and you just walk away. The modules automatically arm your motorcycle with dual point immobilization, locking out both your ignition and fuel circuits, leaving your ride fully secured.
( 5 )
$269.00
$169.50
On Sale
ACCEL Truck Super Tune-Up Kits
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
$119.95
—
$182.71
Moroso Super HEI Ignition Kits
Upgrade your ignition system with Moroso Super HEI ignition kits! Developed for racing, all ignition components are engineered to improve ignition accuracy, fuel economy, starting and throttle response. The HEI distributor cap and rotor are precision molded from advanced polymers with solid brass contacts to provide high dielectric strength and unsurpassed timing accuracy. Custom-fit Blue Max spiral core wire set is factory terminated in the correct lengths with numbered I.D. tags, corrosion-resistant locking plug terminals and high-temperature silicone boots. The wire loom kit with separators and show-quality chrome brackets routes wires over the valve covers to keep them away from hot exhaust manifolds or headers. Kit includes HEI distributor cap and rotor, a coil cover, a Blue Max high-performance wire set, and super loom kit.
( 4 )
$200.99
Standard Motor Diesel Exhaust Particulate Sensors
An exhaust particulate sensor or PMS (particulate matter sensor) directly monitors the amount of particulate matter, or soot, in the exhaust, detecting excessive PM emissions. Standard Motor diesel exhaust particulate sensors are direct-fit OE replacements, ensuring the proper fit, form, and function for ease of installation. Manufactured from high-quality materials, Standard Motor sensors are able to withstand extreme conditions. Select the sensor designed for your vehicle.
Not Yet Reviewed
$152.99
—
$218.99
Holley EFI Benchtop Harnesses
Holley EFI benchtop harnesses are designed for benchtop testing and setup of HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes. They are great for ECU diagnostics that do not require a running engine, firmware updates, or 7 in. dash calibrations. The harness has pre-terminated connectors for the following sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI connectors for a Sniper main harness. Also includes a power switch for quick setup in your workspace. Power and ground flying leads need to be connected to your battery or power supply (not included). Key features: * Terminated connectors for multiple EFI inputs * Included power switch allows for a quick "install" on your test bench * Optimal for ECU diagnostic, firmware updating, and pre-configuring dash layouts * Works with HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes * Has pre-terminated connectors for these sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI main harness connectors
Not Yet Reviewed
$236.95
Edelbrock LS Pro-Flo 4 EFI Harnesses
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$117.95
Edge EAS Wideband Adapter Harnesses
Edge EAS wideband adapter harnesses are designed to be an affordable solution to add a wideband O2 sensor into your Edge monitor (not included). With this input cable accessory, you can view your wideband output from your controller right on your monitor and even data-log with the T2 to view later on Edge Dataviewer software. Monitor your wideband O2 sensor in no time with EAS wideband adapter harnesses from Edge! Additional features include: * EAS wideband adapter harness accessory * Plug-and-play installation * Allows user to easily view Air Fuel Ratio on the Diablo or Edge display monitor (not included) * Compatible with Trinity and Insight devices (sold separately)
Not Yet Reviewed
$178.95
Rick's Motorsport Charging Kits
These Rick's Motorsport charging kits include a custom-designed, high-output stator and a heavy-duty modified regulator. Both units included in these kits are direct plug-in, bolt-on pieces and come with a one-year warranty. Rick's Motorsport charging kits are top-notch, high-quality replacement charging system kits for your powersports application.
Not Yet Reviewed
$199.95
AEM Electronics Unsealed BMS Satellite Installation Kits
AEM Electronics unsealed BMS satellite installation kits are supplied with the PCB connector, terminals, and wiring leads. The mission from AEM Electronics is to make high-quality and intuitive products that are simple to use and provide powerful control for vehicles and motorsports applications.
Not Yet Reviewed
$214.95
Davis Unified Ignition Ford Focus Firepower Ignition Kits
Your Ford Focus may be small, but you can make it mighty with Performance Distributors Firepower ignition kits. These ignition kits feature Screamin' Demon coils that allow you to open up your spark plug gaps a whopping .065 in. to burn your fuel more completely! The longer duration spark keeps your spark plugs cleaner, while brass coil connectors ensure maximum conductivity. To deliver every ounce of high-voltage spark produced, a set of LiveWires is included. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures--up to 1,400 degrees! The LiveWires are custom-fit, precut, and numbered at each end to correspond with the correct cylinder. Set your aim on high performance with the easy-to-install Firepower ignition kits from Performance Distributors.
( 6 )
$189.00
APR Power Control Unit Remote Controls
APR Power Control Unit (PCU) remote controls give you Bluetooth access to change your PCU maps on the fly. While you always have access via your smart phone with APR's mobile apps, these remotes provide a quick and easy way to change programs with the click of a button. Features: * Quickly adjust power levels on your APR PCU * Sleek design, mounts anywhere * Batteries included * Clean and attractive design
Not Yet Reviewed
$111.95
Rick's Motorsport Hot Shot Charging Kits
Rick's Motorsport carry a complete line of parts to keep your bike's battery charging up to spec. Their Hot Shot charging kits offer high-output performance and will include direct plug-in, bolt-in stator and regulator. When you're looking for increased electrical power over the OE versions, Rick's Hot Shot line is an excellent choice. Select the kit designed for your motorcycle.
Not Yet Reviewed
$199.95
Rick's Motorsport Hot Shot Lithium Ion-Compatible Charging Kits
Rick's Motorsport carry a complete line of parts to keep your bike's battery charging up to spec. Their Hot Shot lithium ion-compatible charging kits offer high-output performance with lithium batteries. They include direct plug-in, bolt-in stator and rectifier-regulator. When you're looking for increased electrical power over the OE versions, Rick's Hot Shot line is an excellent choice. Select the kit designed for your motorcycle.
Not Yet Reviewed
$149.95
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1004 )
$100.79
—
$246.10
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$151.70
—
$246.10
PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 209 )
$119.66
—
$201.55
