Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
48 Results Found For "Systems"
Showing In Stock Items. Show All 57 Items.
Holley EFI Benchtop Harnesses
Holley EFI benchtop harnesses are designed for benchtop testing and setup of HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes. They are great for ECU diagnostics that do not require a running engine, firmware updates, or 7 in. dash calibrations. The harness has pre-terminated connectors for the following sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI connectors for a Sniper main harness. Also includes a power switch for quick setup in your workspace. Power and ground flying leads need to be connected to your battery or power supply (not included). Key features: * Terminated connectors for multiple EFI inputs * Included power switch allows for a quick "install" on your test bench * Optimal for ECU diagnostic, firmware updating, and pre-configuring dash layouts * Works with HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes * Has pre-terminated connectors for these sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI main harness connectors
Not Yet Reviewed
$236.95
Racepak Air/Fuel Sensors
Collect exhaust samples accurately with Racepak air/fuel sensors. These A/F sensors come with a 13 in. pigtail cable and are compatible with either gasoline or methanol fueled engines. Gasoline application will display ratios between 9.55:1 and 20:1, while methanol will show from 4.22:1 to 8.7:1. Racepak air/fuel sensors can be used with all V-Net products, and can run on 12 to18 V battery systems.
Not Yet Reviewed
$132.95
—
$173.95
Racepak RPM Sensors
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$214.95
—
$245.95
On Sale
Racepak Analog Pre-Programmed V-Net Modules With Sensors
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$368.95
$172.85
—
$234.95
Racepak Split Collar and Magnet Assemblies
Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.
( 5 )
$142.95
Racepak V-Net Tee Cables
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$101.95
Racepak V-Net Cable Bulkhead Connectors
Racepak V-Net cable bulkhead connectors are used when a V-Net cable must pass through a firewall, body, or motor plate. They provide a male and female connector on each side of the panel.
Not Yet Reviewed
$152.95
Racepak Analog Pre-Programmed V-Net Modules Without Sensors
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$193.95
—
$229.95
Racepak Digital Pre-Programmed V-Net No Sensors Required Modules
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The module converts the signal so it can be transmitted over the V-Net. Unlike most V-Net modules, these digital pre-programmed modules do not require a sensor. They use the pulse from the component they are monitoring as the signal to the module. Racepak digital pre-programmed V-Net no sensors required modules are programmed for a specific use and are ready for plug-and-play installation on a V-Net cable.
Not Yet Reviewed
$204.95
Racepak Emergency Kits
Racepak emergency kits contain essential spare components that any racer who depends on a Racepak system should keep handy. In the heat of battle at the track, it's easy to misplace programming cables, memory cards, serial adapters, and more. These emergency kits put a backup set of the parts racers use most to program their Racepak logger and transfer data to a PC in one convenient zip-lock bag. A spare driveshaft rpm connector is included, as is a USB flash drive containing Racepak DataLink II software and manuals for easy reference.
Not Yet Reviewed
$188.95
Racepak V-Net 5-Pin Cables
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$101.95
—
$127.95
Racepak V300SD Roll Bar Mount Brackets
Mount your vehicle's data logger the easy way, using the V300SD roll bar brackets from Racepak Data Systems. These lightweight, aluminum brackets are designed to clamp firmly around a chassis tube and provide a pre-drilled and tapped platform for mounting your recorder. Dual recorder mounting holes allow these brackets to be installed on either longitudinal or lateral chassis tube—now that's versatility! The anodized black brackets are offered in different tube diameters.
Not Yet Reviewed
$173.95
Computech Weld-In Temperature Sensors
Computech weld-in temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes an 1/8 in. pipe thread weld-in bung. The probe is centered in the tube using a compression fitting screwed into the weld-in bung, both of which are included. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech weld-in temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$109.95
Racepak V-Net Modules
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$108.95
—
$236.95
Racepak Shock Travel Modules
Keep track of the movement of your shocks with one of these Racepak shock travel modules. Designed for use with Racepak shock travel sensors (sold separately), they do not require any programming and can accept inputs from up to four individual shock sensors. When used in conjunction with Racepak's shock travel kits, critical shock and chassis adjustments can now be made with confidence through the use of shock travel data.
Not Yet Reviewed
$204.95
—
$234.95
Racepak V-Net Connector Modules
Racepak V-Net connector modules are used to convert the CAN data stream into a V-Net CAN bus data stream compatible with the Racepak V-Net system. This data is then available for use with the full range of Racepak V-net devices, including on-board displays, real-time telemetry, and data-logging applications. The Racepak V-Net connector modules provide setup capability to accommodate selection of scaling units, data-logging sample rates, and even custom sensor calibration.
( 2 )
$204.95
—
$214.95
Racepak Digital Pre-Programmed V-Net Modules Without Sensors
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules without sensors are programmed digital function modules ready for plug-and-play installation on a V-Net cable. You must add the appropriate sensor to the module.
Not Yet Reviewed
$204.95
Racepak IQ3 Remote Buttons
Racepak IQ3 remote buttons connect to the IQ3 digital dash via the harness—to program and advance through the data logging screens. These accessories are invaluable to your IQ3 system.
Not Yet Reviewed
$112.95
—
$195.95
Computech Clamp-On Temperature Sensors
Computech clamp-on temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes a clamp that expands to 2 1/2 in. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech clamp-on temperature sensors are designed to be used with regular-octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$139.95
Computech Bolt-On Temperature Sensors
Computech bolt-on temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes a 3/8 in. diameter ring connector for a bolt-on installation. The Computech bolt-on temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures.
Not Yet Reviewed
$159.95
—
$169.95
Racepak Contact Closure Driveshaft Sensors
Racepak contact closure driveshaft sensors detect driveshaft or wheel rpm. Designed to work with a variety of Racepak data loggers and dashes, these plastic sensors feature a 5/16 in. fine thread pitch and are triggered using magnets. Monitor your driveshaft's rotation with Racepak contact closure sensors.
( 1 )
$161.95
Racepak Sportsman Driveshaft Wiring Harnesses
Racepak offers a wide range of automotive data acquisition components, including Sportsman driveshaft wiring harnesses. These replacement driveshaft and 12 V event wiring harnesses are designed for the Sportsman data-logger. They're used in many drag racing, land speed, and street applications.
Not Yet Reviewed
$122.95
Racepak OBD II V-Net Interface Cables
Racepak OBD II V-Net interface cables offer an easy, cost-effective way to access information from your Racepak V-Net data-logger and display products. These modules enable you to record, download, and graph data the same as standard external sensors. Installation is as simple as plugging in two connectors! Detection and programming take just minutes, enabling you to record or display data in a short period of time.
Not Yet Reviewed
$101.95
Racepak Interface 7-Pin Cables
Racepak interface 7-pin cables are available in multiple lengths to extend analog and interface module connections on Racepak V300SD, V500SD and G2X Pro data loggers. They are made of high-quality materials to provide long-lasting durability and performance. If you need to extend your analog or interface connections, Racepak interface extension cables can make it happen.
Not Yet Reviewed
$101.95
—
$136.95
