Availability
Showing In Stock Items. Show All 9 Items.
ZZPerformance offers high-voltage coil packs for a wide range of vehicles—including many Chevrolet, Cadillac, Pontiac, Buick, and Oldsmobile models from the early 1990s and up. The coil packs are available in different styles for various applications. Here are further details: * Model HVCP-14T: Upgrade your Volt/ELR ignition coil for improved performance and economy! The GM Voltec platform was designed around it's battery/hybrid system, but the internal combustion system was a budget solution—and the factory coil does not maximize the performance and efficiency of your engine. ZZP's high-voltage coil pack has improved core material, tighter coil winding, and higher voltage. No ECU calibration needed. * Model HVCP-38V2: These high-voltage coil packs will supply a stronger spark, which allows you to run a larger gap that will improve fuel economy, drivability, and HP capability. Not an earth-shattering difference but a small gain. Definitely well worth the upgrade if you're replacing your coils. --- Torque spec: 25 inch pounds --- No returns on electrical items. --- Sold in a set of 3. --- These fit GM 3800 W-Body and H-Body cars, including L67, L36, L32, and L26 * Model HVCPLSSQ8: After the resounding success of ZZP's round-style LSx ignition coils, ZZP now offers this square style. These coils produce on average 15 percent more spark—and have dyno-tested "before and after" results netting 4 to 5 whp gains on a naturally aspirated LS vehicle. Turbocharged and supercharged vehicles have netted 10+ whp gains and 15+ percent more spark than stock. Very impressive numbers for coils, better than OEM! This set of 8 coils will fit in place of the stock coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy ignition. The increased spark energy and voltage help improve the combustion process of the fuel mixture to create a more efficient burn. This results in improved throttle response, smooth idle, and quick starts, plus increased high-RPM performance! The coil packs also work fine for totally factory/stock vehicles. Fits 4.8, 5.3, 6.0, 6.2 and 7.0L. (Note: There are many variations of LS coils even within the same make and model year, so please check your vehicle to see if you have the square style. These replacements will not fit vehicles with the round style coil. The connectors and the way they mount are different, so you have to verify they look like the ones pictured.)
( 7 )
$109.99
—
$199.99
On Sale
Professional Products Chrysler Powerfire ignition coil packs are designed to give your ignition system a shot in the arm. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution.
( 32 )
$189.99
$170.99
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$130.20
—
$247.80
The Lingenfelter Performance Engineering STOV-004 is a vehicle speed-based switch that can be used to enable or disable devices based on vehicle speed—much like an RPM switch or RPM window switch, but instead based on vehicle speed. The STOV-004 also provides a 0-5 volt analog output corresponding to vehicle speed that can be used to provide a vehicle speed signal to many other add-on devices. These switches can accept the vehicle speed output signal from most engine control modules and can also connect directly to many common speed sensors. The Lingenfelter STOV-004 can also provide a stage/gear shift output for boost controllers and other devices that need to see a gear shift position switch output to change stages. Product features: * Accepts a wide range of pulse count frequencies from 100 to 60,000 pulses per mile (PPM) * Works with ECM output signals and stand-alone Hall effect-type speed sensors * Easy-to-use vehicle speed learning mode using push-button switch in the back of the module * Set the PPM count even when you do not know the PPM configuration of the vehicle * Built-in vehicle speed sensor signal pull-up resistor that is enabled by a DIP switch setting inside the back cover for applications that require a pull-up resistor * Simplifies wiring * Easy to adjust high and low vehicle speed settings via four front-mounted 10-position switches * Provides switched outputs or window switch outputs based on vehicle speed * Provides ECM/PCM vehicle speed frequency to analog voltage conversion Available output types: * Normally ON ground * Normally OFF ground * Normally ON +12vdc * 0-5vdc/0-250 mph linear analog output Stage/gear shift output mode works with multi-stage boost and nitrous controllers including: * Turbosmart eBoost2 * NLR AMS1000 * Leash Electronics Boost Leash Gear-Based controller Benefits: * Easily adjustable activation point in 1 mph increments * Enable nitrous or an additional stage of nitrous-based on vehicle speed * Enable a boost controller for increased boost above a certain vehicle speed * Disable fans above a certain vehicle speed * Lock a torque converter clutch above a certain vehicle speed * Disable a 2-step once the vehicle is moving so that it does not activate on each gear change
( 2 )
$140.55
On Sale
Put some more juice into your ignition system with these Professional Products Ford Powerfire ignition coil packs. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution. The coil packs are available for 2-valve, 3-valve, and 4-valve Ford engines.
( 21 )
$116.99
—
$252.99
$105.29
—
$227.69
Are your coil packs underachievers? Replace your factory coils with Granatelli Hot Street coil packs and get more power to your spark plugs. Their performance coil packs provide the perfect voltage to prompt your plugs to fire--every time--for reliable starts and uninterrupted operation. These epoxy-filled coiled housings are OBD-II safe and offer increased horsepower, torque, and fuel economy for your engine with minor power-adders. Achieve a new level of ignition performance with Hot Street coil packs from Granatelli.
( 38 )
$191.67
—
$217.85
Standard Motor offers replacement distributor assemblies for a variety of vehicles. They feature improved gear design for enhanced performance in high-torque applications. Their high-dielectric strength cap ensures accurate energy transfer and spark timing. These are 100 percent new, not remanufactured, to guarantee premium performance. SAE J1171 Marine certified. Order the model recommended for your vehicle.
Not Yet Reviewed
$145.99
—
$157.99
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 166 )
$239.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
