Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
94 Results Found For "Systems"
Showing In Stock Items. Show All 115 Items.
Summit Racing™ Ignition Kits
Revitalize your small block Chevy's ignition with our Summit Racing™ ignition kits. These packages includes a Summit blueprinted HEI distributor with a powerful 50,000V coil, a high-output 5.7 amp module for precise timing, and a hardened iron drive gear suitable for use with a flat tappet camshaft. Plus, a set of custom-fit Summit 8mm ignition wires, which have a spiral-wound 270 ohm/ft. conductor around an aramid fiber core, blue silicone outer jackets, and stainless steel and brass terminals.
( 18 )
$180.98
Summit Racing™ Volt Max X-TREME Spark Plug Wire/Cap and Rotor Kits
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$100.98
—
$117.98
On Sale
Summit Racing™ Ignition Tune-Up Kit Pro Packs
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$163.89
—
$169.89
Davis Unified Ignition Jeep Firepower Ignition Kits
Do you need more firepower? Davis Unified Ignition Jeep Firepower ignition kits have the components that you need to make your Jeep an energy machine! They start with the Screamin' Demon coil--the name says it all. These coils allow you to open up your spark plug gaps a whopping .065 in.! A larger gap means more spark in the combustion chamber, and that equates to a more complete burn of the fuel mixture, increasing horsepower, gas mileage, and keeping your plugs cleaner, too! And, you'll experience no drop in power when you hit the accelerator, like you do with notorious stock coils. To ensure that every ounce of this high-powered energy gets to your plugs, a set of LiveWires is included. The LiveWires are custom-fit, precut, and numbered at each end for the correct cylinder. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures. Some Jeep kits, depending on the application, include brass terminal caps and rotors as well. Give your ride the added power it was built to handle with Performance Distributors Jeep Firepower ignition kits.
( 8 )
$219.00
—
$249.00
On Sale
ACCEL Truck Super Tune-Up Kits
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
$119.95
—
$182.71
Moroso Super HEI Ignition Kits
Upgrade your ignition system with Moroso Super HEI ignition kits! Developed for racing, all ignition components are engineered to improve ignition accuracy, fuel economy, starting and throttle response. The HEI distributor cap and rotor are precision molded from advanced polymers with solid brass contacts to provide high dielectric strength and unsurpassed timing accuracy. Custom-fit Blue Max spiral core wire set is factory terminated in the correct lengths with numbered I.D. tags, corrosion-resistant locking plug terminals and high-temperature silicone boots. The wire loom kit with separators and show-quality chrome brackets routes wires over the valve covers to keep them away from hot exhaust manifolds or headers. Kit includes HEI distributor cap and rotor, a coil cover, a Blue Max high-performance wire set, and super loom kit.
( 4 )
$200.99
Edelbrock LS Pro-Flo 4 EFI Harnesses
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$117.95
Davis Unified Ignition Ford Focus Firepower Ignition Kits
Your Ford Focus may be small, but you can make it mighty with Performance Distributors Firepower ignition kits. These ignition kits feature Screamin' Demon coils that allow you to open up your spark plug gaps a whopping .065 in. to burn your fuel more completely! The longer duration spark keeps your spark plugs cleaner, while brass coil connectors ensure maximum conductivity. To deliver every ounce of high-voltage spark produced, a set of LiveWires is included. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures--up to 1,400 degrees! The LiveWires are custom-fit, precut, and numbered at each end to correspond with the correct cylinder. Set your aim on high performance with the easy-to-install Firepower ignition kits from Performance Distributors.
( 6 )
$189.00
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1004 )
$100.79
—
$246.10
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$151.70
—
$246.10
PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 209 )
$119.66
—
$201.55
PerTronix Ignitor III® Solid-State Ignition Systems
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$153.58
—
$246.10
PerTronix Ignitor II® Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$140.52
—
$239.25
American Autowire Breakerless Se Ignition Systems
American Autowire Breakerless Se ignition systems are made with the highest quality materials to ensure long-lasting durability and performance. They are designed to operate with early model GM vehicles. If it's time to update or upgrade your ignition system, American Autowire Breakerless Se ignition systems are the way to go.
( 21 )
$213.75
ACCEL SuperBox CD Ignition Systems
ACCEL SuperBox CD ignition systems provide the perfect blend of value and performance for your street or strip vehicle. Built around durable cast aluminum housings, they can be set for 4, 6, or 8-cylinder applications while easily connecting to points, amplifiers, and magnetic pickup distributors. An adjustable rev limiter on these modern capacitive-discharge ignitions protects the engine in the event of driveline failure or the occasional missed shift. They are also fully adjustable with rotary dials in 100 rpm increments. Additional details: * Multiple sparks last through 20 degrees of crankshaft rotation for improved starting, smoother idle, and throttle response * At low rpm, they fire a series of sparks that ensure better combustion of the air/fuel mixture * Full power output at high rpm * Accessory harness available for plug-and-play on most applications
( 5 )
$202.99
Racepak Hall Effect Driveshaft Sensors
Racepak Hall Effect driveshaft sensors take advantage of the magnetic field created by simple magnets. It allows the sensors to generate a measurable voltage output known as the Hall Effect. This output can be gauged to accurately determine things like driveshaft or wheel rpm. These metal devices feature a 5/16 in. fine thread pitch on one end and a 3-pin Molex connector on the other for installation. Racepak Hall Effect driveshaft sensors work with several models of Racepak data loggers and dashes.
Not Yet Reviewed
$224.95
MSD Magnetic Pickup Tach Adapters
MSD magnetic pickup tach adapters maintain accurate tachometer readings. If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need one of these tach adapters. These units will correct the operation of most voltage-triggered tachometers that do not work directly off of the tach output terminal of your MSD unit.
( 71 )
$108.95
AutoMeter Distributorless Ignition Tachometer Adapters
Need to install a tachometer in your late model distributorless vehicle? AutoMeter has the solution. These tach adapters are designed for vehicles with coil pack or coil-over-plug ignition systems where no tachometer output or signal wire is available. They allow most late model distributorless vehicles to have a tachometer and/or shift light installed.
( 28 )
$111.99
Holley Universal Ignition Harnesses
If your vehicle's main wiring harness doesn't have COP (coil-on-plug) trigger wires, you can simply upgrade to one of Holley's universal ignition harnesses. They're specially designed to install coil-on-plug or coil-near-plug coils on Holley EFI systems into Holley Smart Coil ignition sub-harnesses or GM LSx coil harnesses. These harnesses are ideal for use with Holley HP or Dominator ECUs, but are compatible with other EFI systems, as well. Extra pins are provided for both the metripak and ECU ends, if you decide to shorten the harnesses. Caution should be taken to ensure coil trigger wires are installed in their correct pin locations to prevent engine misfire. Make certain your EFI system fires right every time with Holley universal ignition harnesses.
Not Yet Reviewed
$191.95
MSD Non-Current Limited Ignition Tachometer Adapters
If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a non-current limiting ignition (originally equipped with a ballast resistor) you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.
( 17 )
$101.95
ACCEL Points Eliminator Replacement Modules
If your points eliminator module happens to burn out, or you're performing maintenance to your system, be sure to have the right parts for the job--ACCEL points eliminator replacement models. These modules are direct replacements for those in your ACCEL points eliminator kit.
( 15 )
$101.95
MSD Current Limited Ignition Tachometer Adapters
If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a current-limiting ignition (non-ballast resistor systems), you will need one of these MSD limited ignition tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.
( 4 )
$106.95
MSD Distributorless Ignition Tachometer Adapters
MSD distributorless ignition tachometer adapters allow you to install an aftermarket tachometer on vehicles with no distributor and multiple coil packs. These compact tach drivers measure only 1.5"x 3.5"x 2" and are potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils' 12 volt supply wire where it senses the current going through the wire and converts this information into a 12 volt output signal that most aftermarket tachometers use as a trigger signal. MSD distributorless ignition tachometer adapters can be used on 4, 6 or 8-cylinder engines.
( 7 )
$176.95
Holley Hemi V8 Ignition Coil Adapter Harnesses
Holley Hemi V8 ignition coil adapter harnesses let you take charge of your engine by controlling both fuel and spark. They are built to fit and function with the factory harness. The harnesses feature TXL-grade copper wiring with minimal weight, plus high-temperature sleeves in a small diameter. Factory-style terminations provide a strong, secure connection.
( 1 )
$191.95
—
$204.95
