Availability
Manufacturer Rebate
These magneto signal converters allow you to use any AutoMeter standard ignition tachometer, shift light, or rpm-activated module on most Supermag and Vertex magneto applications with external coils.
( 2 )
$102.99
Better performance requires better communication. Classic Instruments speed signal interface modules will efficiently convert pulse signals to make sure your instruments and your transmission clearly understand each other. As a speedometer interface: Input source options: * Built-in Vehicle Speed Sensor (VSS) input source * Three-wire pulse signal generator input source * Two-wire pulse signal generator input source * One-wire ECM signals input source Output: * 8,000 pulse per mile or 16,000 pulse per mile * 8,000 ppm cruise output Additional benefits: * Three different calibration options * Input signal can range from 2,000-200,000 pulses per mile * State-of-the-art signal averaging software that ensures smooth pointer operation, even in fluctuating signal conditions * Noise-reducing, filtered power output for powered speedometer signal generators As a tachometer interface Input source options: * High-voltage coil signal input source (typically the negative side of an ignition coil) 0.5-6.0 pulses per revolution (1-12 cylinder engine) * 5-12 V square wave signal input source from aftermarket ignition box or ECM * Inductive gear tooth sensor input source, 32-510 tooth range Output: * Signal output 12 V square wave, 50 percent duty cycle * 2, 3, or 4 pulses per revolution (4, 6, or 8 cylinder) * 3 preset flywheel tooth settings
( 7 )
$149.95
Intellitronix GPS speedometer senders are designed to connect directly to your electronic speedometer to give you extremely accurate readings! No additional sensor from the transmission is needed to operate your speedometer. They will work with all Intellitronix or any other manufacturer's speedometers that accept an industry standard 4,000, 8,000, or 16,000 pulses per mile signal, or with any programmable speedometer. The senders come complete with a GPS receiver, an on-circuit-board antenna, and a microprocessor with LED status indicator that continuously convert GPS signals into a pulse stream that replicates the output from your mechanical speed sensor, but with GPS accuracy. You won't have anymore inaccurate speedometer readings due to different tire sizes or rear-end gear ratios.
( 80 )
$141.91
Manufacturer Rebate
AutoMeter Programmable Electronic Speedometer Senders convert your mechanical speedometer takeoff or electronic sensor-style speedometer output to an electronic pulse output. They're designed for use with custom installations, early model transmission applications, and all AutoMeter electronic speedometers. The senders are available in different styles for a variety of auto make applications.
( 55 )
$109.99
—
$117.99
Use a New Vintage USA speedometer sender to convert your mechanical speedometer takeoff or your electronic sensor-style speedometer output to an electronic pulse output. These speedometer senders are designed for use with custom installations, early model transmission applications, and all Marshall electronic speedometers.
( 15 )
$109.99
Use these Stewart Warner senders to convert your mechanical speedometer takeoff or electronic sensor-style speedometer output to an electronic pulse output. They are designed for use with custom installations, early model transmission applications, and all Stewart Warner electronic speedometers and tachometers. One sender can operate two tachometers or two speedometers. Max rpm is 3,500.
( 5 )
$184.99
—
$199.99
Whether you're replacing worn-out speedometer components or updating your system, these American Powertrain adapters allow you to convert your setup to a screw-on type speedometer cable. Make sure you're running at a safe speed with quality parts from American Powertrain.
( 3 )
$119.99
VDO SingleViu Series tachometer gauges represent the latest up-to-date technology by VDO. These gauges offer benefits like dual-input capability for both analog signals and J1939 CAN networks, display of J1939 fault codes, and a durable, weather-resistant construction. They also feature advanced stepper motors to provide precision accuracy, programmable warnings, and multi-colored RGB LED illumination for easy readability in various lighting conditions. Select the model for your application needs. Key features of the SingleViu Series include: * Dual-input capability—each gauge can be configured to work with either traditional analog senders or a J1939 CAN network, without needing extra hardware like converters or master gauges * Fault code display—the gauges can show J1939 system fault codes on the integrated LCD screen for quick diagnostics * Advanced stepper motors provide precise and accurate readings for the tachometer's needle * Programmable warning light allows users can set a programmable max RPM warning light * Gauges have water-resistant and fog-proof construction, suitable for harsh environments—made with double-glazed, shock-resistant mineral glass and environmentally sealed housings * RGB LED illumination provides adjustable, multi-colored illumination for the dial and display, which is ideal for different lighting conditions * The anti-reflective lens coating and 240-degree display angle improve readability * Built-in LCD display shows additional information such as hour meter, voltage, and clock * Spin-Lok mounting hardware included * Requires standard Molex MX150 waterproof connectors for the electrical connections
Not Yet Reviewed
$195.99
—
$232.99
New Vintage USA programmable speedometers are easy to set-up and can use inputs from virtually any speed sender, OE or aftermarket. The units will even accept input from many PCMs, all without any converters or conversion boxes. These gauges feature a remote-mount programming button to keep the real glass face clean. The speedometers are easily calibrated by hitting the button, driving a mile, and hitting the button again. No confusing DIP switches. The analog units are available in different diameters, gauge ranges, and face/number colors. Each dial features a beautiful titanium smoke bezel. Kits include a speedometer, mounting hardware, programming button, and harness (if required).
( 1 )
$229.99
New Vintage USA Woodward Series speedometer gauges are easy to set-up and can use inputs from virtually any speed sender, OE or aftermarket. They will even accept input from many PCMs, all without any converters or conversion boxes. The Woodward Series speedometers feature real glass lenses and a remote mount programming button to keep the gauge face clean. Programmable speedometers are easily calibrated by hitting the button, driving a mile and hitting the button again, and is also easily accomplished any time tires or gears are changed.
( 2 )
$229.99
Moeller Marine fuel level conversion capsules convert your swingarm mechanical sending unit's fuel level reading from a standard direct-sight gauge to a standard electric dash-mounted gauge. They're designed for tanks from 7 1/2 in. to 22 in. deep. Get your fuel level readings more conveniently—at the helm—with a Moeller Marine fuel level conversion capsule. Features and items: * Calibrated to industry standard 33-240 ohms * Includes Moeller Marine fuel tank sender mounting kit (5-hole gasket set)
Not Yet Reviewed
$114.99
Accutronix T-bar gauge mount adapters give you a place to mount your stock gauge bracket after you switch to T-bar handlebars. These adapters feature a machined quality billet aluminum construction—and they're available in a choice of finishes: chrome, natural aluminum, polished, and black anodized finishes.
Not Yet Reviewed
$108.99
—
$131.36
HardDrive dual gauge mount bracket kits are made of steel. These brackets allow for the easy mounting of your speedometer and tachometer. The kits are available in black and chrome finishes, and include the backing plates and hardware needed.
( 12 )
$189.86
—
$192.56
Kuryakyn Informer LED gauges keep a low profile and are a perfect match for their flush-mount gas caps. Informer's sleek design incorporates both an LED fuel gauge and an LED battery gauge. The fuel gauge has a string of color-coded LEDs to indicate fuel level and Kuryakyn's patent-pending design allows the rider to select the fuel level at which the red "empty" LED illuminates.
Not Yet Reviewed
$176.99
Monitor your engine's rpm with Biker's Choice custom mini tachometers. Available with mechanical or electronic sending units, these tachometers are 12 V lighted with a 2 1/2 in. diameter face for any time visibility. Biker's Choice custom mini tachometers include a chrome mounting clamp and are available with a black or white face.
Not Yet Reviewed
$106.65
Kuryakyn LED mesh fuel and battery gauges are must-haves to complement your existing mesh gas cap. They're plug-and-play direct replacements for your stock fuel gauge with the LED fuel level and battery voltage indicators. These LED mesh fuel and battery gauges feature a low-profile, 3-piece design, and easily disassembles to custom-paint individual components. Want to trick out the look for your bike? Order the Kuryakyn LED mesh fuel and battery gauges for a cool custom-look. LED mesh fuel and battery gauge features: * Instant view of both fuel level and battery voltage with ultra-bright LED display * Replaces stock fuel gauge with plug-and-play wiring * Available with chrome aluminum frame with satin black baseplate and chrome steel mesh, or satin black frame, baseplate and mesh
Not Yet Reviewed
$204.99
A fuel cap sits on top of the tank like a crown on a queen's head. Have you ever seen an uninspiring, plain, and ordinary crown of the queen? Of course not. That's why Performance Machine thinks Harley-Davidson® motorcycles need to be honored with a custom crown for their fuel tank. Throw away the mundane OEM cap and screw-in a premium PM upgrade for a high-end look of royalty—without the high-end price! CNC-machined from aircraft-grade aluminum, these unique Merc Black Ops vented fuel caps are an instant custom addition to your bike and will complement the Merc cover line of accessory designs. The Performance Machine propriety LED fuel gauge is user-programmable for multiple applications and features bright LED lights that energize when full and shut off as fuel level drops.
Not Yet Reviewed
$144.95
A fuel cap sits on top of the tank like a crown on a queen's head. Have you ever seen an uninspiring, plain, and ordinary crown of the queen? Of course not. That's why Performance Machine thinks Harley-Davidson® motorcycles need to be honored with a custom crown for their fuel tank. Throw away the mundane OEM cap and screw-in a premium PM upgrade for a high-end look of royalty—without the high-end price! CNC-machined from aircraft-grade aluminum, these unique Apex Black Ops vented fuel caps are an instant custom addition to your bike and will complement the Apex cover line of accessory designs. The Performance Machine propriety LED fuel gauge is user-programmable for multiple applications and features bright LED lights that energize when full and shut off as fuel level drops.
Not Yet Reviewed
$144.95
Manufacturer Rebate
Clearance
AutoMeter pillar gauge pods are the perfect solution for mounting your new AutoMeter instruments. They're easy to install and mount securely to your windshield A-pillar. Each pod is custom-designed to fit your vehicle's make and model year precisely. Choose the style you need to accommodate from one to four gauges. AutoMeter's durable ABS plastic pods are available in various colors and gauge diameters, and can be painted to match your stock interior, if desired.
( 330 )
$102.99
—
$108.99
If your sending unit has gone south, then you need to get one of these Dorman sending units. They're made from high-quality materials, so you know that they will fit.
( 19 )
$118.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
