Availability
Showing In Stock Items. Show All 24 Items.
On Sale
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 5 )
$124.95
$112.45
On Sale
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$167.95
—
$199.95
$151.15
—
$179.95
On Sale
Agility Auto Parts offers a complete line of fuel tank sending units covering a wide variety of North American vehicles. These sending units are engineered to meet or exceed all OEM specifications. They're corrosion-resistant, leak-resistant, and made of durable materials for long-lasting use. Agility Auto Parts fuel tank sending units are available in a range of sizes and attachment styles. Order the model recommended for your applications.
( 2 )
$111.99
—
$215.99
$100.79
—
$194.39
On Sale
Aeromotive offers fuel level sending units designed for use with aftermarket fuel cells and tanks, such as 6, 15, or 20-gallon capacity models. These replacement or upgrade 10 in. tube-style units have a 0-30 Ohm rating and work with your vehicle's fuel gauge to indicate the current fuel level.
Not Yet Reviewed
$162.85
$146.56
On Sale
Aeromotive fuel pump bladder baffle sets are a complement to the APEX Phantom systems. They open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The Phantom bladder baffle can ensure this. Installed in the inlet passages at the base of the Phantom bladder, the new Phantom bladder baffle increases the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
Not Yet Reviewed
$118.25
—
$279.55
$106.42
—
$251.60
On Sale
AEM Electronics offers high-quality stainless steel PSIa sensor kits in 15 (1 BAR), 30 (2 BAR), 50 (3.5 BAR), 75 (5 BAR) and 100 (7 BAR). PSIa is referenced to absolute zero—the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 psi when the sensing element is exposed to atmospheric pressure at sea level; however, they can be recalibrated to read zero at atmospheric, and a negative number at values less than atmospheric pressure.
Not Yet Reviewed
$184.95
$166.45
On Sale
Aeromotive fuel pump bladder and baffle sets are a complement to the APEX Phantom systems. These bladder baffles open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The new Phantom bladder and baffles can ensure this. They increase the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder and baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
( 1 )
$212.15
—
$268.95
$190.94
—
$242.06
On Sale
Edge EAS pressure sensors come equipped with the proper wires and connectors to plug right into the Universal Sensor Input system. This will save you time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Edge Accessory System pressure sensors can be used to monitor boost psi, fuel rail pressure, air bag pressure, lift pump pressure, pre and post intercooler pressure, and much more.
( 1 )
$207.95
$187.15
On Sale
Holley EFI analog display gauges use digitally-delivered information over Holley's sophisticated CAN bus or wire directly to your sending unit, providing your ride with a classic readout. Those using the bus get their data from the Holley ECU, meaning that you don't have to run wires all over the vehicle. All you have to do is run a single cable to the ECU and then daisy-chain the rest. Holley analog gauges are available to monitor a variety of automotive temperature and pressure functions, along with programmable fuel level and voltage options. Product features include: * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric style and may include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on application) to ensure accurate movement in street and racing conditions * CNC-machined billet aluminum bezels with an anodized finish on some models * Threaded bodies allow a single bezel nut to hold the indicators firmly in place * Bezels are threaded for easy replacement with multiple bezel options available * Each is tested to ensure a top-quality, accurate gauge
( 15 )
$236.95
—
$249.95
$130.95
—
$224.95
On Sale
Holley analog standalone gauges provide you with a simple yet modern way to monitor all types of engine and drivetrain functions. Their slim-style mounting requires very little depth, and all of the gauges feature dimmable LED backlighting to ensure you can always see the indicator, no matter the environment. Holley analog standalone gauges are available in a variety of data types and ranges for temperature and pressure monitoring, along with programmable fuel level and voltage options. Features include: * Designed for a 2 1/16 in. openings * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric-style and include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on model) to ensure accurate movement in street and racing conditions * Spin lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum bezels with anodized finish * Bezels are threaded for easy replacement; multiple bezel options available * Each gauge is tested to ensure a top-quality and accuracy
( 2 )
$190.95
—
$192.95
$106.95
—
$171.85
On Sale
AEM wideband UEGO air/fuel ratio gauge kits unite unsurpassed accuracy, speed and control with an easy to read, digital interface. They are able to be used with virtually any engine management system, such as the AEM EMS or FIC. The kits feature a Bosch sensor with an accuracy of .1 AFR, making it among the fastest and most accurate widebands available. AEM Electronics digital wideband air/fuel UEGO kits' bright LED display shows A/F ratio in .1 increments, and the sweeping LED "needle" lines the edge and changes color as air/fuel ratio changes from rich to lean. The digital UEGO's come with both silver and black bezels and white and black faceplates that are easily interchangeable.
( 240 )
$149.95
—
$199.95
$134.95
—
$179.95
On Sale
The FuelTech WB-O2 Nano is a compact, efficient wideband oxygen sensor tool for use in monitoring and adjusting combustion. They're designed to condition and read the Bosch LSU 4.2 wideband oxygen sensor with speed and precision for a broad range of mixtures--in addition to storing the engine's most important information, allowing a detailed analysis of its operation status. The WB-O2 Nano features a channel for capturing the engine's RPM signal, as well as four other analog channels that can be configured, for a total of six channels of storage capacity in its internal memory. Another important feature of the FuelTech WB-O2 Nano is the unit's high-speed USB connection, which allows easy connectivity to a notebook or computer, thus eliminating the demand of serial adaptors and facilitating equipment operation, as external feed is not necessary. Additional details: * O2 sensor reading is sent via CAN to the ECU and recorded in the internal datalogger, without using any analog input * Can be mounted in driver's compartment for quick reference--and adding O2 sensor to the ECU doesn't occupy valuable analog input channels * IP67 waterproof rated * Extended reading scale 0.35 to 9.99 Lambda, 5.15 to 147 Gas A/FR, 2.24 to 64 alcohol A/FR * CAN communication with PowerFT line
( 1 )
$199.00
$169.00
On Sale
AEM Electronics X-Series digital GPS speedometers pack a lot of features into one high performance gauge. These versatile instruments will track speed, heading, and altitude. Despite the larger LED display, they're housed in a standard 2 1/16 in. diameter case and feature a slimmer profile to mount anywhere. Additional features: * Integrates with the Infinity ECU, Series 2, or EMS-4 via AEMnet CAN bus to add track mapping * 24 green outer LEDs for quick reference to engine parameter * Peak/recall via gauge face buttons * User-selectable units of measurement (US or metric) * 0-5 V analog outputs for transmitting data to EMS or data-logger * Auto-dimming sensor delivers ideal display brightness * Positive locking connectors provide secure connection * Optional silver bezel with white faceplate accessory kit available (sold separately; see Suggested Parts tab)
( 13 )
$199.95
$179.95
On Sale
Shoot for top performance with Holley Sniper shift lights. These compact standalone units allows for endless mounting locations--above a rearview mirror, on the A-pillar, or right in front on the instrument cluster. They are available in black or silver billet aluminum housings with multi-adjustable mounts, and as a direct wire or OBD-II plug connection. The shift lights feature seven super-bright LEDs with five intensity settings (including off). Holley Sniper shift lights also feature: * Smoked front LED and side display lenses for a stealth look when powered off * Simple hookup--does not require the use of a tachometer adapter * Compatible with all 1 to 12 cylinder gas or diesel engines with any ignition system * Adjustable shift point selection in 10 rpm increments * Easy-to-read rpm display and set buttons located on the side of shift light * CAN version has 8 ft. cable with OBDII connector * Direct wire version has 4 ft. wiring harness with non-terminated ends * Available peak recall of maximum rpm achieved * 4.25 in. length, 0.75 in. diameter
( 32 )
$174.95
—
$212.95
$117.95
—
$179.95
On Sale
MSD standalone wideband gauges are a brand new line designed to be highly accurate and feature-packed. These units are completely standalone with an easy-to-read analog dial. The slim styling not only looks great, but requires very little dash space to mount. Each gauge has an internal microprocessor which controls the pointer movement and keeps it accurate no matter the conditions. Order the model you need for monitoring specific data. This line of gauges feature: * Adjustable LED warning light, allowing both low and high trigger point settings * Peak recall button allows the user to view min/max gauge readings * CNC-machined billet aluminum bezels with an anodized finish * Includes a Bosch LSU 4.9 wideband oxygen sensor * Compatible with all fuel types * The spin-lock ring threads to the back of gauge case for simple and secure gauge mounting * Great for EFI or carbureted applications
Not Yet Reviewed
$399.95
$219.95
On Sale
For fast response times, AEM X-Series wideband UEGO air/fuel sensor controller gauges are a great option! Built on the unique, patent-pending X-Digital technology, they report accurate information quickly— enabling you to tune your engine more efficiently. These gauges have modern, visually striking faceplates with 7-segment center displays that are 87 percent larger. They're ultra-slim and come with black bezels and black dual-faced faceplates for air/fuel and Lambda. The displays are user-configurable and feature auto-dimming. Additional features: * Bosch 4.9LSU wideband UEGO sensor * Factory-calibrated resistor does not require free-air calibration—but technology allows for free-air calibration as sensor ages, if user desires * Compatible with vehicle/system voltages up to 16 V * 0-5 V and RS232 output for data-logging and feedback control * AEMnet (CANbus) for data-logging and daisy-chaining multiple controllers up to 16 cylinders * Can display AFR values in hundredths of a percent * 52mm gauge diameter and slim 0.825 in. gauge depth * Gauge cup depth only .200 in. deep * Locking connectors
( 210 )
$217.95
—
$279.95
$196.15
—
$251.95
On Sale
Classic Instruments offers matching tachometers for their 1933-34 Ford car gauge clusters. These 3 3/8 in. 8K tachs come in a chrome mounting cup—and will be a stylish interior asset for your vintage vehicle.
Not Yet Reviewed
$249.95
$224.95
On Sale
AEM Electronics X-Series pressure gauges display exceptional looks, increased readability, and a multitude of features. Easier to read, mount, and use, they are a must-have for accurate diagnostic, oil, and boost pressure readouts in your high performance vehicle. Features include: * Reversible black face (psi/BAR) and black bezel * Optional silver bezel with black/white faceplate accessory kit available (sold separately; see Suggested Parts tab) * 2 1/16 in. (52mm) gauge diameter for easy mounting in gauge pods * Slim 0.825 in. overall gauge depth and 0.200 in. cup depth—mount them virtually anywhere! * Programmable center LED is 87 percent larger than original AEM gauges * 24 green outer-edge LEDs offer quick reference to engine parameter * User-selectable standard or metric display (PSI/BAR) * Peak/Recall via gauge face buttons * User-selectable threshold warnings * AEMnet CANbus-enabled for transmitting data to EMS or data-logger * 0-5 V analog outputs for transmitting data to EMS or data-logger * Auto-dimming sensor delivers ideal display brightness * Positive locking connectors provide secure connection
( 33 )
$177.95
—
$308.95
$160.15
—
$278.05
On Sale
AEM Electronics digital display gauges feature 24 color-coded LED lights that change from green to yellow to red for immediate reference to the measured parameter. They use a standard 52mm diameter housing that fits in most gauge pods and can be remotely mounted virtually anywhere. The gauges include interchangeable silver and black bezels and white and black faceplates that allow you to personalize the look to your liking. Choose from among a half-dozen instruments provide feedback for specific functions. A harness and sensor are included, so you can easily wire up the gauges and begin monitoring your engine.
( 34 )
$199.95
—
$238.95
$179.95
—
$215.05
On Sale
AEM Electronics X-Series temperature gauges are must-haves for accurate oil, water, and transmission temperature readouts in your high performance vehicle. These digital gauges include many new technological features that make them easier to use. Combine those perks with exceptional looks with increased visibility, and you'll agree: X-Series temperature gauges are hot. Features include: * Black water temperature face and black bezel * Available accessory kit with silver bezel; white water, transmission and oil temperature, and black transmission and oil temperature faceplates (sold separately; see Suggested Parts tab) * 24 green outer-edge LEDs offer quick reference to engine parameter * Auto-dimming sensor delivers ideal display brightness * Programmable center LED is 87 percent larger than original AEM gauges * User-selectable standard or metric display (100 to 300 F/40 to 150 C) * User-selectable threshold warnings * Peak/recall via gauge face buttons * AEMnet CANbus-enabled for transmitting data to EMS or data-logger * 0-5 V analog outputs for transmitting data to EMS or data-logger * 33 percent larger gauge face display makes it easier to see at a glance * Standard 2 1/16 in. (52mm) diameter housings for easy mounting in gauge pods * Slim 0.825 in. overall depth and 0.200 in. cup depth--mount them virtually anywhere * Positive locking connectors provide secure connection
( 3 )
$227.95
$205.15
On Sale
AEM Electronics X-Series boost/fuel pressure gauges feature large digital displays and a double-sided faceplate, with Boost PSI on one side and Fuel Pressure PSI on the other. Their LED display is readable at a glance; the gauges are easy to mount and easier to use with a smarter interface. AEM X-Series instruments offer accurate boost or fuel pressure readouts for your high performance supercharged or carbureted vehicle. Additional features: * Programmable LED is 87 percent larger than original AEM gauges * 24 green outer LEDs for quick reference to engine parameter * Slim 0.825 in. overall gauge depth and 0.200 in. cup depth * Peak/recall via gauge face buttons * AEMnet CAN bus-enabled for transmitting data to EMS or data-logger * 0-5 V analog outputs for transmitting data to EMS or data-logger * Auto-dimming sensor delivers ideal display brightness * Positive locking connectors provide secure connection * Optional silver bezel with white faceplate accessory kit available (sold separately; see Suggestion Parts tab)
( 6 )
$238.95
$215.05
On Sale
Holley's incredible line of digital precision gauges with an analog-look includes Holley GPS speedometers. They're offered in 3 3/8 in. and 4 1/2 in. diameter versions, with black or white face. You won't find a better GPS-based speedometer on the market. No connection to the transmission is required, so they're a breeze to install. In addition to mph, they show quarter-mile time; 0-60 mph time; mileage/trip odometer; direction; and time of day. Additional GPS speedometer details: * GPS antenna with a 15 ft. long cable allows you to place the antenna in the most convenient location—nearly anywhere in or on the vehicle * Hot-start feature means that the GPS is usually displaying speed data within 2-3 seconds of power-up * Compatible with Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices * 240-degree sweep pointer from 8 to 4 o'clock makes them easy to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to the back of the gauge case for simple and secure mounting * CNC-machined billet aluminum bezels with anodized finish—threaded for easy replacement
( 15 )
$372.95
$205.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
