Availability
Showing In Stock Items. Show All 18 Items.
Fragola Performance Systems stainless steel inner support springs add an extra measure of support to high-vacuum applications with stainless braided hose. To install them, use a solid rod smaller than the inside diameter of the hose and then slice the end of the rod and wind the inner support spring into the hose. Remember the old adage--an ounce of prevention is worth a pound of cure!
Not Yet Reviewed
$251.99
—
$275.99
Classic Tube manufactures top-quality, pre-bent brake lines from stainless steel or OE steel. Made with state-of-the-art, computer-driven CNC tube benders to factory specifications, these line kits come complete with fittings and are an exact match for your vehicle. Hundreds of Classic Tube kits are available, covering virtually every make, model, and braking system imaginable.
( 245 )
$143.99
—
$210.99
The Stop Shop offers complete brake line sets for a wide range of vehicles—including models from Chevy, Buick, Pontiac, and Oldsmobile. These pre-bent copper, steel or stainless steel sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set recommended for your application.
( 34 )
$102.99
—
$249.99
Radiator hoses manage the flow of coolant, removing excess heat from the coolant before returning it back to your engine. Failed hoses can lead to coolant loss, overheating, and engine damage. To service, restore, and maintain your Ford classics, Scott Drake radiator hose sets are obtainable in several options covering several vehicle applications. Most are 3-piece sets that include bypass hose, and all include upper and lower coolant hose. Many of the sets feature a lower nylon-reinforced radiator hose with a stainless steel support spring to prevent the hose from collapsing. Scott Drake radiator hose sets are constructed from silicone or other premium materials providing a direct fit and lasting durability.
( 43 )
$110.95
The Stop Shop offers CNC-bent front brake lines that are exact factory replacements on specific vehicles, which uses the original proportioning valve and bracket. Simply remove all original rusty lines and put the new tubes in place. The brake lines are available in 304 stainless and Galfan coated steel tubing. Tube nuts are made from steel, plated for corrosion resistance; and the fittings and tube size will match factory tubes. Spring guards to protect the tubing will be in factory positions (if stock tubes had spring guards). Order the front brake lines recommended for your vehicle.
( 6 )
$107.99
The Stop Shop offers complete formed front brake lines for specific vehicles. These pre-bent steel or stainless steel brake line sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set for your application.
( 1 )
$149.99
The Stop Shop offers brake tubing for a wide range of vehicles. These CNC pre-bent lines are exact reproductions of the factory lines. The tube nuts are machined from plated steel for corrosion resistance; and fittings and tube size will match the factory tubes. Spring guard to protect the tubing will be in factory positions (if stock tubes had spring guards). Whether you are working on a classic car or daily driver, The Stop Shop has the hard-to-find parts you need. Order the replacements recommended for your application.
( 2 )
$128.99
—
$239.99
Four Seasons offers more than 150 liquid line hose assemblies to help you service the air conditioning system on nearly any vehicle. When your A/C isn't operating efficiently, the culprit is often a plugged or leaky fluid line. These replacements are offered in a variety of styles and sizes, most with gaskets and O-rings or seals to facilitate a complete installation. Some (but not all) lines include orifice tubes. Each aluminum or aluminum/rubber hose is constructed with double wall barrier material compatible with R134A or R12. Various end attachments include spring locks, P-nut fittings, or female threads. Order the liquid line assembly recommended for your application.
( 7 )
$157.99
Are you doing a spring-over conversion or installing a lift? Trail-Gear brake line sets offer steel braided construction, 26 in. of length, and DOT approval to get the job done. And you can use your factory mounting clips with the front lines. These extended brake line sets available for front axles, rear axles, or a complete set. Stop! Replace your brake lines with Trail-Gear brake lines.
( 1 )
$119.99
The Stop Shop assembled brake tubing kits will help you facilitate restoration and repair on your vehicle for optimal braking performance. Choose The Stop Shop brake tubing kit best suited for your plumbing project.
( 25 )
$185.99
Replace your worn-out or rusty brake lines with one of the Dorman stainless steel hydraulic brake line kits! These lines are pre-formed for a wide variety of vehicles, saving you the time-consuming steps of bending, cutting, and flaring your own tubing. Every Dorman kit includes all of the brake lines and fittings needed to complete the job.
( 273 )
$127.95
—
$155.95
ACDelco GM Genuine Parts brake hydraulic lines are quality reinforced lines that carry fluid within the brake system and are GM-recommended replacements for your vehicle's original components. These original equipment brake lines are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. Stay with the parts brand your vehicle came with and enjoy peace of mind that the fit and performance is up to the high standards and specifications of General Motors.
( 1 )
$212.99
Motorcraft brake hoses are direct-OE, high-strength replacements for your Ford, Lincoln, and Mercury vehicles. Made from premium materials, these front and rear hydraulic brake hoses will maintain your vehicle's stopping power and your peace of mind. Brakes are important to you and your passengers' safety. Motorcraft brake hoses will deliver the proper fit, performance and reliability for your vehicle.
Not Yet Reviewed
$216.99
Hose assemblies play an important role in A/C system performance by carrying refrigerant and lubrication from one component to another. Poor manufacturing can lead to restricted refrigerant and oil flow to the compressor, resulting in catastrophic system failure. Four Seasons air conditioning discharge hoses are designed to minimize refrigerant loss. Their fittings are permanent beadlock types with lightweight, rust-free aluminum construction. These hoses are made to OEM specifications for a correct fit and each one is 100 percent inspected to ensure bend pipe consistency is maintained through a highly precise CNC-bending machine. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Four Seasons. Features include: * Contains gaskets, O-rings, seals, and charge port fittings to properly replace the hose * Constructed with double-wall barrier hose compatible with R134A or R12 * Hose wall thickness and burst pressure exceeds OE requirements * Application specific design * Tubing meets OE wall thickness and fitting specs * Pad block fittings match OE * Orifice tube meets OE in fit, form, design, and function * Welds and connections are the same as OE with no refrigerant flow restrictions • Ferrule crimp exceeds OE tensile test requirements * All fixed brackets are included on hose assembly
( 53 )
$101.99
—
$106.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
