Availability
Showing In Stock Items. Show All 15 Items.
Hot fuel reduces performance, makes consistent engine starting difficult, and can lead to vapor lock. DEI Under Tank Reflect-A-GOLD Heat Reflection Kits are the perfect solution for air-cooled engines. Just line the underside of your tank with the self-adhesive material, and you'll easily reduce heat soak on your fuel tank. Kits include a 24 in. x 24 in. sheet of Reflect-A-GOLD, and a 1 1/2 in. x 15 ft. roll of GOLD Tape. The DEI Under Tank Reflect-A-GOLD heat reflection kits arrive with enough product to cover the bottom of most powersport bike tanks--enabling your ride to withstand continuous temperatures of 850 degrees F.
Not Yet Reviewed
$121.99
Funk Motorsports offers turbo heat shields for a wide range of (universal) applications, as well as vehicle-specific models for select BMW, Honda, Ford, and Subaru vehicles from 2002 and up. These turbo and/or turbo wastegate thermal blankets work to insulate the hot side and retain the heat within the exhaust gasses themselves. Hotter gasses accelerate faster, leading to them leaving the system sooner—improving spool up and throttle response. Insulating the turbo also helps to lower the amount of heat that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time. The 4-layer shields are offered in three finishes: titanium twill, carbon fiber twill, and inside out (for turbos in contact with a heat source). Additional details: * Inside-out blankets have internal material mirrored on the outside, as well * Available for a variety of turbocharger and wastegate styles * A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines, electronics, and even bodywork positioned close to the turbo from the dangers of excess heat * Funk shields feature specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. The new fireproof ultra-high temperature stainless steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1,300 degrees C * New, thicker internal heat lagging insulation provides up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities * ROHS tested and approved to ensure compliance and desired parameters * NOTE: Turbo blankets are not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regard to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsports takes no responsibility for fluid contamination their products.
( 1 )
$101.95
—
$263.67
Do you want to know a great way to shield your wiring, lines, and cables safe from heat? Use Heatshield's Thermaflect sleeves! They act as thermal barriers, capable of reflecting up to 90 percent of radiant heat away, and can withstand 1,100 degrees F of continuous radiant heat and 500 degrees F of direct heat. Now, that's impressive! They're great for use on your fuel lines, wiring looms, air intake, intercooler pipes, air conditioner hoses, and more. By keeping the fuel and air intake temperatures cool, they help to deter vapor lock, improve performance and mileage, and reduce fuel evaporation. Achieve superior radiant heat protection--use Heatshield Thermaflect sleeves!
( 68 )
$105.99
—
$276.99
By wrapping your headers with Thermo-Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent, and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust wrap can withstand continuous heat up to 2,000 degrees F, and installs easily with standard hose clamps or the optional stainless steel Snap Straps.
( 114 )
$110.35
—
$260.03
Design Engineering Fire Sleeves offer ideal protection against intense underhood heat, making them perfect for protecting hoses, oil and fuel lines, and electrical wiring. The Fire Sleeves are constructed of a woven fiberglass braided sleeve heavily coated with 100 percent iron oxide silicone rubber. They are capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent.
( 27 )
$214.99
DEI offers Titanium Protect-A-Wire kits that are designed to provide exceptional thermal protection for spark plug wires, lines, and hoses from extreme engine and exhaust heat using proprietary Titanium LR fiber technology. These Protect-A-Wire kits can withstand direct heat up to 1,800 degrees F and radiant heat up to 2,500 degrees F, preventing wire burnout, hardening, and cracking. The Protect-A-Wire kits from DEI also offer oil and chemical resistance, a professional appearance, and include numbered high-temperature heat-shrink tubes for a secure, water-tight seal, making them ideal for high-performance and street applications. Key features and benefits: * High-quality material—constructed from a high-temperature resistant basalt fiber material, ensuring long-lasting protection * Extreme heat resistance—the Titanium LR fiber material can withstand extreme temperatures, protecting vital components from direct and radiant heat from exhaust manifolds and headers * Prevents wire damage by shielding spark plug wires, hoses, and electrical cables from high under-hood temperatures, these kits prevent burning, cracking, hardening, and short circuits * The protective sleeves are resistant to oil and various chemicals, further enhancing its durability in a harsh engine bay environment * Professional looking finish—the kit adds a clean, custom, and professional look to the engine bay, complementing the color and weaving of the sleeve * Easy installation—the kits include heat-shrink tubes that provide a professional and secure, water-tight seal on the ends of the sleeve * Versatile application—in addition to spark plug wires, the sleeves can be used to protect various lines and hoses, such as fuel lines, oil lines, and speedometer cables
( 13 )
$101.99
Heatshield Products Fire Shield sleeves are made from braided fiberglass yarns in a flexible substrate and coated with rugged, high-grade silicone rubber. This coating makes them resistant to most chemicals, including hydraulic fluids, oils, and fuels. It also resists fraying and abrasion. They are non-combustible and ideal for use on brake lines, fuel lines, wiring harnesses, cables, and more. Heatshield Fire Shield sleeves will withstand 450 degrees F continuous heat and reduce up to 60 percent of radiant heat.
( 23 )
$125.99
—
$189.99
Walker heat shields are designed to reduce heat radiated from tailpipes that are routed close to gas tanks or flooring. The heat shields are available in a variety of sizes to fit your needs.
( 5 )
$152.99
—
$190.99
Prevent vapor lock and shift cables from melting with Lava hot rod sleeves from Heatshield Products. The heat shields for fuel lines combine the best of two worlds, the flexibility of a rugged hot rod sleeve with the strength of lava rock fiber. Lava fiber is naturally acid, chemical, brake fluid, and chemical-resistant. Additionally, the fiber is 25 percent stronger than fiberglass and is abrasion-resistant. The special braid of these tube heat shield sleeves allows them to have an expandable inside diameter up to 15 percent. To expand the inside diameter, shorten the length or bunch up the Lava hot rod sleeve to allow it to slide on over fittings and terminals. Once over, expand or stretch the length to tighten the sleeve onto the line or hose. To cut, use a sharp knife or pair of scissors. Each kit includes four heat shrinks to seal the ends of the oil line heat shield sleeve to the cable, tube, or hose it is protecting. Remember a loose-fitting heat shield sleeve is okay if the ends are sealed to prevent heat from getting trapped between the sleeve and the component it is protecting. The 10 ft. long sleeves are available in diameters ranging from 1/4 in. to 1.5 in. Additional details: * Heat shield loom and Hot Rod Sleeves shield harnesses and fuel lines even in harsh environments. They can reduce radiant heat damage and prevent vital fluids such as fuel from overheating. * Rated for 1,100 degrees F * Maximum ambient temperature: 2,000 degrees F * Lava fiber resists chemicals, oil, fuels, and even acid * Heat shield protection for: -- Fuel lines -- Brake lines -- Transmission lines -- Oil lines -- Turbo lines -- Harnesses
Not Yet Reviewed
$150.99
Dress up your hot rod with an old-school look, but with modern heat shield technology, by using Heatshield hot rod sleeves. The special weave of these thermal sleeves allows them to expand and contract over fittings and terminals. They're capable of withstanding 1,100 degrees F continuous and are non-flammable. They're perfect for shielding fuel lines, helping to stop vapor lock and protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. Do you have a custom build ahead of you? You'll want to use Heatshield hot rod sleeves.
( 147 )
$112.99
—
$232.99
Funk Motorsports silver heat sleeving allows both protection of vital lines and signal cables, while at the same time keeping your engine bay or cabin tidy. Silver heat sleeving uses malleable high-temperature silica with a heat-reflective material laminate, and is designed to easily slip over cables and lines in situe, without the need for any line or cable disconnecting. Funk Motorsports extremely popular silver heat sleeving is now offered in Velcro® form and is available in a variety of diameters and lengths. With silver heat sleeving by Funk Motorsports, you can protect your vehicles sensitive lines running close to turbos, manifolds, and more! Order the silver heat sleeving in the diameter and length needed. Benefits and features: * Easy fit, Velcro® heat sleeve * Reflects away radiant heat—withstands direct heat of up to 250 degrees C * Available in a variety of diameters and lengths, silver Velcro® heat sleeving can be easily cut to size for any application * Protection sleeve is also suitable for 4 AN, 6 AN, 8 AN, 10 AN, 12 AN, and 16 AN hosing * Provides protects for important lines and feeds within your engine bay to ensure the consistent transfer of fluids to important components to ensure optimum performance over time * Protects vital lines and feeds that are sensitive to heat. Protect fuel lines running close to a manifold or oil return lines positioned close to the hot side of the turbo to prevent failure or even worse—fire! * Reliability—although all may seem well initially, heat can gradually build up to a huge issue after time on track or on fast road applications, this heat sleeving helps reduce brake fade and vapor lock by protecting crucial fluid lines on your vehicle to ensure optimum reliability over time Important Note: This heat sleeving is not designed to be in contact with, or in very close proximity to a heat source (such as an exhaust or a turbo). As a first line of defense, it is recommended moving line as far away as possible from the heat source to provide the best level of protection, then shielding this further using one of these heat sleeves.
Not Yet Reviewed
$140.62
Funk Motorsports gold heat sleeving is designed to work in temperatures of up to 450 degrees C, and it is easy to use, simply slide and secure over sensitive lines and feeds for extreme heat protection. Available in a variety of diameters and lengths, gold heat sleeving can be easily cut to size for any application. Protect your vehicles sensitive lines running close to turbos, manifolds, and more with gold reflective heat sleeving by Funk Motorsports. Order the heat sleeving designed for your application. Product Overview: * Gold heat sleeving is designed to simply slide over wiring/pipework * Available in a variety of diameters and lengths * Gold heat sleeving can be easily cut to size for any application * Withstands constant temperatures up to 450 degrees C * Protects important lines and feeds within your engine bay to ensure the consistent transfer of fluids to important components to ensure optimum performance over time * Protects vital lines and feeds that are sensitive to heat * Protects fuel lines running close to a manifold or oil return lines positioned close to the hot side of the turbo to prevent failure or even worse—fire! * Reliability—although all may seem well initially, heat can gradually build up to a huge issue after time on track or on fast road applications, this heat sleeving helps reduce brake fade and vapor lock by protecting crucial fluid lines on your vehicle to ensure optimum reliability over time Important Note: This heat sleeving is not designed to be in contact with, or in very close proximity to a heat source (such as an exhaust or a turbo). As a first line of defense, it is recommended moving line as far away as possible from the heat source to provide the best level of protection, then shielding this further using one of these heat sleeves.
Not Yet Reviewed
$270.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
