Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
95 Results Found For "back"
Showing In Stock Items. Show All 117 Items.
Allstar Performance Pontiac V8 Timing Covers
Are you in need of timing components for your Pontiac V8? Allstar cast aluminum Pontiac V8 timing covers have timing marks that include a water pump backing plate and two coolant inserts. These timing chain covers are designed to fit most 1969-79 Pontiac V8 engine models, including the 350, 400, and 455.
( 27 )
$219.99
King HP-Series Cam Bearings
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 17 )
$115.99
—
$149.99
Kanter Main Bearings
Kanter Auto main bearings are available for a wide range of classic vehicles, including many Buick, Chevy, Oldsmobile, Pontiac, DeSoto, Plymouth, Dodge, Edsel, Ford, Mercury, Studebaker, GMC, Hudson, Cadillac, Lincoln, LaSalle, American Motors, Nash, and Jeep models. Main bearings hold the crankshaft in place within the engine block and allow it to rotate smoothly on a thin film of oil. Order the set recommended for your application. Product details: * The main bearings support the crankshaft as it rotates. * A thin film of oil flows between the rotating crankshaft and the bearing shells, preventing direct contact and reducing friction. * They are typically plain or journal bearings made with a steel backing and a thin lining of a bearing alloy. * The main function is to allow the crankshaft to spin with minimal wear and to absorb the tremendous forces generated by the engine. * Kanter Auto focuses on providing parts for older vehicles, including main bearings designed for specific makes and models from the classic and muscle car eras. They supply high-quality, precision-fit parts to help restore and maintain engine performance in these vehicles.
Not Yet Reviewed
$189.99
—
$249.99
Kanter Cam Bearings
Cam bearings provide a low-friction surface, supporting the cam shaft, allowing it to spin freely, and critical for proper engine operation. Kanter offers new cam bearings for old cars, covering all domestic makes and models from the 1930s to the 1980s. Made from quality materials, they will provide the proper fit and function to repair or restore your vehicle's operation. Available individually or in sets, select the Kanter cam bearing(s) needed.
Not Yet Reviewed
$109.99
—
$169.99
King SV-Series Rod Bearings
King SV-Series rod bearings provide movement with minimal power loss. Connecting rod bearings provide rotating motion of the crank pin within the connecting rod, which transmits cycling loads applied to the piston, and King SV-Series will provide this function well to handle your extreme load engines. These King SV-Series connecting rod bearings are copper-based and lead-free, offering great wear resistance, as well as load capacity.
( 3 )
$162.99
King BB-Series Cam Bearings
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$102.99
—
$152.99
Summit Racing™ Hi-Performance Cam Bearings
Summit Racing™ Hi-Performance Cam Bearings are designed for racing and other high-performance applications. A manufacturing process that features improved materials and optional coatings for higher fatigue resistance when running higher RPM's and valve train loads makes them an ideal upgrade component for your performance or racing engine build. Summit Racing™ Hi-Performance Cam Bearings are available individually and in sets. .
Not Yet Reviewed
$149.95
Sealed Power Cam Bearings
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 118 )
$113.99
—
$134.99
OMIX-ADA Main Bearings
Are you doing an engine rebuild? OMIX-ADA main bearings offer the right fit and function to do the job right. They will help reduce the friction between your crankshaft and engine. Get the quality direct-fit main bearings to fit your application from OMIX-ADA.
( 2 )
$109.99
Clevite H-Series Main Bearings
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 141 )
$101.99
—
$242.99
King XP-Series Main Bearings
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 45 )
$100.99
—
$187.99
ACDelco GM Genuine Parts Camshafts
ACDelco GM Genuine Parts camshafts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for your Chevrolet, Buick, GMC, or Cadillac vehicle. For optimal performance, choose a replacement camshaft that you know will fit and function like the original from ACDelco GM Genuine Parts camshafts.
Not Yet Reviewed
$127.99
Clevite P-Series Main Bearings
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 254 )
$100.99
—
$192.99
ACL Performance Race Series Rod Bearing Sets
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 9 )
$100.99
—
$210.99
Mahle Original Premium Piston Ring Sets
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 56 )
$100.99
—
$240.99
Ford Performance Parts High-Volume Oil Pumps
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 46 )
$115.99
Auto Metal Direct Valve Covers
Most engine parts perform much better when the oil is kept in … and dirt is kept out. So it is with your cylinder banks. Auto Metal Direct valve covers perform an invaluable function with big and small blocks on such makes as Chrysler, Dodge, Plymouth, Chevy, and Mopar. Covers are available for restoration vehicles as far back as the late 1950s, in finishes such as chrome, natural steel, zinc, and painted. They look great and fit even better, with wire tabs and hold-down brackets as correct as the originals. Valve covers are very noticeable parts when you pop the hood at a car show—find the Auto Metal Direct set for your powerplant and keep those rocker arms rockin'.
( 8 )
$159.99
—
$229.99
Summit Racing™ Muscle Car Replacement Cams
Restore or recreate the legendary performance and sound of the Muscle car era with Summit Racing™ MCR or Muscle Car Replacement camshafts. Available in hydraulic or mechanical lifter designs, these cams mimic the specs of the originals—but are produced on today's CNC grinders using modern lobe technology to give you better performance and reliability. Bring back the good old days and get that muscle car back on the road; order the camshaft model recommended for your engine application.
( 18 )
$147.99
—
$237.99
JE Pistons Pro Seal Premium Sportsman Series Piston Rings
JE Pistons Pro Seal Premium Sportsman Series piston rings are designed to maximize horsepower through precision sealing of combustion pressure. The piston rings are available in a huge selection of sizes, various materials, and in multiple thicknesses to suit a variety of engines. JE Pistons also offers an array of custom piston ring services including back cutting, dyke cutting, lapping, grinding, and PVD coating. These are the same services used by top NHRA Pro Stock and NASCAR teams—and are now available to the public, offering tremendous gains in durability, power through reduced friction, and improved ring seal. Order the ring application to fit your needs.
( 15 )
$104.69
—
$124.99
Clevite V-Series Rod Bearings
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$123.99
—
$231.99
Clevite V-Series Main Bearings
If you liked the results you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series main bearings. Built on unplated steel backings, for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. Unlike Vandervell main bearings, Clevite V-Series main-bearing sets use a single-piece thrust bearing, so you don't need separate, assembled thrust bearings. Extra-clearance variations are available to provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$121.99
—
$230.99
Mahle Performance Piston Rings
Mahle Performance piston rings evolved from their pioneering use of piston ring simulation and computer development tools to develop rings that provide "free" horsepower by successfully minimizing friction. A large selection of coordinated piston ring sets is available in a variety of sizes, designs, materials, and coatings designed to exceed your high performance requirements. The difference is evident on the dyno and on the track. Features and benefits of Mahle Performance piston rings: * 1mm and 2mm steel top rings with patented HV385 supersonic thermal-spray process applied for superior bonding, increased durability, and increased scuff resistance * 1.5mm and 1/16 in. positive-twist, ductile iron, barrel-faced, plasma-moly inlaid top rings * Sport compact ring sets ranging from 81-100mm with steel-nitrided top rings * Traditional, reverse-twist, taper-faced (RBT) cast iron second rings * Tapered Hook Groove (THG) second rings that offer superior oil control when compared to traditional RBT rings * 3-piece style oil control rings in both standard and low tension * Standard-tension expanders are sold separately for select low-tension rings where increased oil control is necessary * CP-20 design oil rings that are easier to install; chemically polished for better oil drain-back with a 20 degree ear angle to ensure side seal around the ring
( 54 )
$100.10
—
$240.74
Clevite Coated H-Series Main Bearings
Clevite coated H-Series main bearings were developed primarily for NASCAR racing, but are also well-suited to other types of competition engines. They are especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. These H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. Clevite H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They come with 180 degree oil grooves, and can be ordered with an extra 0.001 in. of clearance if needed.
( 4 )
$129.99
—
$204.99
Radium Engineering Catch Can Kits
Radium Engineering catch can kits are application-specific and feature large 10 AN ORB ports, a 4 AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Offered in single and dual catch can versions, the cans are crafted from 6061 billet aluminum, O-ring sealed, and include a stainless steel filter media that is cleanable and reusable and an anodized aluminum mounting bracket. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from high performance driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Order the appropriate Radium catch can kit for your vehicle today from Summit Racing®. Additional benefits: * Less oil consumption effectively raises octane * Cleaner air increases engine performance * Prevents sludge buildup in the intake * Lowers hydrocarbon emissions
( 1 )
$161.45
—
$237.43
