Availability
Showing In Stock Items. Show All 78 Items.
Whether you are installing new fittings on a new air suspension system or replacing old or damaged fittings on an existing kit, AccuAir Suspension has you covered with their direct replacement bulkhead fitting kits. The fittings are usually made of brass construction for a high-quality component and are perfect for getting the air lines from your air springs under the car into the trunk or bed of your vehicle in a clean way without fear of drilled or cut metal damaging your air lines. Get your air suspension systems air lines safely connected to your core components by using AccuAir bulkhead fitting kits.
Not Yet Reviewed
$153.95
These VIAIR onboard air hookup kits are designed to connect your VIAIR 200AT Series air compressor to an onboard air tank, giving you compressed air in your cab with the simple flip of a switch. They include a 2 in. dash panel gauge with a power switch, a sealed pressure switch, 20 ft. of airline tube, and all necessary fittings, connectors, and brackets.
Not Yet Reviewed
$139.95
Kleinn light-duty onboard air systems offer higher pressure and capacity—which means a longer, louder blast of your horns! These kits have many features that simplify installation and prolong the life of the product. The compressor bodies are sealed and moisture/dust-resistant to make installation on the exterior no problem. The steel air tank has five ports and is configured so that no matter how you mount it, there is always a drain port available on the bottom. They also include a "snorkel system" for remote intake mounting. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order Kleinn light-duty onboard air systems. More product features, items, and specifications include: * Compressor model 6270RC (150 psi) * Remote-mount air filter housing with element (plus two replacement filters) * Heavy-duty, heat-resistant, stainless steel braided leader hose with built-in check valve, mounting brackets, and hardware * Only compressor orientation not recommended is upside-down * Black epoxy 1.0-gallon air tank with five 1/4 in.-NPT ports * Pressure switch (1/8 in.-NPT; 100 psi on/130 psi off) * Safety valve (1/4 in.-NPT; 145 psi) * Compression fitting (1/4 in.-NPT) * Drain cock (1/4 in.-NPT) * Hex Reducer (1/4 in. male x 1/8 in. female)
Not Yet Reviewed
$269.95
Rein Automotive ABC hydraulic suspension line assemblies offer technicians an OE-quality replacement solution for worn-out originals. These line assemblies ensure proper operation of the Active Body Control system. They're built with OE rubber compound hose and zinc alloy-coated OE carbon steel tubing and end fittings. Joining the hose and tubing sections of the assembly are OE hose crimp ends, brackets, and sealing hardware, all as specified by the manufacturer. The direct-fit line assemblies are leak-tested to over 2,000 psi. Order the model recommended for your vehicle.
Not Yet Reviewed
$144.99
—
$149.99
FK JMX/JMXL Series 3-piece rod ends are precision-built for high strength. The bodies and races are heat-treated steel alloy that is zinc plated and chromate treated for corrosion resistance. The ball is hard chrome plated 52100 steel, offering excellent wear and durability. These rod ends are available in a wide range of size and options, with right (JMX) or left (JMXL) hand threads. You can also choose JMX/JMXL in metric dimensions with PTFE liners for high load capacities. FK Bearings provide the expertise and quality ends to meet your needs. Order the 3-piece JMX/JMXL Series rod ends designed to fit your application.
( 43 )
$119.99
JOES Racing Products tubular upper control arms feature a dual-hole 1/2 in. aluminum or steel shaft precision-machined to close tolerances, minimizing flex and binds. They are manufactured from high-quality 0.095 in. steel tubing and have a black powdercoated finish for maximum durability. All control arms are tested on JOES control arm fixtures, allowing them to produce the most rigid parts on the market.
Not Yet Reviewed
$137.95
With the Old Man Emu BP-51 suspension kits you need to have the correct mounts. The OME BP-51 bypass shock mounting kits come with all the hardware necessary to finish the install for the front or the rear of your vehicle. The kit components have been powdercoated in an attractive black finish to prevent corrosion and keep a clean look under you vehicle. Order the shock mounting kit suited to your application needs.
Not Yet Reviewed
$104.95
Kleinn Can-Am compact dual air horns are a direct-fit, bolt-on "big noise" solution for Can-Am vehicles that can be used for enjoyment as well as safety. They are designed to be compatible with aftermarket cages that discard the OE rear-most bolt-on chassis tubes and aftermarket front shock systems that bolt only in front of the shocks or below the frame (cannot attach above sway bar bolts). Other modifications may not be compatible. The 102 Series air horn kit includes the required solenoid/valve. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order Kleinn Can-Am compact dual air horns. More product features, items, and specifications include: * Dual black XCR2.0 coated spun copper air horn trumpets, 14.5 in. long and 16.75 in. long * High pitched, painful sound * Vortex 4 electronic air horn solenoid valve (12 V) * Maximum input – 175 psi * Output at 100 psi - 146.0 dB * Output at 150 psi - 153.5 dB
Not Yet Reviewed
$199.95
If your vehicle has air horns, an air-locking differential, or just some light-duty pneumatic needs, then these VIAIR ultra light-duty onboard air systems are for you. These air systems come with everything necessary for a complete installation and provide a reliable, cost-effective solution to your onboard air system needs. Air systems feature: * 98C air compressor * 1 gallon air tank * Omega bracket with hardware * Accessory airline * Pressure switch * 40 amp relay * Two T-fittings * 1/4 in. NPT drain valve * 1/4 in. NPT compression fitting * 1/4 in. male NPT plug * 145 psi safety valve * Two 1/4 in. NPT male thread to 1/8 in. BSP female thread reducers * 20 ft. of 12-gauge wire with inline fuse holder * Electrical connectors
( 11 )
$215.27
UMI Performance Rear control arms and panhard bars are direct bolt-on replacements designed to minimize wheel hop and improve cornering and track consistency, while lowering ETs. The control arms are constructed from a DOM mild steel tubing 1.375 in. o.d. x 0.095 in. wall and are completely CNC-machined and fully TIG-welded for outstanding strength. The adjustable models feature spherical rod ends that allow for "bind-free" operation, making them great upgrades for both your track and autocross-driven vehicles. The Roto-Joint equipped models are designed to work like a spherical rod end while maintaining the qualities of a softer bushing. Roto-Joints feature a 4140 chromoly ball that rotates in a Delrin race. Additional features include: * Control arms are 1.375 in. x 0.095 in. mild steel tubing * 4130 chromoly threaded tube adapter (adjustable models only) * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end * TIG-welded construction * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves (where applicable) * Polyurethane greasable bushings * On car grease fittings (except rod ends) * Use OEM hardware
( 84 )
$189.99
—
$239.99
Equipping your ride with a compressor and inflation valves allows the air springs to be adjusted from the vehicle, making tuning much simpler. RideTech's Thomas Model 319 air compressors are rated at 150 psi maximum, and their proven dependability is the heart of their RidePro compressor systems. The compressor kits include rubber mounting feet, a 2 in. brass fitting for 1/4 in. air line, electrical connectors, and fuse holder with 20 amp fuse. Specs: * Maximum pressure: 150 psi * Volume: .50 cfm at 150 psi * Current: 19.6 amps maximum
( 11 )
$235.00
On Sale
These replacement control arms will not break the bank! These Scott Drake reproduction control arms are all-new, not rebuilt units. Scott Drake manufactures these control arms from quality materials, ensuring a good fit. Additional features include the following: * Shaft * Bushings * Riveted ball joints * Nut with cotter key * 90 degree Zerk fittings * Washers and locking nuts
( 35 )
$143.95
—
$149.95
$129.55
—
$134.95
No matter what you drive, Air Lift 1000 Load Assist rear spring kits can solve your suspension problems. These air springs are inflatable air cylinders made from tough polyurethane material and fit inside your coil springs to add up to 1,000 lbs. of leveling capacity. Each cylinder has an inflation valve, so you can vary the air pressure to level your vehicle and compensate for uneven loads. Load Assists reduce roll, sway, and bottoming out—and they're available for most cars, trucks, and minivans with open coil springs. They come complete with air lines, fittings, brackets, and mounting hardware. Order the kit recommended for your vehicle.
( 285 )
$109.99
—
$154.99
Rock Jock shackles will directly replace the stock shackles on your rig with brand new heavy-duty units. These shackles feature laser-cut, 1/4 in. thick steel side plates, Energy Suspension fluted urethane bushings, and Grade 8 greasable bolts. Each bolt has a Zerk fitting on the head for greasing of the bushings—and a center bolt-in sleeve for added rigidity. If you want to dramatically change the ride quality and off-road ability of your Jeep, then order the Rock Jock suspension shackles recommended for your application.
( 3 )
$124.00
—
$150.00
UMI Performance single adjustable lower control arms are direct bolt-on replacements designed to minimize wheel hop and improve cornering, while lowering ETs. UMI Performance single adjustable lower control arms are constructed from a DOM mild steel tubing 1.500 in. o.d. x 0.120 in. wall and a 4130 chromoly threaded tube adapter. They are completely CNC-machined and fully TIG-welded for outstanding strength. UMI Performance single adjustable lower control arms feature reinforced spring perches and heavy-duty sway bar mounting points. Their high-quality, PTFE-lined spherical rod end allows for quiet, "bind-free" performance, making them great upgrades for both your track and autocross driven cars. The polyurethane bushings are designed to be bolted to the car chassis for quiet, comfortable operation. The control arms feature polyurethane bushings, zinc plated steel sleeves, and "on-car" greasable Zerk fittings. Additional features include: * QA1 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves * Powdercoated finish * Use OEM hardware
( 26 )
$209.99
—
$229.99
Are you hauling or towing? Suspension rear block kits from ReadyLift Suspension will give your truck the needed rake to do the job. Based on OEM designs and made from hefty cast iron, these blocks will safely lift the rear of your truck 1 to 3 in., while maintaining that factory ride. So, whether you're hauling a load or just fitting those oversized tires, ReadyLift rear block kits are what you need.
( 14 )
$134.99
—
$269.95
No matter what you drive, Air Lift 1000 Load Assist spring kits can solve your suspension problems. These inflatable air cylinders are made from tough polyurethane material, and fit inside your coil springs to add up to 1,000 lbs. of leveling capacity. Each cylinder has an inflation valve, so you can vary the air pressure to level your vehicle and compensate for uneven loads. Load assists reduce roll, sway, and bottoming out, and are available for most cars, trucks, and minivans with open coil springs. They come complete with air lines, fittings, brackets, and mounting hardware.
( 16 )
$112.99
Gabriel air shock fill hose kits let you mount valves in a convenient place for pumping up those air shocks. There might just be a little more bounce in your step when you're finally able to add air and lift to your shock absorbers with ease! Kits include: * Four tube nuts * Four tube clamps * Ten packing O-rings * Tube * Tee block with air valve fitting * Valve core * Washer * Two hex nuts * Seal
( 39 )
$103.99
If you enjoy the outdoors as much as your 4x4 off-road machine does, then these VIAIR quarter-duty onboard air systems are for you. These air systems are suitable for many small pneumatic needs, including the inflation of outdoor recreational items and air horns. Built with a 25 percent duty cycle, these VIAIR quarter-duty onboard air systems can operate for about 10 minutes of continued used, provided that you give them a 30-minute cool-down afterwards. Air systems feature: * 275C air compressor * 2 gallon air tank * Accessory airline * Pressure switch * 40 amp relay * 1/4 in. NPT drain valve * 1/4 in. NPT compression fitting * 145 psi safety valve * 20 ft. or 12-gauge wire with an inline fuse holder * Electrical connectors
( 3 )
$249.95
Enhance your Jeep Wrangler's handling and performance with JKS quicker disconnect sway bar end links. The quicker disconnects have a heavy-gauge steel construction and computer-controlled MIG-welding to ensure unsurpassed strength and quality. Powdercoated finish offers added durability. The quicker disconnect sway bar end links are sold in pairs and are available in applications to accommodate vehicles lifted for 0 to 2-inch lift or vehicles 2.5 in. to 6 in. lift. Select the quicker disconnect sway bar end links designed for your vehicle's specific application needs. Product features and details: * Heavy-gauge steel construction and computer-controlled MIG-welding ensures unsurpassed strength and quality * Durable, black powdercoat finish for long-lasting corrosion resistance * Allows you to easily correct the sway bar geometry of lifted Jeep Wranglers for better handling * Available in applications for vehicles lifted for 0 to 2-inch lift or vehicles 2.5 in. to 6 in. lift * The quicker disconnect sway bar end links for 0 to 2-inch lifted vehicles include a pair of frame mounted retention brackets to keep the links and sway bar in place when disconnected * Quicker disconnect sway bar end links for JL or JT Jeeps with 2.5 in. to 6 in. lift feature quick-release pins that make it easy to decouple and reconnect your front sway bar * Dramatically improves off-road performance on stock or modified Jeeps low-profile grease fittings to ensure easy bushing lubrication and protection from trail damage * Variable length design adapts to your vehicle and future modifications * Straightforward, bolt-on design makes installation easy using basic hand tools * Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
Not Yet Reviewed
$176.95
Air Lift offers a variety of replacement sleeves for your Ride Control or Slam Air suspension helper system. These air bags, fittings, and hardware are available to replace dozens of original air spring kit part numbers. Order the model designed for your application.
( 28 )
$112.99
—
$115.99
Mevotech TTX control arms have been engineered and designed to handle whatever tough work you can throw at them. TTX parts are built to provide extended maintenance cycles and keep your vehicle on the road. Features include: * Sintered metal bearings for superior durability * Thicker flange to provide increased stiffness to prevent deforming * Castle nut and easy snap cotter pin(where required) with Nylok thread adhesive pre-applied for optimal fastener retention * Grease fitting for ease of lubrication(where required) * Repel-Tek finish for extreme corrosion protection
( 10 )
$111.50
—
$184.99
McGaughy's rear air bag helper kits feature 2-ply reinforced commercial-grade bellows, which mount between the spring and frame. They can be inflated from 5 to 100 psi to level loads of up to 5,000 lbs. on large pickups and vans, wreckers, ambulances, motor homes, and commercial trucks. McGaughy's rear air bag helper kits include bellows, air lines, fittings, brackets, mounting hardware, and instructions.
( 21 )
$170.99
Bilstein B8 5165 Series shocks offer a universal fit, with the benefits of a remote reservoir. Your custom-lifted truck or SUV will gain an increase of shock oil capacity for greater heat dissipation and damping sensitivity. The 5165 shocks are a monotube design featuring a zinc finish with Bilstein's unique, multi-layer coating for extreme protection. Plus, their design allows for increased wheel travel and more shaft movement by locating the "floating" dividing piston in the reservoir. Additional features: * Special swivel banjo fittings on the reservoir hose allow for 360 degree rotation * Includes reservoir mounting kit and detailed instructions * Available in 5 in. to 14 in. travel lengths with various linear valvings
Not Yet Reviewed
$237.00
—
$256.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
