Availability
Nitrous Express Digi-Set nitrous time delay switches are just what you need to activate a second stage of nitrous oxide. You can also use them to delay your single stage to get the traction best suited to your driving needs. The length of delay is user-settable and can be fine-tuned for best results.
( 1 )
$206.71
Nitrous Express low-flow safety switches designed for use with NX water/methanol injection systems can trigger a boost cut solenoid or a timing retard module. They are engineered to activate a safety mode in case you run out of water/methanol, and allow for a safe tune in those instances where no water/methanol injection is present and an aggressive tune when water/methanol is utilized. Nitrous Express low-flow safety switches feature a fully adjustable alarm set point, retard timing-detailed instructions on integrating with popular aftermarket ignitions, optional solenoids to open wastegates or bypass valves to reduce boost, faster response time, as well as display real time flow in ml/min and an overflow alarm for leak detection.
Not Yet Reviewed
$225.95
These NOS single stage electric pack wiring kits have everything that you need to properly wire an NOS single stage nitrous oxide kit. They include a microswitch and bracket, activation switch, relay, harness, and the necessary connectors for a trouble-free nitrous installation.
Not Yet Reviewed
$105.95
Maintain optimal bottle pressure with Nitrous Outlet X-Series nitrous bottle heater kits. These high-temperature silicone wraps warm your 5, 10, or 15 lb. bottles efficiently to keep the inputted bottle pressure concise. And that means a better performing nitrous system with a consistent flow of nitrous, pass after pass. The kits include an adjustable bottle pressure switch that automatically activates the bottle heater as needed. Racing on a budget? Get higher performance at a lower price with the help of Nitrous Outlet X-Series nitrous bottle heater kits.
( 9 )
$193.99
Nitrous Outlet Dual Voltage Wrap Around Bottle Heaters warm the nitrous bottle to maintain optimal pressure, and can be used either with the 110 V wall plug or via the 12 V 14-gauge wires to be wired directly to your Nitrous Outlet switch panel. Bottle pressure is key in a well-performing nitrous system, and helps keep a consistent flow of nitrous—pass after pass. Additional details: * Bottle heaters have been tested, refined, and tested again to assure perfect fitment on 10, 12, and 15 lb. nitrous bottles of all brands * Bottle heater will fit all brand nitrous bottles and is easily installed and removed with one Velcro® wrap. * High-temp silicone * Maintains bottle pressure * 12 V, 300 watts, 21.74 amps
Not Yet Reviewed
$132.99
—
$225.99
Nitrous Express remote nitrous bottle valve openers save you a trip to your trunk! Are you still getting out of your car to open your nitrous bottle? Or, maybe you already have a remote setup, but need a new motor? These Nitrous Express remote nitrous bottle valve openers offer just the motor to keep you inside of your car. Flip the switch (not included), and you're ready to blast off!
( 1 )
$151.06
Zex will help you deliver the best performance out of your nitrous system with these ZEX adjustable nitrous bottle heaters. Performance enthusiasts know that heating your nitrous bottle to achieve 900-1,000 psi is the key to ultimate nitrous system performance. To achieve this, the Zex heaters feature fully adjustable, precision pressure controlled by a pressure switch. This results in the most consistent and reliable way to maintain race-winning nitrous horsepower. In addition to the adjustability and precision of these ZEX adjustable nitrous bottle heaters' design, these kits also feature an industry-leading 240 watt heater element. This high-power element warms up cold bottles in just minutes and gives you the heating power needed to properly maintain consistent nitrous pressures under all racing conditions.
( 2 )
$274.95
Purge the air from your lines with Nitrous Express mainline nitrous oxide purge systems to allow for the immediate activation of your nitrous system. They allow you to purge the system, even without a purge port built into your solenoids, and they can also be used to lower the bottle pressure for spot-on performance every time you activate the systems. They are available in two hose sizes. Includes: * Purge solenoid * 4 AN adapter fitting * Push-button activation * 1/8 in. to 1/8 in. NPT fitting * 1/8 in. NPT to compression fitting * 7 in. of 3/16 in. stainless tubing
( 22 )
$131.21
On Sale
Holley multi-map selectors are specifically designed for use with Holley Dominator EFI systems. They allow up to four different calibrations to be selected at vehicle key-on. The included switch is connected into the J3 ECU connector. Multiple maps can be used for many different purposes, such as various fuel types or octanes; charting track conditions, nitrous setups, and more.
Not Yet Reviewed
$172.95
$155.65
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
