Availability
Showing In Stock Items. Show All 18 Items.
These Holley Sniper 2 EFI PDM main harnesses includes the switched 12V power wire, main battery power and ground, coil input wire, and HyperSpark distributor connector. They feature a braided split wire loom to keep the wires protected and your engine bay clean! They are intended to be used on applications with a PDM, and do not include a fuel pump relay. Holley Sniper 2 EFI PDM main harnesses include: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse * One 20 ft. 20 gauge fuel pump trigger wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12V ignition wire
( 3 )
$145.95
Holley Sniper EFI remote idle air control brackets are designed to gain clearance on some Sniper EFI 2x4 installations. With select intake manifolds, the distributor housing and IAC valve on the back of the Sniper EFI throttle body are fighting for the same real estate. This plug-and-play remote IAC kit utilizes the factory Sniper EFI wiring, IAC connector and valve to relocate the IAC off of the throttle body for a clean installation. A filter is pre-installed on the relocation bracket, and the IAC plug is included to plug off the IAC port on the main body.
( 3 )
$163.95
Holley Sniper 2 EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil - input wire, and HyperSpark distributor connector. This harness is braided split-wire loom to keep the wires protected and your engine bay clean! Holley Sniper 2 EFI main wiring harnesses feature: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse with cover with mounting tab for a secure installation * One 40 amp 5-pole relay with mounting tab for a secure installation * One 20 ft. 12 gauge fuel pump 12 V power wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12 V ignition wire
( 1 )
$212.95
Holley Sniper EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil input wire, and magnetic distributor input wire. These kits also include 6 ft. of 3/8 in. black braided split wire loom to keep the wires clean and protected from abrasion. Includes: * 5 ft. of 12-gauge main battery power wire * 5 ft. of 12-gauge main battery ground wire * 30 amp fuse and cover with mounting tab * 40 amp 5-pole relay with mounting tab * 20 ft. of 12-gauge fuel pump 12 V power wire * 3 ft. of 20-gauge crank signal positive wire * 3 ft. 20-gauge crank signal negative wire * 3 ft. 20-gauge coil input wire * 5 ft. 20-gauge switch 12 V ignition wire
( 1 )
$164.95
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$196.99
—
$228.99
These Cyclone intake manifolds from Professional Products are designed to fit engine swaps using the 1996 and later Vortec cast iron heads or the Edelbrock E-Tec aluminum heads. These manifolds can be used on any Chevy V8 engine utilizing the late Vortec head. They have a provision for an external water bypass. These Cyclone Vortec intake manifolds feature 4-corner water outlets, dual distributor hold-downs, a square bore carb adapter and gasket, and will work with late model style water neck, alternator, HEI, and air conditioning brackets.
( 19 )
$186.99
Keep the clean air flowing with Allstar Performance aluminum air cleaners. They're race and dyno-proven, low-profile, spun aluminum air cleaners with a free-flowing design that creates more power than standard flat air cleaner assemblies. The kits include a high-flowing dropped base with a matching lid, and they feature 5 1/8 in. necks and O-ring spacers in a range of sizes for a positive seal. Allstar aluminum air cleaners are available with a black or plain finish, paper or washable elements in several heights—and are also offered with offset bases for extra distributor clearance.
( 31 )
$106.99
—
$152.99
The Stromberg 97 carburetor base plates feature a new 97 base (throttle body) with specially-designed brass fittings to help provide ported vacuum advance for your distributor. These carb base plates come complete with throttle shaft, bushes and plate, new kicker and choke lever, idle mixture screws, and springs and gaskets. Genuine Stromberg—the choice for generations of hot rodders!
( 4 )
$170.00
Top Street Performance High Performance intake manifolds are dual-plane models ideal for street performance applications. With upgrades throughout, they are designed to improve throttle response, increase your horsepower, and give you more options on the top-end. They are cast from lightweight aluminum with lower profiles and come in multiple finishes for several applications. TSP's dual-plane intake manifold are great additions to any performance engine. Additional provisions: * Ford models have nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange * Chevy models have dual distributor hold-downs, 4-corner water ports, and a choke block-off kit
( 2 )
$244.44
Edelbrock carbureted intake manifold valley plates are designed with an integrated water passage which eliminates the need for external plumbing when used with most 13-18 degree cylinder heads and spider-style intake manifolds. They allow you to retain stock water passage connections on the block without the need for any modifications. The plates are a great way to manage water distribution without the hassle of fabricating hose and fittings. Edelbrock carbureted intake manifold valley plates are available in two types--the machined plates are designed for standard applications and will retain the stock distributor location and angle, and the other plates retain over 0.500 in. more material on the flange and end rails, allowing for custom machining on tall deck applications and eliminating the need for spacers.
Not Yet Reviewed
$124.95
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 251 )
$246.99
—
$264.99
Adapt your Chevrolet low deck big block manifold to your tall block engine with these Weiand intake manifold spacers. They will enable you to use any high performance big block Chevy manifold on late model Chevy tall block truck engines.
( 3 )
$298.99
Moroso air cleaners are available in a wide variety of materials and finishes to upgrade or accent your engine compartment. They're designed to fit carburetors with a 5 1/8 in. diameter neck flange. Each air cleaner includes a PCV adapter and a matching wing nut.
( 16 )
$139.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
