Availability
On Sale
Holley accelerator pump tuning kits are composed of a selection of accelerator pump hardware components, including pump diaphragms, pump nozzles, pump cams, and related parts. Contained in a convenient plastic parts case, these kits have all that is required to properly tune and calibrate the accelerator pump circuit(s) for your street, drag, Circle Track car, or tow vehicle. A handy parts guide is affixed to the inside case cover to assist in reordering components when necessary.
( 18 )
$227.95
$205.15
Ford Performance Parts fuel pump eccentrics are designed to fit engines equipped with mechanical fuel pumps. They are used on most Ford Performance Parts small block pushrod crate engines. They feature heat-treated steel construction with chrome plated wear surfaces and are available for different size cam sprocket bolts. Features include: * Fit: 289/302/351W small block Ford engines * Used with M-6268-A302 and M-6268-B302 timing chain sprocket sets * Not compatible with stepped-faced timing sprockets originally equipped with two-piece fuel pump eccentrics
( 24 )
$134.99
King size tanks for Sportster models have been a popular choice of custom bike builders for many years. HardDrive XL King tanks will bolt to stock frame mounts and have a larger than stock fuel capacity for extra mileage. Gas caps sold separately.
Not Yet Reviewed
$178.16
Wrap up your restoration the right way with one of these HardDrive Fat Bob tanks. Mounting is made to OEM specifications for a perfect fit on stock Harley 4-speed Big Twin frames through 1984 (except Softails). They also fit custom rigid and swing arm frames. Each tank is made to accept either the FX style dual instrument dash or the FL-FXWG style large speedo dash. HardDrive Fat Bob tanks accept OEM or aftermarket gas caps and fuel valves.
Not Yet Reviewed
$267.26
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$399.95
$219.95
—
$251.95
On Sale
Holley Trick Kits are the inexpensive solution to fuel slosh in your carburetor. They contain all of the parts you need to perform a complete rebuild on your Holley carb, including a vent baffle, high-flow needle and seat assemblies, high-capacity power valves, pump cam and secondary opening spring assortments, gaskets, and O-rings. Plus, they have extra parts related to carburetor calibration that are required in order to accomplish a real performance tune. These include accelerator pump discharge nozzles and extra gaskets. A carburetor exploded view and detailed tuning guide are also included, with packaging that serves as a handy parts tray. Holley Trick Kits have it all.
( 31 )
$208.95
$188.05
Eddie Motorsports aircraft-style gas fills offer a beautiful way to top your tank! These universal fills are CNC-machined from billet aluminum and ideal for your custom application. Operation is easy with a simple lift and twist of the center tab, thanks to their easy cam opening system. These non-vented units are available in raw machined or anodized finishes, and are for use with either 1 1/2 in. or 2 in. filler hose. Your gas fill doesn't have to be boring. Choose the unique style of an aircraft-type gas fill from Eddie Motorsports.
( 3 )
$135.00
—
$142.00
On Sale
Holley electric in-tank fuel pumps provide the extra fuel required after completing other engine modifications, such as adding performance camshafts, headers, larger injectors, and so on. They use a proven gerotor-type pump and are compact enough to fit existing hanger assemblies. They're also designed for easy installation and come complete with instructions and all necessary parts, including a new strainer-type fuel filter. Dozens of models and options are available; order the fuel pump recommended for your vehicle.
( 11 )
$362.95
$178.95
—
$249.95
Upgrade your Holley or Proform carburetor body with Proform's new billet throttle base plates. Made from solid billet instead of die-cast aluminum for added strength and durability, these base plates come with button-head Torx throttle screws, adjustable secondary airflow cam brackets, timed and full vacuum tubes for accessories and tuning, slip link mechanical secondary linkage, and power valve blow-out protection.
( 32 )
$201.95
—
$206.95
These Edelbrock in-tank electric fuel pumps are designed to support performance upgrades to the intake manifold, camshafts, direct port nitrous systems, bigger throttle bodies, and more. They include all necessary mounting hardware and require no modifications to your vehicle.
( 6 )
$200.95
—
$232.95
Hybrid Racing offers cold air intake systems for a variety of racing and off-road applications, including select Honda© and Acura© models. Engineers spent countless hours testing and refining this design to ensure it was the absolute best intake available for the 8th Gen Civic Si platform. These intakes are designed to make big gains on any setup, from totally stock to high-lift cams and huge exhausts. Dyno graphs are provided to show the intake's effectiveness against its competitors, but for example, Hybrid saw 14 hp peak gain and 9 hp average gain against the stock air box. Against competing 3.5 in. cold air intakes, Hybrid saw typical peak and average gains of around 2-3 hp with a much smoother power band—meaning more power and better drivability. The first and perhaps most obvious feature of these intakes its full silicone construction. The 1/4 in. thick fiberglass-reinforced silicone tubing is sturdy enough to withstand engine vacuum and insulates your intake charge better than any metal or plastic intake on the market. This leads to very cold intake air temperatures, meaning a denser air charge and more overall power. Another power-adding feature is the included velocity stack. The 6 in. velocity stack is designed to lower inlet restrictions and allow more air into your engine, again leading to a denser, more powerful inlet charge. One very cool component in each kit is the injection molded air bypass manifold. These manifolds serve a number of functions. They provide attachment points for the factory MAF, as well as for the (included) silicone tubing that attaches to the factory valve cover vent and air bypass valve. They also have a built-in air bypass feature that allows air into the engine when the intake's filter becomes wet. This helps to avoid the dreaded hydro-lock that so many people normally worry about in heavy rain. Hybrid Racing tested the bypass valve by totally submerging an air filter in a bucket of water and running the motor. Even when totally submerged, the engine idled and rev'd safely without hydro-locking. Of course, it's still advised to practice caution when going through deep water in any car! The biggest gain the bypass manifolds provide is the reduction of parasitic Helmholtz resonance. The internal geometry of the air bypass manifold is designed to smooth out your power band. The end result is an intake that (on average) makes up to 14 hp over the stock air box and even 2-3 more horsepower than any other 3.5 in. intakes. Also included with each kit is a powdercoated steel battery tray that relocates the battery in front of the transmission to make room for this intake's massive piping. Hybrid also provides a silicone upper radiator hose to give better clearance than the stock radiator hose. Silicone tubing is provided to replace the OEM rubber valve cover breather and air bypass tube. This gives the engine bay a cleaner, more finished appearance. The kit includes all of the bolts, hose clamps, and hardware needed to install the intake and battery tray. Notes: * You will need a tuning software like Hondata's Flash Pro to tune the car after installation. This kit should be run using MAP tunes only and should not be used with the factory ECU calibration. Please note, this system is sold as a complete kit and is not offered in pieces. * Full silicone construction * Most powerful 8th Gen intake on the market * Built-in air bypass helps to prevent hydro-locking * Includes 3.5 in. velocity stack and filter
Not Yet Reviewed
$265.99
Eddie Marine Aircraft-Style deck fills are CNC-machined from billet aluminum. They use a simple cam system for easy removal by lifting and twisting the center tab a quarter of a turn. The fills are 3 3/4 in. diameter, non-vented, and are available for use with 1 1/2 in. or 2 in. filler hose. The 2 in. fills are also offered with angled filler necks. Eddie Marine Aircraft-Style deck fills are available in polished, black, or clear anodized finishes.
Not Yet Reviewed
$162.95
A tank with backbone--HardDrive Mustang tanks have spines of strong style. These steel tanks are available with a screw bung, cam-style bung, or a chrome pop-up cap fitted on the right hand side. Fit your custom application with the strong attitude of HardDrive Mustang ribbed tanks.
Not Yet Reviewed
$188.06
Custom-machined MagnaFuel anti-reversion plates keep your carburetor flowing at or beyond its cfm rating by reducing intake reversion at higher rpm. They do this by redirecting the hot gases that can rise into the intake manifold as the intake valve opens and the exhaust valve is still closing. This helps release and atomize fuel droplets that sometimes stick and drip down the carburetor bores. MagnaFuel's anti-reversion plates are machined from billet aluminum and coated in their popular purple anodized finish. If you're running aggressive camshaft profiles, then you'll need MagnaFuel anti-reversion plates to eliminate the hot gases and increase fuel atomization.
( 2 )
$118.99
—
$154.99
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 228 )
$216.99
FAST XFI fuel injector wiring harnesses allow you to incorporate non-OEM fuel injector plugs into your stock wiring harness. They're designed to be used with XFI ECU and XFI main harness's only. Available for different types and sizes of engines, they make the installation of a different style of injector no problem.
( 1 )
$191.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
