Availability
Need extra fuel ports? Nitrous Express fuel logs are offered in 3-, 4-, and 5-port versions to give your engine the extra fuel it may need. NX fuel logs are constructed of anodized aluminum for less weight, more strength, and great looks! Less restriction and more flow, go fast with Nitrous Express fuel logs.
Not Yet Reviewed
$108.29
BluePrint Engines muscle car swap air intake kits are designed to provide proper frequency and location of the mass airflow sensor used with GM controllers. They have been tested on throttle bodies from 80mm to 102mm, and each kit includes filter, tube, MAF receptacle, block-off, clamps, couplers, and hardware. Features and specs: * Red, oil-less cotton gauze washable filter * Total height from base is 7 in. * 4.750 in. black silicon cap * 6 in. inlet * Aluminum intake tube with 97.5mm I.D. * Five stainless steel hose clamps * Tube-to-filter adapter * Three silicon couplers * Silicon clean air hose * Vacuum cap * MAF block-off plate, gasket, and hardware Note: May require modifications based on the wide applications that BluePrint's engines are installed into. Custom installation and modifications, such as drilling a hole for intake air temp on some models.
Not Yet Reviewed
$129.99
JR Race Car Mikuni 28mm jet block kits provide an assortment of jets and a place to store them. These kits include 10 main, five pilot, and eight air jets, plus a billet aluminum block to screw them into when not in use. You'll have a range of jets for your Mikuni tuning with block kits from JR Race Car. Jets included: * Main jets--165, 170, 175, 180, 185, 190, 195, 200, 205, 210 * Air jets--.6, .7, .8, .9, 1.0, 1.1, 1.2, 1.3 * Pilot--.052, .055, .059, 0.63, blank
( 2 )
$143.59
AED's Pro-Series billet metering blocks feature totally tunable, screw-in, replaceable bleeds in all circuits. They feature a special-length circuit with five separate emulsion bleeds. If you're a serious tuner trying to fully maximize your combination, then these are a must! Billet blocks are available in two and three circuits with gas or alcohol. All billet metering blocks are machined from billet 6061 stock and anodized for appearance and protection.
( 1 )
$119.99
—
$127.99
Volant MaxFlow 5 filters are high performance air filters made up of five layers--four cotton gauze and one synthetic--pleated between a top and bottom aluminum screen. This design allows for the highest airflow rate possible and a very long filter life. These cleanable and reusable filters come pre-oiled and ready for use.
( 27 )
$101.90
JR Race Car Mikuni 28mm jet block kits provide an assortment of jets and a place to store them. The kits include 10 main, five pilot, and eight air jets, plus a billet aluminum block to screw them into when not in use. You'll have a range of jets for your Mikuni tuning with block kits from JR Race Car. Jets included: * Main jets--410, 420, 430, 440, 450, 460, 470, 480, 490, 500 * Air jets--.5, .6, .7, .8, .9, 1.0, 1.1, 1.2 * Pilot--65, 70, 75, 80, 85
Not Yet Reviewed
$125.29
Pro GUARD 7 air filters from aFe are specifically developed for today's demanding diesel and rigorous off-road applications. They have five layers of cotton gauze and two layers of synthetic fabric, combined with their own specially formulated filter oil, to achieve amazingly high filtration levels without sacrificing airflow. The elements are available in a variety of styles and sizes—for both universal and vehicle-specific applications. Additional features: * Integrated polyurethane bump seal * 100 percent polyurethane top and bottom * 99.7 percent filtration efficiency
( 19 )
$103.00
—
$245.00
Introducing the Turbo-Guard billet turbo inlet screens, the ultimate in turbo protection! These inlet screens are designed to protect your turbo and engine against any debris, such as pebbles and rocks, from entering the turbocharger. Crafted with precision, these screen mesh guards are machined from billet 6061 aluminum—built to withstand the harshest conditions to protect your boost system with unparalleled strength. They are available in different diameters—radiused to allow for maximum airflow. Choose from five stunning anodized finishes: black, purple, red, blue, and gold. Each color will not only complement your vehicle, they also will add a sleek, stylish flair. Upgrade your protection with the Turbo-Guard Billet today and drive with confidence for years to come! Select the billet turbo inlet screen in the size and color preferred for your application. Key features: * Unmatched durability—built to protect your boost system with unparalleled strength * Easy installation, no clamps required * Comes with 2 set screws and LockTite
Not Yet Reviewed
$139.99
—
$149.99
aFe Magnum FLOW Pro 5R air filters are available for a wide range of vehicle-specific applications, as well as universal-fit models. With up to a 38 percent increase in flow over stock, Pro 5R air filters feature factory-oiled cotton media for maximum performance. Their progressive bump seal design and polyurethane frame makes them extremely durable and simple to install. The filters are available in different sizes and styles, including panel and conical. * Washable and reusable for multiple cleaning cycles: Pro 5R filter media features five layers of progressive oiled cotton gauze for maximum performance. Deep, open pleats allow for increased surface area, flow, and dust holding dapacity * Pro 5R filter media: Progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R filters are easily recharged with aFe's Power Cleaner and blue air filter oil. * Rounded deep open pleats: aFe Power performance air filters use a rounded, evenly spaced pleat design which allows for more usable filter surface area, providing increased flow and greater dust holding capacity. * Progressive bump seal: This pliable sealing surface conforms to even the most uneven filter housing, making for a perfect filter fit and sealing surface every time. This design eliminates the use of gaskets or sealants and always goes back to its original form.
( 1 )
$103.00
—
$220.00
Volant's Primo filters address the need for extra protection from dust and debris with a washable/reusable, oil-impregnated cotton gauze filter. These Volant Primo filters feature a new filtration technology aptly called Pro-Guard 7 that's been designed to catch the smallest of particles as air passes through the filters. They're made of five layers of cotton gauze and two layers of a random-porosity, non-woven synthetic polyester fabric that are sandwiched between an epoxy coated aluminum wire mesh.
( 4 )
$101.90
—
$123.90
Get clean, cool air to your engine quickly with an aFe Super Stock Pro 5R air intake system. These assemblies vary by application, but all retain your factory air box and upgrade your stock air filter to aFe's high performance Pro 5R—five layers of progressive filtration with high airflow levels. Intake tubes are mandrel-bent for unrestricted airflow. aFe Super Stock Pro 5R air intake systems are fast performance upgrades that give your engine more cool, dense air to breathe, making it more efficient to produce more power. Order the model designed for your vehicle.
( 1 )
$205.00
—
$249.00
With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, aFe Takeda Pro 5R air filter "oiled" elements provide excellent airflow for maximum horsepower and torque. Washable and reusable, the Pro 5Rs' open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. Takeda filter elements have a pliable polyurethane flange with integrated bumps, ensuring tight, no-leak seal over the life of the filter element. Pick the replacement element sized for your intake system.
Not Yet Reviewed
$103.00
—
$169.00
aFe Aries AE1 Pro GUARD 7 air filter elements are designed to replace the stock air filter on your motorcycle or ATV for better performance, higher flow, and a longer service life. Pro GUARD 7 elements have five layers of cotton gauze and two layers of synthetic fabric, combined with their own specially formulated filter oil to achieve amazingly high filtration levels without sacrificing airflow. If you are riding in the most extreme conditions, you can put your trust in these aFe Aries AE1 Pro GUARD 7 air filter elements.
( 2 )
$112.00
aFe Takeda Super Stock Pro 5R air intake systems upgrade the airflow and performance of your vehicle—and they do it with style! Constructed of 3-ply reinforced silicone, the intake tube is resistant to cracking and hi-temp conditions; and with a smooth interior surface, this tube upgrade is engineered to increase horsepower, torque, and airflow by reducing turbulence. The Pro 5R filter is made up of five layers of pre-oiled cotton gauze media to provide maximum performance. Its progressive layering allows the filter to flow at high levels even when dirty, which makes this media perfect for street and/or track use. The Pro 5R filters are easily recharged with aFe Power Cleaner and blue air filter oil (sold separately). AFe Takeda Super Stock system features: * Outflows factory intake * 3-ply reinforced black silicone intake tube is resistant to cracking and high-temp conditions * Pro 5R 5-layer oiled washable/reusable high performance air filter features progressive layering that allows filter to flow at high levels even when dirty—which makes this media perfect for street and/or track use * Pro 5R filter is also easily recharged with aFe Power Cleaner and blue air filter oil (sold separately) * Premium stainless steel clamps for strength and durability * Unique (patent-pending) filter-to-housing interface for easy installation
Not Yet Reviewed
$137.00
Clearance
Cardone remanufactured throttle bodies use 100 percent computerized testing of motor, throttle position sensor, and articulation to ensure reliable and consistent performance. Each unit is disassembled and every component is inspected, remanufactured or replaced to ensure a durable, high-quality product. Specialized component cleaning processes prevent the throttle bore surface from being deformed—facilitating optimum airflow. For impeccable fit, function, and savings, order the Cardone remanufactured throttle body designed for your vehicle application.
( 16 )
$159.99
$111.50
—
$140.99
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 254 )
$229.99
Motorcraft replacement exhaust gas recirculation EGR valves are produced and evaluated to exceptional standards to ensure enduring quality, maximum performance, and an exact, vehicle-specific fit. As an automotive aftermarket division under Ford Motors, Motorcraft manufactures genuine and OE-quality replacement parts for Ford, Lincoln, and Mercury vehicles.
( 1 )
$105.99
Cardone new throttle bodies are guaranteed to fit and function like the original, due to Cardone's proprietary engineering standards. Each replacement unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match the original equipment, ensuring accurate airflow in all driving conditions and peak engine performance. Order the model recommended for your vehicle.
( 6 )
$185.99
Agility Auto Parts offers a complete line of fuel module assemblies covering a wide variety of North American vehicle applications. Engineered and manufactured in a highly automated and dust-free environment, they meet or exceed all OEM specifications for fit, form, and function. Premium quality is ensured through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and leaks. Agility Auto Parts fuel pump module assemblies include all the necessary components for a drop-in replacement right out of the box!
( 16 )
$146.99
US Motor Works in-tank fuel pump modules and fuel pump sender/hanger assemblies are offered for a wide range of domestic and import vehicles. From strainer to wiring, these fuel pump modules feature all-new components, wiring, and gaskets. All units are manufactured using the highest quality raw materials that are compatible with today's fuel blends. Additional features of US Motor Works fuel pump modules include: * OE-style fuel pumps rather than less expensive turbine units (where applicable) to meet or exceed OEM standards * POM plastic used for strength and durability * Thicker connector pins for increased reliability * PTFE-insulated wires for superior chemical resistance * Nitrile or Viton® used for rubber components for long life and fuel resistance * Stainless steel used for all metal components * Foam fuel float for increased reliability * Dual-strainers mounted internally and externally for superior filtration * Palladium silver fuel sensor resists corrosion from ethanol and ethanol-blended fuels * Level sensor with bifurcated contacts for long life and accurate fuel readings
( 19 )
$186.99
Carter OE replacement electric fuel pumps are manufactured in a plant that is TS16949 certified and provides the absolute latest in OE-quality certifications. This dedication to excellence, combined with in-depth OE experience, results in products that provide dependable performance that meet or exceed expectations. Carter OE replacement electric fuel pumps feature: * Factory-specified pressure and flow * OE-matched electrical connections * Accurate diameter and length * Original inlet and outlet positions * 100 percent factory-tested reliability * Roller vanes, which are more contaminant-tolerant than other designs * Carbide and brass bearings instead of plastic for longer life and smoother operation
( 186 )
$162.99
—
$185.99
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 29 )
$100.99
Available in a variety of sizes and valve flow styles, these bottles from Nitrous Express make it easy to design your system. Constructed from aluminum, they are available in white powdercoated or polished finishes.
( 6 )
$166.51
—
$243.80
Be prepared at the race track by keeping extra nitrous bottles in the trailer. These ZEX nitrous bottles are available in purple or polished finishes and come with a chrome bottle valve, a chrome bottle nut, a bottle valve fitting, a PTFE bottle valve seal, and a siphon. They come in your choice of 2 lb., 5 lb., 10 lb., or 15 lb. sizes.
( 4 )
$237.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
