Availability
Showing In Stock Items. Show All 188 Items.
These Turbosmart FCD-2 electronic boost fuel cut adjusters are designed to alter the output of a factory 5 V MAP sensor or AFM at an adjustable level to accurately raise the factory fuel cut point. They feature LED indicators for an easy setup and have an adjustable release, ensuring that you retain the safety of having a fuel cut to protect your engine from over-boosting. The Turbosmart FCD-2 electronic boost fuel cut adjusters are suitable for most turbocharged cars and are designed to be used in conjunction with a Turbosmart boost controller.
Not Yet Reviewed
$190.95
RCI air/ice fuel cooler tanks lower fuel temperatures by over 40 percent! They feature TIG-welded 5052 aircraft aluminum alloy construction with 12-bolt heavy-duty aircraft-style, flush-mount lid assemblies. Available in 4- and 5-gallon capacities, the cooler tanks may be chosen with a red, blue, or black powdercoating, or with a natural finish. Choose the tank size and finish preferred for your vehicle. Features and benefits: * Built-in 1/2 in. tubing coil * Circulates ice cold fuel in/out of tank * Fitted with ports, rollover vent, and drain * Electrical wire pass through connector * Works with external water pump to air intercooler * Works with Internal Rule 2000 water pump to air intercooler * Built-in mounting bracket for Rule 2000 water pump Note: Water pump or water pump hose is NOT included.
Not Yet Reviewed
$231.99
—
$262.99
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 28 )
$100.99
—
$179.99
VS Racing wastegates reduce the risk of blowing your turbocharged engine by controlling the exhaust gases going through the external wastegate turbo system. This helps maintain proper boost pressure on your street and race vehicles. Relieve excess pressure from your turbocharged powerplant with VS Racing wastegates, available in multiple relief diameters. Features, parts, and specs may include: * Black anodized aluminum cap * Cast stainless steel base * Inlet and outlet flanges * Clamps * Various springs
( 7 )
$159.00
—
$189.00
FuelTech boost controller dual valve kits use the active control function of the wastegate valve pressure for a more precise control of turbo pressure in street, circuit, and drag race cars. The control can be performed by time after 2-step, by gear and engine RPM, by gear elapsed time, by a single target, or by engine RPM—besides specific targets for 2-step, 3-step. and burnout mode. Modify the pressure signal for the performance you want with a FuelTech boost controller dual valve kit.
Not Yet Reviewed
$249.00
Want to achieve the perfect cooling capacity needed for your turbocharged engine application? Then consider one of our Summit Racing™ universal intercoolers. Each unit features a bar/plate design and is constructed from quality 6061 aluminum and then TIG-welded to perfection. These intercoolers are perfect for a front mount application. Reducing induction air temperatures, while significantly improving engine output is easy with a Summit Racing™ universal intercoolers. Order the size, finish, and inlet/outlet diameters needed for your vehicle.
( 14 )
$173.99
—
$233.99
Ford Performance Parts intercooler coolant circulation pumps were designed to efficiently keep supercharged Shelby GT500s cool. These electric water pumps circulate water through their supercharger intercoolers and heat exchangers. They include a rubber isolated mounting bracket and can be used in many coolant applications. Cool your Ford with an intercooler coolant circulation pumps; choose the model with options best suited for your vehicle.
( 11 )
$170.99
Holley EFI carburetor hats are the perfect complement to any blow-through installation. They feature a contoured design that promotes optimal airflow, while providing excellent hood clearance for most applications. Each hat has a 1/8 in. NPT reference port that can be used as a suitable hookup for boost gauges or carbureted fuel pressure regulators. The inlet is designed for a 3.50 in. silicone coupler (unless otherwise noted), with a sealing lip to ensure a leak-free installation. EFI aluminum carb hats are available in a natural or black powdercoat finish.
( 18 )
$237.95
—
$257.95
VS Racing intercooler piping kits come with eight tubing couplers and 16 T-bolt clamps. The polished aluminum pipes are available in multiple common diameters, such as 2.5 and 3 in. Each kit includes components to plumb a complete intercooler system. Order the size required for your application.
Not Yet Reviewed
$155.99
ZZPerformance offers high-output intercooler pumps for a variety of vehicles, including many Chevrolet and Saturn cars from the early 2000s and up. Based on the popular Bosch design, the ZZP pumps are a direct replacement/upgrade to your existing Bosch pump. They will work in any application the Bosch does—and offer improved flow over the Bosch. These intercooler pumps use the same EV1 power connector. * Specs for Model ZZ-ICP-S1: --- Flow: 35 liters per minute at 12 V / 50 watts --- Max draw: 85 watts at 14.4 V – 38 lpm --- Max continuous volts: 14.4 V --- Max fluid temperature: 190 degrees F --- 3/4 in. inlet and outlet
Not Yet Reviewed
$129.99
When the heat gets turned up, keep your cool with one of these Mishimoto ice tanks to your air-to-water intercooler setup! The secret to maintaining power levels is to ensure that your engine is getting the coolest, densest air possible. Even with an air-to-water intercooler and heat exchanger, keeping your intake air temperatures cool can be a challenge. Whether you're hot lapping at the drag strip, bouncing off the rev limiter drifting, or simply enjoying some spirited driving, giving your engine cooler air means more power and performance. Adding a Mishimoto ice tank to your air-to-water intercooler setup can help reduce IATs drastically, help reduce heat-soak, and adds fluid capacity to your system. These intercooler ice tanks are perfect for adding to an existing air-to-water system with a heat exchanger or for building a system from scratch. All Mishimoto products include their signature lifetime warranty. Product features and benefits: * Tank is constructed from fully TIG-welded aluminum * Offered in several different gallon size liquid capacities to better suit your intercooler setup * Designed with internal mounts to utilize a Rule 2000 or Rule 3700 internal bilge pump, or external pump of your choice * Large flip-open lid with lock for easy filling and secure containment of contents * Integral mounting flanges for stable and secure mounting in any location * 3/8 in. NPT drain plug for easy emptying * 1/2 in. NPT port for electrical bulkhead for water-tight wiring to internal pump * Includes 1/2 in. electrical bulkhead for wiring internal pump and 1/2 in. NPT plug if an external pump is used instead * -12 ORB inlet and outlet ports for a tight, leak-free seal * Combine with Mishimoto's universal air-to-water single pass intercooler or universal air-to-water dual pass intercooler (not included) * To complete your system, pair with -12ORB To 3/4 in. hose barb air-to-water intercooler fittings or -12ORB to -12AN air-to-water intercooler fittings (sold separately)
( 3 )
$229.95
—
$263.95
Turbosmart Kompact dual port blow-off valves offer high performance, OEM fitment, versatility, and affordability—in other words, everything you need! These BOVs feature dual ports that vent into both the atmosphere and the air intake, reducing turbo lag and eliminating cavitation. Turbosmart Kompact dual port blow-off valves are designed to be bolt-on replacements for plastic factory Bosch or Denso units. They use sequential timing to allow for quieter operation during normal driving, while still providing the benefits of a vent-to-atmosphere type BOV under race conditions. They are easily converted into full atmospheric or full bypass units by using the included port blanking plug.
( 26 )
$197.95
—
$239.95
ATI serpentine supercharger pulleys drive your request for boost! Their selection includes a choice of overdrive models--smaller pulleys to run your blower faster for more boost and power. Available in multiple configurations to suit your project.
( 14 )
$149.98
—
$219.95
Turbosmart Kompact plumb back blow-off valves replace your factory BOV with higher performance! These bolt-on replacements offer a smart choice in OEM fitment and value. Kompact blow-off valves are built tough from black anodized aluminum, providing superior flow and greater structural integrity under boost. Turbosmart flange-type plumb back blow-off valves are available in a range of styles to fit many models—especially those with constrained engine bay access. They're full recirculating, directing all excess pressure back into your intake system. Swap out your factory plastic units for reliability, quality, and value with these Turbosmart Kompact plumb back blow-off valves.
( 8 )
$148.95
—
$254.95
These AEM Electronics boost control solenoid kits will not degrade rich fuel mixtures like most common boost control solenoids. This will significantly extend life and eliminate the chance of sticking from contamination. They are pressure-tested to an amazing 100 psi and will not leak. AEM Electronics boost control solenoid kits include -4 AN fittings so that you can securely attach wastegate lines without worrying about leaking at the connection. AEM also includes the barb-style hose fittings where push-on fittings are required.
( 5 )
$135.95
For boost control select a Haltech solenoid. Available in a 3-port or a 4-port model that control a wider range of boost pressure, each includes hose fittings, rubber isolated mount, and matching DTM 2 plug and pins set. Both are compatible with HalTech ECUs. Select the boost control solenoid desired for your setup.
Not Yet Reviewed
$130.00
Bosch offers intercooler water pumps for a variety of applications, including many Mercedes-Benz cars and trucks from the early 2000s and up. A faulty water pump is a common source of power loss on Mercedes supercharged motors. These upgraded 100 percent plug-and-play replacements exceed OEM standards and are used on all contemporary AMG vehicles. Select the pump recommended for your ride. All water pumps are tested to ensure proper functionality. Torque testing is performed to verify the proper impeller-shaft mating—and can also detect loose impeller-shaft press fits. The water pumps are vacuum leak tested to ensure proper sealing; this test can detect leaks throughout the housing, seals, tube binding and plug leakage. Bosch utilizes OE mating parts and accessories to verify proper fitment in situations where the isolator grommet and bracket can be re-used. Retain them when removing the previously installed pump.
Not Yet Reviewed
$141.99
You're in the driver seat for boost control with Turbosmart! Their in-cabin boost controllers provide enthusiasts like you with boost adjustment on the run! Turbosmart manual boost controllers are manufactured from high-grade brass and aluminum, easy to install, and offer the most cost-effective way of controlling the amount of pressure going to your wastegate. In-cabin controllers feature a detent system for ease of adjustment and a gated system to bring the boost on faster. Turbosmart in-cabin boost controllers are strong, lightweight, and they put you in control from the driver seat of your turbo machine.
Not Yet Reviewed
$138.95
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$215.25
—
$273.00
Vortech crankshaft pulleys are made of 6061 T-6 aluminum that's hard anodized and built to SAE standards. They are CNC-machined for maximum surface contact and feature an improved belt traction profile.
( 11 )
$158.99
—
$199.99
Rhodes Race Cars water tanks are made specifically to support today's high-horsepower turbo/supercharged vehicles with air-to-water intercooled systems. All of the water/ice tanks are built from .100 thick, 5051 aircraft aluminum alloy—for corrosion protection and to ensure the best quality material and craftsmanship. Some models also include an intercooler pump. Choose the tank capacity and outlet/return fitting sizes needed for your application. Additional features: * Large 8 1/4 in. opening cap * 1 in. NPT coupler fittings for feed and return to help with internal pump mounting * 1/2 in. NPT vent and drain fittings * Electrical connections installed for internal pumps * Mounting tabs for ease of installation
( 10 )
$224.95
—
$249.95
Garrett Performance offers a variety of turbocharger components, including compressor wheel speed sensors. Select GTX turbochargers come standard with a fully machined speed sensor port. Just remove the bolt and screw in the appropriate kit for your application. (GT/GTX speed sensor kit not applicable on G Series turbochargers.) Garrett speed sensors work with any turbocharger to accurately determine compressor wheel speed. The instructions include detailed drawings of the exact machining specifications for all Garrett GT catalog turbochargers, as well as general guidelines for other compressor housing types. Each kit includes all necessary wiring for easy installation and simple data logging.
Not Yet Reviewed
$257.45
Vortech supercharger pulleys are made of 6061 T-6 aluminum, hard anodized, and built to SAE standards. They are CNC-machined for maximum surface contact and are available in several styles to suit your application needs.
( 42 )
$112.99
—
$202.99
Summit Racing™ 50MM blow-off valves are a pressure release system that takes the load off your turbocharger when the throttle is suddenly closed, preventing damage to both the turbo and your engine. These valves are adjustable from 0 to 50 psi, making them ideal for most boosted applications. Machined from aluminum and black anodized for durability, these blow-off valves offer a quality look for any turbo setup. They include vacuum fittings, aluminum weld flange, V-band assembly, and springs.
( 13 )
$245.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
