Availability
Showing In Stock Items. Show All 11 Items.
ICT Billet intercooler water manifold adapters are machined from premium aerospace-grade USA 6061 T-6 billet aluminum. They're offered in the most common sizes to accommodate a variety of custom plumbing applications.
Not Yet Reviewed
$115.99
—
$197.99
On Sale
BD Diesel exhaust manifold turbo adapters are an inexpensive alternative to replacing the manifold. These adapters allow for quicker changes back and forth between different turbo mounts without changing the manifold. For quick changes of your turbo head units BD Diesel has you covered.
( 1 )
$144.95
$130.46
Summit Racing™ turbo oil feed lines ensure that your system gets an adequate oil supply. We offer replacements for your OE setup, as well as aftermarket kits that prevent premature bearing failures from oil starvation. All include extra-flexible, smooth bore PTFE hose and high-quality adapter fittings. Whether you're replacing or upgrading, Summit Racing™ turbo oil feed lines are available for your application.
Not Yet Reviewed
$169.99
Milodon aluminum blower studs and aluminum nuts are designed to permit blower and manifold separation during unexpected blower explosions without causing damage to the manifold and blower housing, which would otherwise occur. These studs are used by professional racers in Top Fuel, Funny Car, and Alcohol classes and are recommended for all supercharged applications. Studs, nuts, and washers are included.
( 4 )
$105.95
Holley Lo-Ram billet burst panel ducts complement their LS Ultra Lo-Ram EFI intake manifold kits. They designed the kits for boosted engine applications requiring protection for the engine from an intake plenum backfires. Order Holley LS Ultra Lo-Ram billet burst panel ducts in your choice of quality finish to fit your standard "large" burst panels (6 1/8 in. x 3 1/8 in.). More product features include: * Designed to direct the products of an intake manifold plenum backfire and burst to the outside of the vehicle bodywork * Can be used on any intake manifold plenum fitted with a standard "large" burst panel flange * High-quality mounting fasteners
Not Yet Reviewed
$243.95
By installing a blow-off valve, you can improve boost response, prolong the life of the turbo, and of course, get that cool swoosh sound! If you want to install a blow-off valve on the Can-Am X3, there is one problem … no place for it! However, this is now possible with the Agency Power blow-off valve hose kit and adjustable blow-off valve that is designed to connect to the compressor side of your turbo and the plastic charge tube. The 3-ply silicone tube allows you to install our adjustable blow off valve with a 1 in. flange. The smooth inside of the silicone tube helps eliminate any turbulence caused by OEM corrugated designs. To run a blow-off valve on the X3, you need to pull vacuum which keeps the valve shut under boost. Because there is no pressure source to tap into, a special machined fitting is included which fits on to the intake manifold. The blow-off valve is what separates this Agency Power kit from others. The CNC-machined aluminum valve features a piston and spring design to provide sharp boost response when needed. The spring has been spec'd to accommodate the needs of the Can-Am X3 turbo system. Designed as a vent to atmosphere valve, it releases the built-up charge pressure giving you a loud whoosh sound when you let off the throttle. The top portion of the valve can be turned 360 degrees allowing you to adjust the stiffness of the spring. This gives you the control of when you want the blow-off valve to release pressure. Each valve is anodized black and features the Agency Power cursive logo laser engraved on it. Key product features: * 3-ply silicone construction * Adjustable vent to atmosphere blow-off valve * Stealth silicone hose is available in black, red, or blue * Includes vacuum block Fitment: 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2-door and 4-door. The Can-Am X3 Turbo 120 HP requires intercooler upgrade kit—this is sold as the complete BOV and silicone hose kit.
Not Yet Reviewed
$200.00
Summit Racing™ turbo header flanges give you a great starting point when fabricating a set of custom turbo headers for your ride. These flanges are cast from 304 stainless steel and then milled flat for a consistent seal on the header gasket, unlike laser-cut flanges that often have some warping. The 1/2 in. thickness provides enough rigidity and strength to support the weight of long tube headers and turbos. The port openings are counterbored for the tube diameter to locate and simplify the welding and smooth the transition into the tube without interfering with the gasket surface. Select the size needed. Check out these features below: * 1/2 in. thick 304 stainless steel flanges provide enough strength/rigidity to support the weight of long-tube headers or turbo manifolds * The ports and bolt holes are CNC-machined for a perfect fit on all Gen 3 and 4 LS-based engines * Available in 1.75, 1.875, 2.0 in. sizes * The flanges are milled flat for a consistent seal on the header gasket * The flange ports have a counterbore to locate the primary tubes and simplify header assembly. This counterbore also allows for easier access to weld the tubes internally while maintaining a smooth transition from the exhaust flange
Not Yet Reviewed
$189.99
Granatelli Motor Sports' wastegates help reduce the risk of excessive over boost of your turbocharged engine by controlling the exhaust gas pressure going through the external wastegate turbo system. This aids to maintain proper boost pressure in the manifold of your street and race engines. Control excess pressure from your turbocharged engine with a wastegate from Granatelli Motor Sports. Order the model designed for your application.
Not Yet Reviewed
$254.34
Ready for the ultimate upgrade? Wagner Tuning turbo inlets deliver first-class quality and precision with maximum performance and driving pleasure. The turbo inlets' inner diameters have been increased for the utmost air mass flow, allowing you to achieve a higher maximum output and improved response, especially with hybrid turbochargers. Wagner Tuning turbo inlets are direct replacements, enabling effortless plug-and-play installation. They are manufactured in Germany using the latest CNC technology and are made of high-strength aluminum alloy with a durable exterior finish for maximum robustness and lasting attractive appearance. Select the turbo inlet designed for your vehicle.
Not Yet Reviewed
$190.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
