Availability
Showing In Stock Items. Show All 19 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 57 )
$257.99
$109.99
—
$242.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$340.99
$180.99
—
$275.99
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 18 )
$169.99
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
—
$260.99
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 231 )
$198.99
—
$239.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$349.99
—
$429.99
$249.99
Our Summit Racing™ Stage 2 cast aluminum, dual-plane intake manifolds have a high-rise design with long, separated runners to deliver power gains in the 1,500-6,500 rpm range. They're a great addition to performance heads! These non-EGR manifolds have a square bore flange and a natural finish. Chevrolet intakes will clear HEI ignition systems.
( 57 )
$235.99
—
$243.99
Summit Racing™ LS lifter valley covers are race-ready! Manufactured from 1/4 in. thick billet aluminum or cast aluminum. They are available in a plain, polished, black anodized, or copper finish for both gen 3 and 4 versions. Plus, they're etched with the Summit Racing™ logo for a high-tech look! Replace that factory cover with Summit Racing™ LS lifter valley covers.
( 23 )
$142.99
—
$180.99
Solve those LS engine cooling issues with a Philadelphia Racing Products coolant crossover plumbing kit. Each kit comes with all of the necessary parts to complete a 4-corner water crossover on your LS engine, including -4 AN hose and aluminum fittings to fully plumb your project just the way you want it.
Not Yet Reviewed
$229.99
Your modified LS-powered cars and trucks will be easier to service with an upgrade to a race car plumbing system. These plumbing kits contain black anodized billet aluminum fittings, O-rings, stainless steel bolts, and all of the necessary hose to plumb just the front of the heads or all four corners. Choose the most desirable upgrade to your factory steam tubes--Trick Flow® engine steam line plumbing kits for GM LS.
( 75 )
$101.99
—
$148.95
On Sale
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$167.99
—
$209.99
$151.19
—
$188.99
On Sale
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 23 )
$200.99
—
$279.99
$180.89
—
$251.99
On Sale
Get connected with Holley EFI Coyote throttle body adapters! These adapter plates have a cast aluminum construction that's more durable for boosted applications, can be welded for modifications, and they are available in your choice of natural or black finishes. Choose the model for your application. Whether you're engine swapping your classic car or need to manage 4000 horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever!
( 1 )
$179.95
—
$190.95
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds were developed for all 8,000 plus rpm applications such as drag racing and tractor pulling. They feature a 2-piece design with interchangeable top covers so you can mount either single or dual Dominator-style carbs. They're made from thick-wall A319 aluminum for durability and the lower manifold feature bosses for nitrous and fuel injection nozzles. The lower manifold and top covers are sold separately; both pieces are required to make a complete manifold assembly. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 2 )
$124.99
Offenhauser Turbo Thrust intake manifolds are tall, 2-piece, Tunnel Ram style intakes that make big power. They're available for popular U.S. V8s, both big blocks and small blocks. You can select the desired performance level by choosing among the different top sections, which are available for single and dual quads, including the Holley 4500. There also are top sections for boat-racing applications, where more torque is needed at lower revs, such as for jet drives. Power increases range from 1,800 rpm to 6,800 rpm with one quad, and 8,500 rpm with dual quads. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$270.99
Edelbrock Victor tunnel ram top is for use with 4500 series carburetors and their Victor Tunnel Ram base manifolds only. They are designed with larger openings to accommodate throttle bore sizes up to 2.31 in. without modification and are wider to accommodate the larger runners in the new manifolds. Carburetors will need to be mounted sideways in order to clear the manifold.
Not Yet Reviewed
$270.95
BBK spacers are designed to lower air and fuel temperatures significantly by reducing the heat transfer from the lower manifold to the upper manifold. The spacers are made of durable phenolic resin and are CNC-machined to ensure a perfect fit. Each spacer comes with gaskets and bolts as needed.
( 6 )
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
