Availability
Showing In Stock Items. Show All 8 Items.
Dorman fuel injector control modules are designed to restore proper fuel deliver to the engine. They're built to factory specifications for a direct-fit and easy installation. The modules are available for different engines and configurations based on your specific application.
( 13 )
$176.99
FuelTech Peak and Hold 8A/2A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The peak and hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with impedance below 1.5 ohm * 16 Bosch 160 lbs./h (1600cc) injectors (4 per channel) * 8 Siemens low-impedance injectors (2 per channel) * 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector) Package includes: * 1 Peak and Hold 8A/2A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
Not Yet Reviewed
$219.00
FuelTech Peak and Hold 4A/1A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The Peak and Hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with 1.5 to 3 ohms of impedance * 8 Bosch 160 lbs./h (1600cc) injectors (2 per channel) * 4 Siemens 83 lbs./h injectors * 4 MSD injectors (with 2 ohms impedance per injector) Contents of package: * 1 Peak and Hold 4A/1A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
( 1 )
$219.00
Holley Sniper 2 EFI Power Distribution Modules (PDM) are cost-effective and optional accessories that isolate the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. The PDM also distributes power to your EFI fuel pump and a single fan (second fan can be ground triggered through the included input/output harness). Two additional 2-amp circuits can power low-current accessories like gauges or to trigger relays. Battery and a switched 12 V source are all that's required from your vehicle to power the PDM. Product details: * Provides conditioned Power, Ground and Switched connections for ALL components within a Sniper 2 EFI install. (Throttle Body, Fuel Pump, HyperSpark Ignition System, and Optional Fan) * 3 relay channels – 15 amp Powertrain (Sniper throttle body and ignition system) 25 amp - Fuel pump output – 25 amp fan output * LED status indicators, show you which channel is triggered at a glance * Removable cover for easy accessibility, with wiring diagram built into the lid, like a fuel panel
( 6 )
$189.95
Holley Sniper 2 EFI Bluetooth modules, the cutting-edge solutions designed to take your vehicle's performance to the next level, provide unparalleled control and customization for your engine. Being able to wirelessly connect to your vehicle's EFI system using Bluetooth technology allows the convenience of adjusting and optimizing your engine parameters directly from your iOS or Android-based smartphone. Stay informed about your engine's performance with real-time monitoring, and receive instant updates on crucial metrics, such as fuel injection, air-fuel ratio, ignition timing, and more. Sniper 2 EFI Bluetooth modules empower you to fine-tune your engine parameters to match your specific driving preferences and performance requirements. The intuitive and user-friendly interface of the accompanying Sniper EFI mobile app makes tuning your Sniper 2 EFI system a breeze. Whether you're a seasoned automotive enthusiast or a novice, the Sniper 2 EFI Bluetooth modules ensure a seamless tuning experience for all users. Achieve the perfect balance between power, fuel efficiency, and responsiveness. Features: * Built in Sniper EFI Wizard, basic tuning, advanced tuning, and input/output control, as well as customizable data monitor * Quickly make basic, or advanced tuning adjustments, change rev limiter RPM, or adjust idle settings without firing up a laptop * Explore Sniper EFI ecosystem parts to upgrade your ride, or easily access technical documents and installation articles for immediate assistance * Next generation mil-spec-style M8 positive lock connector makes installation easy and secure
( 1 )
$223.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
Restore your vehicle's fuel economy and return your engine to its original performance with Dorman fuel injection wiring harnesses. These direct-fit replacements are available for different metering styles and applications. They're designed to ensure proper fitment and performance.
Not Yet Reviewed
$184.95
Bosch Motorsport electronic throttle bodies (ETBs) are designed to control the fresh air delivery of spark ignition engines in combination with an electronic throttle control (ETC) system. ETB applications with flex-fuel, CNG and LPG are permissible if injected in the air flow after the throttle body. A typical ETC system includes the following components: electronic throttle body, accelerator pedal module, and electronic control unit. Additional features of Bosch Motorsport electronic throttle bodies include: * Many bore diameters available * Opening direction: most are counterclockwise; select ETBs are clockwise * Two redundant sensors control the throttle position * All ETBs have an idle air position * Temperature range: -40 to 284 degrees F (-40 to 140 degrees C) * ETBs can be connected directly to control units with ETC functionality * Supply voltage: 6 to 16 V * Supply voltage sensor: 5 ± 0.2 V * Output signal I: 0 to 5 V for 0 to 90 degrees * Output signal II: 5 to 0 V for 0 to 90 degrees
( 22 )
$119.99
—
$176.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
