Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
14 Results Found For "End"
Manley Steel H-Beam Connecting Rods
Manley steel H-beam connecting rods are made from forged 4340 steel alloy. They're packed full of performance features, such as a compact uniform-grain structure for ultimate strength, full machining, stress relieving, and magnafluxing. The wrist pin and big end bores are honed to a +/-.0002 in. tolerance, and the wrist pins get a bronze alloy bushing. These units include cap screw ARP 8740 alloy rod bolts, and each rod set is weight-matched to within 2 grams. Available individually or in a set, order the model recommended for your vehicle year/make and engine application.
( 10 )
$103.73
—
$230.64
Instant Rebate
Mahle PowerPak Pistons
Mahle PowerPak pistons are forged pistons with steel pins and wire locks. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. Part numbers with T on the end have a cutting edge ceramic-based thermic barrier. The barrier is resistant to thermal shock, insulates the piston crown, and reduces heat transfer to increase performance. These replacement pistons are available in a wide variety of size options for fitment with specific engines and pistons.
( 2 )
$100.53
Moser Engineering C-Clip Custom Order Alloy Axles
These NHRA and IHRA-accepted premium alloy C-clip axles from Moser Engineering are custom built specifically for your vehicle. Induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. Available with a press fit or screw in stud axle flange and choice of stud diameters. Studs not included. All Moser C-clip axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing. All custom order axles are Special Order and Non-Returnable.
( 6 )
$200.00
ICON FHR Series Piston and Ring Kits
ICON pistons have introduced a new forging line: the FHR (Forged Head Relief) Series. This new line features VMS 75 alloy, true arc-style lock rings, broached pinholes, breakthrough oil returns, and 5/64 in. ring packs—all designed to be easy on your wallet! In addition, most flat-top and dish applications are available in an offset pin design, which will help to quiet those street motors. The included piston rings will seal mild to high-compression engines, help to protect against oil blowby, and feature standard ring end gap for an easy installation.
( 5 )
$134.93
—
$156.23
Borgeson Universal Steering Shafts
Get your steering hooked up using one of these Borgeson universal steering shafts. You can use them to help build that custom steering system you're after. The shafts are made from quality materials and available in different lengths and ends to fit your steering system.
( 165 )
$222.82
Classic Tube Fuel Vapor Lines
Classic Tube offers precision pre-bent tubing for all of your automotive needs, including vapor lines. Made from 304 grade stainless steel or original steel, they are styled on state-of-the-art, computer-driven CNC tube benders to match the original lines. That means that these quality pieces will install easily and fit great. Vapor lines are perfectly end-formed and assembled with fittings. Replacing or restoring is made simpler with fuel vapor lines from Classic Tube--the people bent on perfection!
( 5 )
$116.99
JE Pistons SRP 2618 Alloy Forged Pistons
JE Pistons developed the SRP Pro 2618 Series alloy forged pistons over the course of an entire year using 3D modeling with several revisions being tested using FEA (finite element analysis). These pistons offer superior strength for high boost/nitrous racing with alloy forged 2618 aluminum, featuring designs for optimal ring seal (accumulator grooves) and low friction (skirt coatings). Optimize your engine's power for maximum performance with JE Pistons SRP 2618 Series forged pistons. Key features: * Application-Specific—best suited for racing/high-performance builds * Forged using 2618 aluminum, yielding high-tensile strength needed for high-demand performance applications * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Ring groove design placement proven to maintain positive seal in high-HP, boosted applications, along with stout top land thickness for improved strength * Low-friction skirt coating reduces wear and reduces operating noise while optimizing performance * Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings * Accumulator groove helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power * Value-focused—provides premium features at a more accessible price point than ultra-high-end pistons, suitable for serious racers on a budget
( 1 )
$149.99
Classic Performance Collapsible Steering Shafts
Classic Performance collapsible steering shafts offer an added measure of safety, compared to conventional steering columns, and collapse in the event of a major front impact. They are not only a safety feature, but also are an excellent way to eliminate flex and binds in your steering shaft. The collapsible steering shafts include a universal joint, to connect to the end of the tilt steering column, and a rag joint, to connect to the top of the power steering box. Note: Not recommended for stock columns.
( 19 )
$148.99
Eagle SIR I-Beam Connecting Rods
Why spend time and money reconditioning your stock rods—when you can upgrade to a set of Eagle SIR I-Beam connecting rods for less? They're forged from 5140 steel for outstanding strength and reliability, and they come in both press-fit and bushed pin models. Their lightweight design places less stress on the rest of your rotating assembly to increase engine life and better handle high-rpm use. The rods are X-rayed, sonic-tested, magnafluxed, and shot-peened to stress-relieve the metal. They come with 12-point ARP Wave-Lok rod bolts and are weight-matched to within two grams. The big end sizing is controlled by in-house CNC equipment to ensure precise machining and accurate fitment. Order the individual rod or set recommended for your year/make and engine application.
( 90 )
$134.99
Callies Compstar Connecting Rods
Better by design, Callies Compstar connecting rods offer high performance and a trouble-free engine build. Concerns about out-of-round, big-end bore sizing, repeatability, time-saving details, and upgrade costs are a thing of the past. Their forged 4340 steel rods are put through a lengthy stress-relief process and burnishing of threads and bolt spot faces to ensure dimensional repeatability, no matter how many times rods are torn down and reassembled. Pin bushings are chamfered and honed, parting line edges are generously chamfered, and bearing locating tab slots are deburred, all in an effort to save you time and trouble. ARP 2000 bolts and stroker clearances are standard with Compstar rods. Choose either their original H-beam design or heavy-duty I-beam designed rods. For high performance use right out of the box, plus value and peace of mind, try Callies Compstar connecting rods.
( 20 )
$115.00
—
$130.00
Moser Engineering Semi-Float Custom Order Alloy Axles
These NHRA and IHRA-accepted premium alloy axles from Moser Engineering are custom-built specifically for your vehicle. They are induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier, so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. They come available with a press-fit or screw-in stud axle flange and a choice of stud diameters. Studs are not included. All Moser axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously, each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing ®. All custom-order axles are Special Order and Non-Returnable.
( 15 )
$243.00
Manley Sportmaster Steel Connecting Rods
These Manley Sportmaster connecting rods are forged from aircraft-quality 4340 steel, profiled to remove stress risers, weight-matched, and shot-peened. The result is unsurpassed performance through 750 hp.
Not Yet Reviewed
$108.02
—
$111.26
ICON Premium Forged Pistons
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 42 )
$179.54
KB Performance Pistons
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 140 )
$111.26
—
$128.20
