Availability
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 39 )
$242.99
—
$269.99
UMI Performance control arm torque box reinforcements will take care of those cracked torque boxes. If you have raced your Mustang aggressively, on slicks, or even on the street, and especially if your car is a 5-speed, you may have cracked torque boxes. Fox bodies don't have the best chassis to begin with; combine them with a V8 and some torque, and you are going to have problems. That is why control arm reinforcements or torque box reinforcements were designed to reinforce weak and cracked torque boxes.
( 18 )
$129.99
These UMI Performance tunnel brace torque arm mounts are designed to get the most out of your car. They are engineered to be stronger than the stock mount without adding excessive weight or bulk under your car. To make installation easy, UMI offers different offsets to clear the exhaust and specially designed them to bolt up to the factory location without needing to be welded in. These tunnel brace torque arm mounts are constructed from steel and are powdercoated to protect them from the harsh elements under your car. UMI Performances tunnel brace torque arm mounts are perfect to help you get your car off the line and down the track faster.
Not Yet Reviewed
$229.99
UMI Performance offers tunnel mounted torque arm relocation kits for a variety of 1982-92 GM F-Body vehicles, including Chevy Camaros and Pontiac Firebirds. These TH350 transmission mounts come with an added bushing mount to be used with UMI's tunnel-mounted torque arm. They are the same mount supplied with UMI's 2214 tunnel-mounted torque arm setup. The mounts will also work with factory T5 5-speed transmissions. This relocation kit is the best option if you already have a UPI tunnel-mounted torque arm and are doing a transmission swap. The steel crossmembers are available in a red or black powdercoat finish.
( 1 )
$219.99
UMI Performance SBC poly engine mount kits are ideal for high performance street driven vehicles. Direct bolt-in replacements for worn-out factory rubber and clamshell mounts, the polyurethane engine mounts bridge the gap between race oriented solid mounts and cruiser oriented rubber mounts. UMI Performance SBC poly engine mount kits are race-proven on the UMI Green Machine. Features and benefits: * 3/16 in. mild steel fabricated steel construction with poly insert * Polyurethane bushing for increased torque resistance over factory rubber * Less Noise/Vibration/Harshness (NVH) than solid mounts * Black powdercoat and poly bushings with zinc plated anti-crush sleeve * Includes engine side and chassis side mount * Includes all mounting hardware * Note: Sold and works as a kit only
( 10 )
$109.99
UMI Performance LSX poly engine mounts bridge the gap between factory GM rubber and UMI solid engine-side mounts. These mounts are a great choice for builders wanting a high performance mounting solution without committing to race-oriented solid units. Dimensions are based on GM 22179268, as used in the 1998-2002 GM F-Body and as seen in the UMI '99 Camaro with Pace Performance LS3. Recommended for use with: UMI 2320, 2321, 2330 and factory K members, as well as 2406 and 2410 LS swap mounts used in other platforms. Additional notes: * LSX poly engine mounts are a great choice for high performance street driven vehicles * Direct replacement for GM factory rubber engine mount 22179268 * Designed to place the engine in stock location * 3/16 in. laser-cut steel construction using US steel * Gloss black powdercoat * High-quality flanged fasteners included (torque to 45 lbs.-ft.) * Re-use factory thru bolt (not included) * Notch indicates top of mount * If solid mounts are desired, use UMI 2323 and 2328 * Polyurethane mounts balance performance and quietness
( 4 )
$139.99
UMI Performance driveshaft safety loops are NHRA-legal and will bolt-in with minimal modifications. They're a must for tracks requiring safety loops on cars running faster than 13.99 in the quarter-mile. Constructed entirely from 0.250 in. thick mild steel, the loops have CNC-machined mounting points for a superb fit, and are fully MIG-welded for outstanding strength. They are available in different styles, covering hundreds of applications from 1964 and up.
( 41 )
$169.99
UMI Performance transmission crossmembers are designed for late model F-bodies. These crossmembers are built using 0.120 in. rectangular tubing, 0.188 in. mild steel mounting plates, and a 0.375 in. thick transmission mount. These crossmembers are powdercoated bright red or gloss black and include new mounting hardware.
( 5 )
$149.99
UMI Performance single adjustable lower control arms are direct bolt-on replacements designed to minimize wheel hop and improve cornering, while lowering ETs. UMI Performance single adjustable lower control arms are constructed from a DOM mild steel tubing 1.500 in. o.d. x 0.120 in. wall and a 4130 chromoly threaded tube adapter. They are completely CNC-machined and fully TIG-welded for outstanding strength. UMI Performance single adjustable lower control arms feature reinforced spring perches and heavy-duty sway bar mounting points. Their high-quality, PTFE-lined spherical rod end allows for quiet, "bind-free" performance, making them great upgrades for both your track and autocross driven cars. The polyurethane bushings are designed to be bolted to the car chassis for quiet, comfortable operation. The control arms feature polyurethane bushings, zinc plated steel sleeves, and "on-car" greasable Zerk fittings. Additional features include: * QA1 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves * Powdercoated finish * Use OEM hardware
( 27 )
$209.99
UMI Performance rear non-adjustable upper control arms are designed to give you the best of both worlds. Whether you're a weekend cruiser or a weekend track addict, we've got you covered. While adding ride improvements, they also work great for reducing traction loss. These control arms are direct bolt-on replacements that are designed to minimize wheel hop and improve corning and track consistency. Additional features include: * Built using 1.625 in. o.d. x 0.120 in. DOM mild steel tubing * CNC-machined for precision tolerances and accuracy * Fully TIG and MIG-welded construction * Durable, long-lasting, powdercoated finish
( 41 )
$179.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
