Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Summit Racing™ Engine Travel Limiters
Summit Racing™ Engine Travel Limiters provide you an affordable complete kit to keep that engine where you mounted it. When using motor plates, the engine may try to move forwards or backwards in the chassis under hard acceleration or braking which could create binding and other problems. These travel limiters bolt to a plate on the engine block and give you a diagonal link to the frame rail that positively locates the engine to keep it from flexing the motor plates. These comes unassembled and include all necessary tabs and hardware. Welding and fabrication skills are required.
( 1 )
$110.99
Summit Racing™ Digital GM High Energy Modules with Rev Limiters
Summit Racing™ offers GM high-energy modules with rev limiters that enable you to adjust the rpm limit from 5,000 to 9,500 rpm. They are high performance modules built for HEI distributors, producing 50 percent higher coil drive currents than the stock module. This saturates the coil faster, delivering more spark energy at top speeds. Your benefits are increased horsepower and rpm range, plus improved starting. GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory or aftermarket HEI distributors.
Not Yet Reviewed
$112.99
On Sale
Summit Racing™ Multi-Spark Digital Capacitive Discharge Ignitions
Summit Racing™ multi-spark digital capacitive discharge ignition boxes use cutting-edge microprocessor controls to create hot, consistent sparks for performance throughout the powerband. These capacitive discharge systems create a powerful 100 mJ spark at full voltage, with multiple sparks below 3,000 rpm to improve starting ability, idle quality, and throttle response, while preventing plug fouling due to cylinder load-up. They have a 470V primary/45,000V secondary output, plus a built-in rev limiter-just use the rotary dials to set it anywhere from 2,000 to 9,900 rpm. The lightweight cast aluminum housing has a durable metallic silver powdercoat finish, and the ignition comes with direct plug-in connectors for most 2-wire distributors (including points and magnetic pickups), installation hardware, labeled wiring, optional Weather Pack connectors, optional vibration-resistant mounts, and detailed instructions.
( 134 )
$218.99
$197.09
On Sale
Summit Racing™ Reproduction Wiring Harnesses
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 59 )
$115.99
$104.39
Summit Racing™ Billet LS Rocker Stands
Strengthen your valvetrain using Summit Racing™ billet LS rocker stands. Our bars are stouter than factory, and are precision-cut from billet aluminum, helping to limit flex and distortion. Get assistance with rocker arm control; choose a set of Summit Racing™ LS rocker stands for your valvetrain.
( 6 )
$102.99
Summit Racing Equipment® Giant Camping Chair
Wouldn't it be great to feel like a "king" for a day?! Sit yourself in this giant camping chair from Summit Racing Equipment® and rule your kingdom in comfort and style! This folding chair has a powdercoated steel frame with a UV-water-resistant canvas construction. It also features a removable 12-can cooler and six mesh cup holders—that's right—six! This folding chair measures: 31 in. W x 38 in. D x 66 in. tall, and has a 400 lb. weight capacity limit.
( 22 )
$100.99
Summit Racing™ Narrow Universal X-Pipe Kits
Ideal for applications where space is limited, these Summit Racing™ narrow universal X-pipe kits are made of top-quality materials with a top-quality finish. These kits are offered in a choice of sizes to suit your needs.
( 14 )
$112.99
—
$120.99
Summit Racing™ Laser Etched Sockets
Easily tighten fasteners, nuts, and bolts with Summit Racing™ laser-etched sockets. Each socket with laser-etched markings offers easy-to-read sizes, offered in your choice of various SAE (standard) or metric sizes (or combo)—which makes it a snap to find just the right socket to help complete the task at hand. These sockets are made of vanadium steel and black EDP coated for corrosion resistance. They're available in complete sets (from 11- to 166-piece), without any skipped sizes, and include a plastic case. Summit Racing™ laser-etched sockets are backed by a limited lifetime warranty.
( 64 )
$180.94
—
$244.91
Summit Racing™ Turbo Flex Couplers
Summit Racing™ Turbo Flex Couplers are stainless steel couplers designed to isolate flexing, expansion and engine vibration from your exhaust components. Limiting vibration and expansion will help prevent cracks in your headers, turbo manifolds, downpipes, as well as the rest of the exhaust system. Our couplers are built with an interlock liner that is compatible on boosted applications and can flex in multiple directions.
( 13 )
$113.99
Summit Racing™ Loading Ramps
Every rider deserves a ramp that makes it easy to safely load their motorcycle or ATV onto a truck, flatbed, or trailer for transport—and our Summit Racing™ loading ramps are just the way to do it! Manufactured from lightweight aluminum, these quality ramps are durable, corrosion-resistant, and easy to set up and use. They're available in a variety of lengths, widths, and weight limits, sold individually or as a pair.
( 1 )
$180.99
Summit Racing™ Heat Shields
Summit Racing™ heat shields are ideally suited for heat protection in the space-limited firewall, under vehicle, exhaust path areas, or to wrap certain engine components. These self-adhesive shields measure only 0.24 inches thick and are able to handle up to 1,000 degrees F ambient temperature. They're available in natural aluminum or painted in a high-temperature black coating. Summit Racing™ heat shields can provide a remarkable decrease in protected surface temperatures--and may reduce noise, as well.
( 24 )
$106.99
—
$158.99
Summit Racing™ Extreme Performance Coated Brake Rotors
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 70 )
$159.98
On Sale
Summit Racing™ Electronic Distributor Conversion Kit
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 14 )
$167.99
$151.19
Summit Racing™ 4 in. Oval Step Bars
Summit Racing™ 4 in. oval step bars offer easy installation, strength, and great style to complete the look of your truck. These oval-shaped tube steps are corrosion-resistant, feature fully welded capped ends for a finished look, and are fitted with UV-resistant step pads for added safety entering and exiting your rig. Available in your choice of polished stainless steel or black powdercoated mild steel, the step bars bolt on with the included mounting brackets—no drilling is required! Order the pair recommended to fit your vehicle.
( 73 )
$124.09
—
$219.99
On Sale
Summit Racing™ Blueprinted HEI Distributors
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1245 )
$247.99
—
$269.99
$223.19
—
$242.99
On Sale
Summit Racing™ Loaded Strut Assemblies
Buick, Chevy, Chrysler, or Dodge—whatever type of vehicle you drive, Summit Racing™ has just the right suspension components, including these loaded strut assemblies. They're application-engineered to your vehicle's unique riding and handling characteristics for better suspension performance. Hundreds of models are available, for fitment on vehicles from the 1980s and up. Summit Racing™ loaded strut assembly features: * Twin-tube, nitrogen-charged design for better performance * Consistent robotic TIG welds * High-range -45 to +450 degree grease applied to all bearings * Strut rod nuts are torqued to OE specs and retain the OE spring compression * Phosphate finished and painted for corrosion resistance * Chrome plated pistons for added life * Neoprene strut boots included * Rubber seat and bumper meet or exceed OEM specifications * High-quality NOK seals * Every unit is put through a 300,000-cycle durability test
( 274 )
$111.99
—
$146.99
Summit Racing™ Engine Oil Change Kits
Summit Racing™ offers engine oil change kits for hundreds of foreign and domestic vehicles. The combo kits include 5 to 10 quarts (depending on selection) of a Mobil Advanced full-synthetic motor oil, the official blend of NASCAR. It protects your engine for up to 10,000 miles. Each kit also includes an oil filter. Maintain your late model car, truck, van, or Jeep with a complete lubrication solution from Summit Racing™.
( 18 )
$105.91
Summit Racing™ Step Bars
Don't think you can get quality, heavy-duty step bars at a reasonable price? Think again. Our Summit Racing™ step bars deliver durable construction and attractive styling at an amazingly affordable price. They're available with a polished, or black powdercoated finish (depending on the application). Summit Racing™ step bars feature recessed step pads to provide sure footing, and an easy, no-drill installation.
( 182 )
$101.99
—
$160.99
Summit Racing™ AlumaRally Wheels
Add that classic rally wheel look to your ride with our Summit Racing™ AlumaRally wheels. Unlike your old steel rally wheels, these are made of a high-quality, one piece aluminum construction and are available in 15"-20" diameters.
( 11 )
$220.99
Summit Racing™ Race Series Main Bearing Sets
Summit Racing™ offers Race Series main bearing sets for a wide range of applications—including many Chevrolet, Ford, Chrysler, Dodge, Jeep, Ram small block, big block, and Hemi engines from the early 1960s and up. Main bearings hold the crankshaft in place and allow it to rotate within the engine block. These performance replacements are machined from tri-metal copper-lead alloy, and are available in numerous upper/lower groove styles and engine crankshaft undersize options. Order the set recommended for your vehicle.
( 8 )
$117.99
Summit Racing™ Mini Spools
Machined on state-of-the-art CNC machines from 1045 chromoly steel, Summit Racing™ mini spools will take racing abuse. They replace the side and spider gears in your factory open differential carrier and lock your axles together for positive traction, making them perfect for Circle Track racing. Summit Racing™ mini spools are recommended for dirt track use only.
( 33 )
$104.99
