Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
OTC Master Brake Flaring Tool Kits
OTC Master brake flaring tool kits cover single, double, and bubble-type flares. The kits contain a flaring bar, arbor press, adapters, a tube cutter, and a deburring tool. The components come packaged in a sturdy, hard carrying case. Flare standard and metric lines with OTC Master kits.
( 25 )
$124.99
OTC Ford Crankshaft Positioning Tools
Avoid jumped time engines with OTC Ford crankshaft positioning tools. These OTC positioning tools install over the crank and engine front cover and align the dowel to position the crankshaft at top dead center, allowing proper positioning for timing chain installation.
( 9 )
$107.99
—
$140.99
OTC Ford Modular 4-Valve Cam Tool Kits
Camshaft position is critical in today's engines. These OTC camshaft alignment tools prevent the camshaft from moving and are necessary for performing valvetrain service. They come available for multiple applications.
( 14 )
$200.99
OTC Stinger Harmonic Balancer Puller/Installer Sets
OTC Stinger harmonic balancer puller/installer sets save you time and frustration when you're installing and removing balancers. These sets allow you to drive pulleys that are press-fitted on the crankshaft. OTC includes a bearing-centered circular 2/3-way puller flange and an assortment of adapters that cover a wide range of applications. A storage case keeps the set contents organized and protected from loss.
( 23 )
$160.99
OTC U-joint Removing/Installing Tools
OTC's screw press is used to remove and replace automotive universal joints with needle bearings, including GM plastic pin CV U-joints. The OTC press can also be used to replace truck brake anchor pins.
( 12 )
$137.99
—
$226.99
OTC Ford Truck Torsion Bar Tools
The folks at OTC manufactured these tools with safety in mind. OTC's Ford truck torsion bar tools firmly hold the torsion bar on while you adjust or service the front suspension. Without these tools, a torsion bar could unwind and possibly cause damage.
( 8 )
$103.99
OTC High-Lift Transmission Jack Replacement Casters
OTC high-lift transmission jack replacement casters save you the expense of having to replace your entire high-lift jack by just repairing or replacing the damaged or missing part to maintain optimum operation when needed. Sold as a set of four, these replacement casters provide the same quality and durability as the original component. For service solutions to meet your needs, you can put your trust the brand that stands for quality—OTC Tools.
Not Yet Reviewed
$136.99
OTC GM Torsion Bar Unloading Tools
These OTC torsion bar unloading tools are manufactured with a larger C-frame opening to be used on trucks with heavy-duty chassis and larger torsion bars. The OTC GM torsion bar unloading tools hold the torsion bar while you make the adjustments.
( 15 )
$111.99
—
$149.99
OTC Injector Rail Assembly Removers
OTC injector rail assembly removers are used for removal of the direct injection fuel rail without damaging the unit. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly. OTC injector rail assembly removers include the remover, stud adapter, and L-hook and are specific to 2007-14 General Motors Direct Injection engines.
Not Yet Reviewed
$192.99
OTC Acura/Honda Ball Joint Adapter Sets
OTC ball joint adapter sets are made from durable materials to ensure years of performance. These service kits are designed for use in conjunction with the OTC 7248 C-frame tool to remove and install ball joints on Acura and Honda® vehicles. They are designed to work with the following applications: * Acura TL 2009-2014 * Acura TSX 2009-14 * Honda® Accord 2010-11 * Honda® Accord Crosstour 2010-11 * Honda® Crosstour 2012-14
Not Yet Reviewed
$152.99
OTC Flywheel Holders
OTC flywheel holders are specialty tools that mount in place of the starter and engage the flywheel ring gear teeth. They hold the flywheel/engine stationary during removal of the hub bolt which must be removed to service the pulley assembly.
( 1 )
$129.99
OTC Slack Adjuster Pullers
OTC slack adjuster pullers will yank even the most corroded slack adjusters off the S-cam. If you're still using the "heat and beat" method to get the job done, it's time for a change. OTC offers pullers for both manual and automatic adjusters, and both are designed to do the job in just a fraction of the time of your old method. They will not damage components and feature rugged forcing screws and cast steel bodies.
Not Yet Reviewed
$137.99
OTC Cone Type Pullers
OTC's cone type puller will work on both internal and external jobs. The two and three way head permits assembly of the puller to suit the job at hand.
Not Yet Reviewed
$140.99
—
$200.99
OTC GM Crankshaft Balancer Puller Kit and Adapter Sets
OTC GM crankshaft balancer puller and adapter kits will give you everything you need to pull balancers with three tapered holes. The OTC shoulder bolts are designed to prevent being installed too deeply, protecting the crank sensor interrupter rings from damage. The spacer adapter gives the pullers forcing screw something to push against. These OTC kits fits on 1990-2002 3.3 and 3.8L engines.
Not Yet Reviewed
$141.99
OTC Ball Joint Adapter Sets
OTC ball joint adapter sets' sturdy steel-constructed components provide easy removal and installation of the lower ball joint in specific Ford vehicle applications. These adapters allow for the replacement of the lower ball joint without having to replace the entire spindle assembly, saving time on manual labor.
Not Yet Reviewed
$138.99
OTC Fuel Injector Pullers
OTC fuel injector pullers thread onto slide hammers with 5/8 in.-18 thread, including most OTC slide hammers, to easily remove fuel injectors from an engine. Simple to use, the puller legs align around the injector base and the collar is slid down to firmly grip the injector. Attach your slide hammer to the puller to pull the injector from its seat.
Not Yet Reviewed
$156.99
OTC Ford Transit Ball Joint Adapter Sets
OTC ball joint adapter sets are made from durable materials to ensure years of performance. These service kits are designed for use in conjunction with the OTC 7248 C-frame tool to remove and install ball joints on 2010-13 Ford Transit Connect vans.
Not Yet Reviewed
$241.99
OTC Injector Seal Installer and Sizer Adapters
OTC injector seal installer and sizer adapters ensure replacement injectors and seals are installed correctly. Two different kits are available. Choose the appropriate one for your application. OTC kit 6757 installs the PTFE seal onto the end of the injector. The pilot cone is placed onto the end of the injector and the seal is started over the cone. The installer pushes the seal into the groove on the injector tip. The sizer goes over the seal to compress it back to the correct O.D. to allow installation into the cylinder head. OTC kit 6756 installs the dual seals onto the end of the injector. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head. Two seal installation pilots for each groove, a seal installer driver, and a compression sizer is included.
Not Yet Reviewed
$158.99
—
$179.99
OTC Supply Line Removal Tools
OTC supply line removal tools are specialty fuel tools to make your job easier. They remove high-pressure fuel supply tube. Need an assist? Let OTC supply line removal tools help you out.
Not Yet Reviewed
$126.99
OTC Mechanical Grip-O-Matic Pullers
OTC offers the most complete line of pullers allowing you to get the job done in a timely fashion. OTC's pullers are forged from quality steel and subjected to rigorous tests which exceed their rated capacity. Available in multiple sizes.
( 4 )
$113.99
—
$184.99
OTC Hub Seal Installation Tools
OTC hub seal installation tools ease the frustration of getting your hub seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your axle hub with the right tools—OTC hub seal installation tools.
Not Yet Reviewed
$157.99
OTC Camshaft Alignment Tools
Camshaft position is critical in today's engines. OTC offers dozens of camshaft alignment tools designed to help prevent the camshaft from moving. Many of these tools are necessary for performing valvetrain service. Order the model recommended for your engine application.
( 19 )
$106.99
—
$142.99
OTC Heavy-Duty Transmission Output Shaft End Yoke Removers
OTC transmission output shaft end yoke removers are one of the specialty tools you may not need every day, but when you do need one, you'll be glad to have it in your tool arsenal. Their heavy-duty construction offers a long service life to properly remove driveshaft yokes.
( 2 )
$129.99
OTC 4WD Ball Joint Service KIts
OTC 4WD ball joint service kits are made from durable materials to ensure years of performance. These kits are designed for OTC ball joint service kit part numbers 6530, 7248, and 7249. These OTC tools, along with the previous OTC part numbers listed, will allow you to remove and install upper and lower ball joints on trucks built from 1967 to mid-1992 with Dana 44 front axles.
( 2 )
$108.99
