Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Go Fast Bits DV Plus Range with Direct-Fit Performance Diverters
Go Fast Bits offers DV Plus Range with Direct-Fit Performance Diverters for a wide range of domestic and import vehicles. GFB's DV+ solution couldn't be simpler: keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great—the ECU opens it faster than any pneumatic valve, so why replace it? The weak point, however, is the valve mechanism itself. GFB's DV+ solves this problem by replacing the valve parts with an anodized billet aluminum housing, fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, or include a solenoid valve with the diverter. These approaches add unnecessary cost and additional parts (in some cases requiring long vacuum hose runs, mounting brackets, etc.). All these additional items result in a product that is slower, less responsive, more expensive, and takes longer to install. GFB's DV+ solution, on the other hand, is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Oh, and it doesn't require different springs or frequent re-builds, either. Order the model recommended for your vehicle.
( 1 )
$153.90
Go Fast Bits DV Plus Diverter Valves with TMS Advantage
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$153.90
—
$173.70
Go Fast Bits Hybrid Dual Outlet Valves
The Hybrid valve is back! Go Fast Bits Hybrid dual outlet valves are three valves in one; full recirculation, full atmosphere, or 50/50 venting. In 1999, GFB's first Hybrid valve pioneered the dual port design, which was so successful, and the technology has since been adopted by most other brands. By "staging" the two venting outlets at low valve lifts most of the air is recirculated. As the car is driven harder, the valve opens further and more of the atmosphere venting port is exposed for a louder sound--a benefit that makes it possible to use these valves on cars with sensitive airflow meters that often suffer issues such as backfiring and/or stalling, whilst still achieving the signature blow-off sound. Go Fast Bits Hybrid dual outlet valves are direct-fit, bolt-ons with a range that covers a huge list of popular vehicles. Purchase the Hybrid model for your vehicle.
( 2 )
$234.81
Go Fast Bits VTA Performance Blow-Off Valves
Go Fast Bits VTAs are a performance blow-off valve solution for a wide range of foreign and domestic cars and trucks with an electronic factory diverter valve. If you want sound with your performance (or performance with your sound!), these VTAs offer just that! By combining the proven performance benefits of GFB's ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: "Keep what works, replace what doesn't." This means Go Fast Bits retained ECU control and the solenoid from the factory diverter to ensure the fastest possible response time—without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism; this is the part GFB has replaced. The VTA features CNC-machined billet components that last a lifetime, and the valve operation method has been updated for better performance. The factory diverter valve can only operate in two states: open or closed. When it opens fully at low boost or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of "pilot operation" in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It's this design philosophy that makes the VTA not only the best performing blow-off valve solution, but also the best value on the market. Order the VTA Performance blow-off valve model recommended for your vehicle. Key features: * TMS Technology for faster boost recovery on gear shift and during throttle modulation * Improved boost holding ability * Atmosphere venting for blow-off sound * Retains ECU control * Simple, direct bolt-on kits include everything you need to install
( 5 )
$206.55
Go Fast Bits Mach 2 TMS Recirculating Diverter Valves
Go Fast Bits offers Mach 2 TMS Recirculating Diverter Valves for a variety of vehicles. It's the simple and essential modification for 30 percent quicker boost—utilizing proven TMS (Turbo Management System) technology to ensure dependable boost holding and optimum throttle response. If you don't need the patented venting bias adjustment feature of the Respons or Deceptor Pro, the Mach 2 is your answer. It's configured as a 100 percent recirculating valve (i.e. bypass, plumb back), and add-on kits are also available to convert to 100 percent atmosphere venting. Use the recirc model for direct factory replacement when you want the performance without the noise—or add the conversion kit when you want some noise with your performance! Factory bypass valves have two main shortcomings: they're typically designed to start opening above a certain pressure to protect the engine, and they're not optimized for throttle response. And you can't vent them to atmosphere without stalling your engine. The Mach 2 solves all of these issues. It can effectively hold unlimited boost (unlimited in that no turbo could ever produce enough pressure to damage it), and the TMS technology ensures maximum throttle response. And you CAN vent with the atmo conversion to atmosphere without stalling your engine. Product notes: * Recirculation model for direct factory replacement for performance without the noise * Atmosphere venting kits to convert the recirculating valve if you want noise with your performance * Like the Respons and Deceptor Pro II, the Mach 2 is available in a range of bolt-on kits for most popular turbo models * No additional adaptors, parts or vehicle modifications are required—simply remove the factory bypass valve and replace it with the Mach 2; it's that simple!
( 2 )
$180.45
Go Fast Bits FX-S Fuel Pressure Regulators
The FX-S Series fuel pressure regulators from Go Fast Bits join their existing line of successful fuel delivery products—built with the same precision, machining quality, and reliability that is the foundation of GFB's reputation. Go Fast Bits FX-S fuel pressure regulators are available in different model configurations to meet the needs of your specific setup. The 8050 models have multiple inlet/gauge ports that allow for a wide range of fuel system setups beyond the usual inlet/outlet, including parallel fuel rail or returnless "deadhead" systems. The two gauge ports allow you to run a mechanical fuel pressure gauge and an ECU fuel pressure sensor if you want. GFB also offers the 8051 model—a direct drop-in Bosch replacement for common Bosch regulators that clip into the fuel rail, rather than replacing the entire fuel rail or using an adaptor with a separate fuel pressure regulator. By simply clipping in the FX-S 8051 fuel pressure regulator will allow you to run a much larger pump setup even with the factory rail. Whether you run pump petrol/gasoline, Ethanol, Methanol or Diesel—Go Fast Bits has you covered—no matter what your fuel pressure regulatory requirements are! Features of FX-S Series fuel pressure regulators: * Billet aluminum construction with black anodized finish * Features double-layer diaphragm that has twice the reinforcing material of the single layer type used in most regulators * Valve seat has a soft, more compliant yet resilient material that positively seals and holds fuel pressure for easier startup vs. conventional aftermarket fuel pressure regulators that utilize metal-to-metal valve and seat * PTFE co-polymer seat with spherical stainless valve retains fuel pressure longer after shutdown * Spring pre-load adjustment screw is O-ring sealed and does not leak vacuum/boost * Completely serviceable
( 2 )
$229.95
