Availability
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$227.95
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$281.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$216.95
Edelbrock Victor tunnel ram top is for use with 4500 series carburetors and their Victor Tunnel Ram base manifolds only. They are designed with larger openings to accommodate throttle bore sizes up to 2.31 in. without modification and are wider to accommodate the larger runners in the new manifolds. Carburetors will need to be mounted sideways in order to clear the manifold.
Not Yet Reviewed
$270.95
On Sale
These Edelbrock Victor Ram tunnel ram tops are designed to fit the Victor Ram manifold base. They are made of aluminum and come available in natural or polished finishes. Edelbrock Victor Ram tunnel ram tops are available for dual inline standard square-flange carburetors or dual sideways-mounted Dominator carburetors. A gasket is included, making your installation simple.
Not Yet Reviewed
$201.95
$161.56
These fiber laminate spacers for Edelbrock manifolds provide heat insulation between our upper and lower manifolds for a cooler charge and more power. They also raise the upper manifold for increased valve cover clearance.
( 2 )
$127.95
—
$191.95
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 454 )
$133.95
—
$257.95
Are you having problems with your new intake accepting your throttle body? Edelbrock throttle body adapters allow you to use either your stock or aftermarket throttle body on Edelbrock intake manifolds.
( 1 )
$230.95
Edelbrock carbureted intake manifold valley plates are designed with an integrated water passage which eliminates the need for external plumbing when used with most 13-18 degree cylinder heads and spider-style intake manifolds. They allow you to retain stock water passage connections on the block without the need for any modifications. The plates are a great way to manage water distribution without the hassle of fabricating hose and fittings. Edelbrock carbureted intake manifold valley plates are available in two types--the machined plates are designed for standard applications and will retain the stock distributor location and angle, and the other plates retain over 0.500 in. more material on the flange and end rails, allowing for custom machining on tall deck applications and eliminating the need for spacers.
Not Yet Reviewed
$124.95
Bring back the performance of your Q-jet the easy way with these genuine Edelbrock replacement carburetor accessories. They're designed to provide a care-free installation and to help you to restore superior performance without breaking the bank.
( 7 )
$142.95
These carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
( 206 )
$106.95
—
$119.95
These Edelbrock head gasket sets include everything you need to install Edelbrock Performer and Performer RPM aluminum heads. These sets include intake, exhaust, head, waterneck, distributor and valve cover gaskets.
( 35 )
$109.95
—
$212.95
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$137.95
—
$274.95
These Edelbrock throttle body intake elbows are designed using the latest technology for unbeatable flow and performance. They adapt GM LS1, LS2, and Ford 5.0L based throttle bodies to EFI intake manifolds with a traditional square bore, 4150 type, mounting flange. Edelbrock throttle body intake elbows are available in standard or box-style configurations to fit a wide variety of engine and hood combinations. Cast from high-quality aluminum, the throttle body elbows feature several bore inlet sizes with your choice of natural or black powdercoated finishes.
( 14 )
$183.95
—
$248.95
Edelbrock Super Victor LS3 fuel rail kits are specifically designed to be used with your Super Victor LS3 manifold to give your ride its peak performance. These kits are ideal for helping you build a 700 hp and higher carbureted or EFI large-displacement racing engine, operating between 3,500 and 7,500 rpm. They are exactly what you need when working on nitrous or forced induction applications. So, if you're working on making the perfect LS3 race engine, Edelbrock Super Victor LS3 fuel rail kits are must-haves.
Not Yet Reviewed
$296.95
Are you looking for quality fuel lines for your dual-quad setup? These dual-quad fuel line kits from Edelbrock feature two ports to supply fuel to two Edelbrock carbs when used with a dual-quad intake manifold.
( 22 )
$113.95
—
$114.95
Keep your Pro-Flo multi-point EFI systems performing their best with Edelbrock MAP sensors. These Manifold Absolute Pressure sensors are made with high-quality components for durability and dependability, and will have a role in making sure that your engine is fed the right mixture of fuel and air. Hold on to performance by making sure that your ride's computer is getting the right signals with Edelbrock MAP sensors.
( 5 )
$120.95
—
$128.95
These Edelbrock in-tank electric fuel pumps are designed to support performance upgrades to the intake manifold, camshafts, direct port nitrous systems, bigger throttle bodies, and more. They include all necessary mounting hardware and require no modifications to your vehicle.
( 6 )
$200.95
—
$232.95
Edelbrock Victor Tunnel Ram fuel rail kits are specifically designed for their Victor Series Tunnel Ram manifolds. They feature a new and improved design with 5.5 sq. in. at the plenum, making them 25 percent larger. They are the ideal fuel rail kits to use with any modern high-horsepower demanding application. Edelbrock Victor Tunnel Ram fuel rail kits are constructed from superior-quality aluminum for long-lasting durability and performance and are anodized black for a beautiful finish.
Not Yet Reviewed
$224.95
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 181 )
$196.95
Edelbrock Racing diecast aluminum valve covers are perfect for high performance street or all-out race engines. They are lightweight, high-strength, diecast aluminum and provide ample clearance for all popular valvetrains on most cylinder heads. Some versions are available with logos and multiple finishes.
( 32 )
$205.95
Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.
( 600 )
$121.95
These Edelbrock water bypass kits will allow water to flow through the thermostat and out of the bypass spacer without going into the upper radiator hose. They include the cast aluminum bypass spacer, gasket, blue anodized fittings, and -6AN braided stainless steel hoses.
( 2 )
$143.95
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock's popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or musclecar. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications, as well as a coordinated appearance with the classic finned look. Classic Series air cleaners are available in a polished aluminum or durable black powdercoated finish. They come with a medical-grade, pre-oiled cotton gauze element for excellent filtration.
( 42 )
$244.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
