Availability
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$227.95
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$281.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$216.95
Edelbrock Victor tunnel ram top is for use with 4500 series carburetors and their Victor Tunnel Ram base manifolds only. They are designed with larger openings to accommodate throttle bore sizes up to 2.31 in. without modification and are wider to accommodate the larger runners in the new manifolds. Carburetors will need to be mounted sideways in order to clear the manifold.
Not Yet Reviewed
$270.95
On Sale
These Edelbrock Victor Ram tunnel ram tops are designed to fit the Victor Ram manifold base. They are made of aluminum and come available in natural or polished finishes. Edelbrock Victor Ram tunnel ram tops are available for dual inline standard square-flange carburetors or dual sideways-mounted Dominator carburetors. A gasket is included, making your installation simple.
Not Yet Reviewed
$201.95
$161.56
These Edelbrock throttle body intake elbows are designed using the latest technology for unbeatable flow and performance. They adapt GM LS1, LS2, and Ford 5.0L based throttle bodies to EFI intake manifolds with a traditional square bore, 4150 type, mounting flange. Edelbrock throttle body intake elbows are available in standard or box-style configurations to fit a wide variety of engine and hood combinations. Cast from high-quality aluminum, the throttle body elbows feature several bore inlet sizes with your choice of natural or black powdercoated finishes.
( 14 )
$183.95
—
$248.95
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 454 )
$133.95
—
$257.95
These fiber laminate spacers for Edelbrock manifolds provide heat insulation between our upper and lower manifolds for a cooler charge and more power. They also raise the upper manifold for increased valve cover clearance.
( 2 )
$127.95
—
$191.95
Edelbrock carbureted intake manifold valley plates are designed with an integrated water passage which eliminates the need for external plumbing when used with most 13-18 degree cylinder heads and spider-style intake manifolds. They allow you to retain stock water passage connections on the block without the need for any modifications. The plates are a great way to manage water distribution without the hassle of fabricating hose and fittings. Edelbrock carbureted intake manifold valley plates are available in two types--the machined plates are designed for standard applications and will retain the stock distributor location and angle, and the other plates retain over 0.500 in. more material on the flange and end rails, allowing for custom machining on tall deck applications and eliminating the need for spacers.
Not Yet Reviewed
$124.95
These Edelbrock head gasket sets include everything you need to install Edelbrock Performer and Performer RPM aluminum heads. These sets include intake, exhaust, head, waterneck, distributor and valve cover gaskets.
( 35 )
$109.95
—
$212.95
Don't cut corners when it's time for valves. Get genuine Edelbrock stainless steel valves. They're made from a tough, stainless steel alloy and are carefully designed to increase gas flow for more power. What's more, they have hardened stem tips for durability and are swirl-polished.
( 24 )
$159.95
—
$256.95
Edelbrock flathead top-end gasket sets provide the best sealing solution—and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry-leading head gasket manufacturers to ensure their head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. These gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torquing. Order the set recommended for fitment with your year/make and engine application.
Not Yet Reviewed
$193.95
—
$276.95
Are you looking for quality fuel lines for your dual-quad setup? These dual-quad fuel line kits from Edelbrock feature two ports to supply fuel to two Edelbrock carbs when used with a dual-quad intake manifold.
( 22 )
$113.95
—
$114.95
These carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
( 206 )
$106.95
—
$119.95
These Edelbrock in-tank electric fuel pumps are designed to support performance upgrades to the intake manifold, camshafts, direct port nitrous systems, bigger throttle bodies, and more. They include all necessary mounting hardware and require no modifications to your vehicle.
( 6 )
$200.95
—
$232.95
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete with gaskets and bolts.
( 7 )
$102.95
—
$125.95
Are you having problems with your new intake accepting your throttle body? Edelbrock throttle body adapters allow you to use either your stock or aftermarket throttle body on Edelbrock intake manifolds.
( 1 )
$230.95
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$207.95
—
$274.95
Finish off your engine with these quality Edelbrock Classic cast aluminum valve covers. The covers are made from heavy-gauge, sand cast aluminum with a polished, black, or EnduraShine finish and have a timeless ridged design. No Edelbrock part would be complete without the vintage logo topping it off. It's no wonder that these covers have been popular since the late '50s.
( 49 )
$291.95
Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.
( 600 )
$121.95
Bring back the performance of your Q-jet the easy way with these genuine Edelbrock replacement carburetor accessories. They're designed to provide a care-free installation and to help you to restore superior performance without breaking the bank.
( 7 )
$142.95
These Edelbrock water bypass kits will allow water to flow through the thermostat and out of the bypass spacer without going into the upper radiator hose. They include the cast aluminum bypass spacer, gasket, blue anodized fittings, and -6AN braided stainless steel hoses.
( 2 )
$143.95
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock's popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or musclecar. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications, as well as a coordinated appearance with the classic finned look. Classic Series air cleaners are available in a polished aluminum or durable black powdercoated finish. They come with a medical-grade, pre-oiled cotton gauze element for excellent filtration.
( 42 )
$244.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
