Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
COMP Cams Valve Springs
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 253 )
$102.95
—
$237.95
COMP Cams Magnum Pushrods
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 459 )
$119.95
—
$200.95
COMP Cams Camshaft Phaser Limiter Kits
COMP Cams camshaft phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm. The engine oil is pressure fed to the phasers through passageways in the cylinder heads and cams. The engine computer's control solenoids that adjust this oil flow into and out of the phasers' control chambers, give the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap.
( 2 )
$120.95
COMP Cams Steel Valve Spring Retainers
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 167 )
$110.95
—
$245.95
COMP Cams Engine Break-In Oil Additive
COMP Cams Engine Break-In Oil Additive provides the good stuff, delivering a specially engineered blend of extreme pressure break-in ingredients that have been removed from current off-the-shelf motor oils. Delivering added protection during the break-in process (and beyond) for all the moving parts in your new or rebuilt engine, it's compatible with any petroleum, synthetic, or blended motor oil. Don't ruin your engine before you have fun with it, order COMP Cams Engine Break-In Oil Additive. Product features: * Improve surface mating of rotating assembly, rod journals, piston rings, valve guides, cam and lifters, etc. * Protect all internal engine components, including both flat tappet and roller valve trains * Proprietary additive package includes optimum amounts of ZDDP (Zinc and Phosphorus), Molybdenum, and detergents * Requires no additives or supplements for maximum protection * Compatible with gasoline, methanol, and high octane race fuels
( 261 )
$162.95
COMP Cams Hi-Tech Pushrods
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$108.95
—
$248.95
COMP Cams Ultra Gold ARC Series Aluminum Rocker Arms
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 114 )
$232.95
COMP Cams Lifter Bore Grooving Tools
Developed by one of NASCAR's top engine builders, COMP Cams lifter bore grooving tools precisely groove your lifter bores to ensure that pressure fed oil is directly injected into the contact area between lifter and camshaft. This increased oiling significantly reduces wear on the camshaft and lifters, and minimizes the risk of premature failure during break-in. This machining operation to the block is quick, easy, inexpensive, and the best insurance for a new camshaft. The replaceable carbon cutters are available separately. Tools come complete with cutter and handle.
( 8 )
$199.95
—
$223.95
COMP Cams DynoSim6 Engine-Dyno Simulation with Wave Action Pro-Tools
COMP Cams DynoSim6 software is a highly refined engine simulation that considerably reduces the cost and time of engine development and testing. With better accuracy, many new features, and Fully Windows compatible, this version 6 software has been rewritten to include wave-dynamics tuning aspects and is so intuitive, you will be building horsepower in minutes. Put DynoSim6 engine-dyno simulation with Wave Action Pro-Tools to work for you, and get the most from your next engine build. Some of the DynoSim6 software features and benefits: * Direct-Click interface lets you select any engine component on the left side of the screen, change any specs, then view the simulation results on the right * Three wave-dynamic displays let you "see inside" your running engine * Determine, at a glance, intake and exhaust pressures, charge flow, and of course power, torque, VE, airflow, valve lift, and much more * Locate and minimize intake reversion, correct miss-timed exhaust pulses, locate flow restrictions, and more * Advanced forced-induction modeling * "Fitter" math routines ensure exacting valve motion and improve simulation accuracy * QuickIterator provides fast one-button testing
( 4 )
$238.95
COMP Cams Sportsman Solid Roller Lifters
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$154.95
—
$233.95
COMP Cams Magnum Rocker Arm Studs
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$129.95
COMP Cams Valve Spring Locators
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 76 )
$125.95
—
$135.95
COMP Cams Race Valve Locks
COMP Cams race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, COMP Cams Race valve locks will provide the reliability that you've been looking for.
( 30 )
$178.95
—
$249.95
COMP Cams Cam Phaser Limiter Kits
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$109.95
—
$162.95
COMP Cams Bronze Distributor Gears
Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.
( 39 )
$117.95
COMP Cams Shaft Mount Valve Spring Compressors
You know what a chore it can be to remove high-pressure valve springs with shaft mounted rocker arms. Remove and install valve springs the safe and correct way with COMP Cams shaft mount valve spring compressors. They are designed to facilitate valve spring removal on heads with shaft mounted rockers while the cylinder heads are still on the engine.
( 24 )
$159.95
—
$231.95
COMP Cams High Energy Diecast Aluminum Rocker Arms
Finally, you can get high performance without a high price with COMP Cams High Energy diecast aluminum rocker arms. COMP Cams is a leader in valvetrain technology and has developed these High Energy rockers to provide a superior strength to weight ratio to withstand the hardships of your street performance and mild race engines, while adding valve lift. These diecast aluminum, larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you're on a budget, or maybe you just appreciate getting the most for your coin; make an affordable choice without sacrificing performance--get COMP Cams High Energy diecast aluminum rocker arms.
( 222 )
$249.95
COMP Cams Magnum Roller Tip Rocker Arms
One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.
( 290 )
$217.95
COMP Cams Composite Distributor Gears
COMP Cams composite distributor gears are manufactured from carbon ultra-poly composite to ensure superior strength and less wear. They're the latest in high-tech distributor gears designed around solving the wear issues associated with bronze gears in racing applications. The polymer gears are ideal for street roller applications--they feature virtually no wear, and they eliminate the problem of spark scatter associated with worn bronze gears. Composite gears have undergone stringent testing in various applications with positive results.
( 67 )
$151.95
—
$164.95
COMP Cams High Energy Rocker Arms
High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.
( 28 )
$216.95
