Availability
Showing In Stock Items. Show All 16 Items.
PerTronix's primary ignition wire extension kits can be used to increase the wire length of its electronic point conversion kits or distributors. Each kit features 39 in. of 20-gauge ultra-flexible silicone jacketed red and black wire (rated at 300 degrees F), ring terminals, quick-disconnect insulated male and female terminals, and shrink tubing. All necessary hardware is included for simple installation.
( 2 )
$11.96
Breaker point ignition systems were, until the advent of electronic ignition systems, used on millions of engines. ACDelco Gold distributor points allow you to replace worn out points with premium aftermarket quality that offers the ideal fit and performance. Replace them with top quality materials from ACDelco Gold--so you know they'll fit and last.
( 12 )
$18.99
—
$19.99
Ram Mounts Mirror-Mates are the ideal mounting point for your lightweight electronics. Ram is now offering a mirror adapter with a ball that not only looks amazing, but will perform beyond expectations. Simply remove your factory mirror, slide the Mirror-Mate adapters over the factory windscreen button, and tighten them in place. This great little product replicates the factory button on the cab facing side so you can easily reattach your factory mirror. The form and function of the Ram Mounts Mirror-Mates are ideally suited for the mounting of GPS devices, rear-view camera displays, radar detectors, cell phones, and so much more. Adapters are available for attaching to OEM buttons found on GM, Ford, Toyota, Chrysler, and Dodge vehicles.
( 1 )
$17.49
Whether you're rigging a kayak, boat, or UTV, the RAILBLAZA G-Hold 50 mounts will keep your larger gear locked-in and ready to go—without zip ties or makeshift straps. Designed to secure paddles, landing nets, boat hooks, spear guns, and just about anything with a diameter up to 50mm, these heavy-duty holders can be easily mounted to any RAILBLAZA StarPort base for clean, customizable storage. The flexible rubber strap locks down tight, even when your gear's wet, muddy, or bouncing in the chop. UV-stable materials mean it won't crack or crumble under sun, salt, or stress. Take your outdoor experience to the next level with RAILBLAZA G-Hold 50 mounts. You're adventures are out there … collect 'em all! Key features: * Made from marine-grade, UV-resistant materials—built to handle long days in the sun, salt, and water spray * Includes one G-Hold mount and retaining strap * The G-Hold 50 is perfect for securing paddles, Boga grips and other objects of around 2-inches or less in diameter * Mounts feature a flexible quick-release strap with two securing points, so you can be sure that whatever you put in those holders stays firmly in place! * For added support when mounting them on vertical surfaces, opt for the longer arm at the bottom * Easily installs into any StarPort kit or RAILBLAZA base port
Not Yet Reviewed
$15.99
The RAILBLAZA StarPort HD base mounts are the heavy-duty foundation that lets you mount anything, anywhere! With a rectangular footprint and multiple hole patterns, the StarPort HD base mounts are designed to fit directly onto many popular third-party mounts—like Scotty, RAM, and Cannon—so you can upgrade to this RAILBLAZA product without drilling new holes. Built from high-strength, UV-stable plastic, the StarPort HD is made to handle salt, sun, and repeated abuse without cracking or fading. Just like every StarPort, the base mount locks in any RAILBLAZA accessory with a simple push-and-twist, then releases just as easily when it's time to reconfigure. Whether you're rigging a kayak, boat, or off-road setup, the RAILBLAZA StarPort HD base mounts deliver rugged, secure mounting in seconds! So, stop struggling with those old kayak bases. Upgrade to the new RAILBLAZA StarPort HD base mounts! Product features and details: * Durable and secure—made from high-grade engineered plastics * Practical replacement for preexisting external mount bases from Scotty, RAM, Cannon, Fish-On * Perfect mounting option for kayaks, canoes, SUPs, and more! * Rectangular, four-point installation base consistent with North American industry standard * Compatible with the same hardware that is currently used to keep your base mounted to your kayak * The unique slide-locking mechanism fits and secures all RAILBLAZA bases and accessories * Other hardware options include rivets, screws/locknuts, or self-tapping screws
Not Yet Reviewed
$14.99
Get your points system working like new Mallory replacement condensers for their electronic and points style distributors contain special windings to protect your points from pitting, and moisture-proof seals to maximize ignition reliability.
( 8 )
$14.56
—
$18.58
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$12.99
—
$21.99
Vehicle speed sensors measure wheel speeds and provide this information to the vehicles ECU (Electronic Control Unit). The ECU then calculates ignition timing, transmission shift points, and air/fuel ratios for the vehicle. Data from the Vehicle Speed Sensor is also used in cruise control systems to maintain a constant speed. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts vehicle speed sensors line has superior coverage for domestic and import applications.
( 4 )
$10.99
—
$22.79
Taylor's Pro Wire 8mm TCW core spark plug wire sets beat the competition, both in looks and performance. They're 100 percent pure silicone insulated with a fiberglass reinforced jacket. The TCW core conductor is designed for racing applications where RFI is not a concern and is an excellent choice for Magneto, point type, and non-electronic ignition applications. Available in four colors, these wires feature Taylor's exclusive low profile, 100 percent silicone Pro Boot with finger grips and vibration proof spring lock terminals, and are designed to withstand over 600 degrees F when underhood temperatures are high.
Not Yet Reviewed
$20.00
VDO offers a wide range of premium ATE DOT 4 brake fluids specifically manufactured to meet a wide variety of different vehicle's performance and safety needs. The line includes ATE SL.6 brake fluid, an ideal brake fluid replacement for ESP, ABS, and ASR electronic brake systems; ATE SL for hydraulic brake and clutch systems; and ATE TYP 200 for the extreme demands of high performance and racing applications.
( 2 )
$17.99
Universal Air Conditioning offers heater control valves for a broad range of vehicles from the 1960s and up. These steel replacements have a gold iridited finish for protection and feature hose barb connection points for common sizes. The valves are built to factory-style specs to ensure a proper fit and performance. Order the model recommended for your application.
( 4 )
$12.99
Is it time for a tuneup? Replace your distributor's worn-out rotor with a new one from Standard Motor Products. Don't take chances with old, questionable, or faulty ignition components that can leave you stranded. Standard Motor Products replacement distributor rotors are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to Standard Motor Performance.
( 46 )
$12.10
Standard Motor T-Series ignition coils are offered in a variety of styles to cover a wide range of vehicle applications. Each coil model is designed to exceed OEM specifications for accurate, maintenance-free operation. High-efficiency laminations optimize magnetic field build-up to produce high spark energy and reliable performance. Standard Motor T-Series DIS ignition coil terminals are steel or aluminum, as indicated by the original equipment. Select the Standard Motor coil ignition designed for your application needs.
( 16 )
$14.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
