Availability
On Sale
The chrome plated MSD coil brackets offer easy, universal mounting for standard size ignition coils up to 2 1/4 in. diameter, including all MSD Blaster Coils.
( 113 )
$13.76
—
$15.74
$12.38
—
$14.17
On Sale
B&M Trick Shift fluid is the easiest way to firm up your transmission's shift performance. Not an additive, this safe and effective blend of extreme pressure agents and foam inhibitors will produce a noticeable shift improvement when you completely replace your existing fluid. It meets and exceeds Type F requirements, and is available in conventional and synthetic formulas.
( 130 )
$12.95
$11.66
On Sale
Holley offers their accelerator pump diaphragms for all of their carburetors. These quality pieces ensure that the job is done right and help to keep your carb functioning like new.
( 117 )
$15.88
—
$19.61
$14.29
—
$17.65
On Sale
Available in nylon or steel versions, Hurst Pit Pack bushings improve the performance and lengthen the life span of your shifter. The steel bushings withstand severe racing conditions, while the nylon versions eliminate stick vibrations on the street. Hurst Pit Packs can be used on Mastershift 3-speed, Competition/Plus 4-speed, and V-Gate 2 shifters. Kits include seven steel or nylon bushings and spring clips.
( 120 )
$20.85
$18.77
On Sale
Holley fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They transform jet changing into an easy process with no worries of ripped gaskets.
( 89 )
$11.17
—
$15.88
$10.05
—
$14.29
On Sale
Holley replacement power valves are an important component in the power enrichment circuit of Holley's performance carburetors. They operate by using engine vacuum to control their opening and closing rate. When they open, additional fuel is supplied to the main system during heavy load or under full power situations to eliminate hesitation and bogging--ensuring the smooth delivery of power without any drivability concerns. They're available in many different vacuum ranges to time the system's operation to your specific requirements, and they come in your choice of single-stage, two-stage, and high-flow designs. A gasket is included.
( 129 )
$15.88
—
$19.60
$14.29
—
$17.64
On Sale
Holley offers base gaskets for every type of Holley carburetor. From the base plate gasket to the air cleaner ring gasket and everything in between, you're sure to find what you need.
( 95 )
$13.95
—
$22.39
$12.56
—
$20.15
On Sale
Replace your worn or missing throttle studs with the Holley recommended carburetor throttle lever studs.
( 98 )
$13.03
—
$21.57
$11.73
—
$19.41
On Sale
Mr. Gasket chrome plated water necks feature an O-ring style seal to prevent water leaks. Precision die-cast for a great fit, they're first polished to a high luster, then beautifully chrome plated for lasting beauty. These water necks come complete with an O-ring and mounting bolts.
( 61 )
$22.94
—
$29.11
$20.65
—
$21.83
On Sale
Restore the performance of your high-mileage fuel pressure regulator with these genuine Holley diaphragm repair kits. You'll regain the accuracy and performance of the regulator from when it was new.
( 64 )
$11.85
$10.67
On Sale
ACCEL HEI power pigtails clean up your engine bay. For GM HEI coil-in-cap, these connectors eliminate the use of single spade connectors that are prone to falling off and killing your ignition. ACCEL pigtails with high-temperature connectors offer a positive fit with a locking tab and shark fin to ensure that the connection between your wiring and HEI stays intact. They house two 10 in. lead wires, one bright red for your 12 V key-switched wire, and the other green for your tachometer.
( 145 )
$19.50
$17.55
On Sale
Fluidyne High Performance AN to AN O-ring adapter fittings join two components of the same size or acclimate two different sizes together with a secure leak-free connection. Available in several size choices, each O-ring fitting features aluminum construction and a durable black anodized finish. Select the fittings based on your cooling system needs.
Not Yet Reviewed
$13.99
—
$17.49
$12.59
—
$15.74
On Sale
Protect your camshaft and flat tappet lifters with a bottle of Mr. Gasket Zinc Engine Oil Additive. Modern motor oils no longer include the zinc, ZDDP, and extreme pressure additives needed to properly lubricate the cam and lifters. One 4 oz. bottle effectively treats 5-7 quarts of oil to prevent scuffing and galling, with protection for the valvetrain on your muscle car, hot rod, street rod, or classic car. This fluid is compatible with synthetic, petroleum, and blended motor oils. Add a bottle to the crankcase of your engine at each oil change. (Use with Pre-ODB and off-road vehicles.)
( 11 )
$17.15
$15.44
On Sale
MSD ballast resistors are just the ticket to connect your MSD coil to your stock points ignition system.Connect your coils the safe and secure way with MSD.
( 33 )
$20.46
$18.41
On Sale
B&M neutral/reverse safety switches are the perfect safety devices for your car. They will only allow your car to start when it is in park or neutral, not while it is in gear. If it starts in gear, you can imagine the damage that could be done. They can also be used to turn on your backup lights when your car is in reverse.
( 88 )
$19.49
—
$22.18
$17.54
—
$19.96
On Sale
Back by popular demand and with an improved formula, B&M Synthetic Trick Shift transmission fluid is specially formulated for modern-day electronic automatic transmissions. The 100 percent synthetic base was chosen for its foam inhibitors, superior resistance to oxidation, and its high shear stable control additives for superior resistance to viscosity loss between maintenance intervals. Synthetic Trick Shift is optimized with special friction control additives, preventing slip and shudder—and resulting in smooth positive shifts. Also, it contains special wear and seal protection chemistry commonly found in premium factory transmission fluids preferred by OE manufacturers. This formula is compatible with other automatic transmission fluids, but for optimum performance it's recommended that you drain and replace all transmission fluid with B&M Synthetic Trick Shift. Features include: * Ideal for racing, performance street, RV, and heavy-duty applications * Compatible with other synthetic transmission fluids * Premium synthetic blend for all vehicle makes * Recommended for electronic transmissions * Quart size container with easy-pour spout * Specially formulated for positive shifts * Signature B&M blue fluid color
( 4 )
$16.31
$10.60
On Sale
Holley has fittings to adapt different sized fuel lines to bare Holley fuel bowls, as well as hose and banjo fittings for special applications.
( 105 )
$18.99
—
$22.43
$17.09
—
$20.19
On Sale
Scott Drake CRL windshield and body sealant is a ready-to-use caulk for re-sealing windshields and rear windows. It can also be useful for sealing drip rails and pinchwelds after installation of vinyl hardtops. Water-resistant CRL cures to a tough, flexible, rubbery bead, locking out air and dust. You'll notice the best adhesion to glass, butyl tape, and all metal surfaces.
( 7 )
$15.41
$13.87
On Sale
Holley vacuum secondary diaphragms will replace your existing worn-out diaphragms. They are made from a high performance rubber material and will fit most Holley carburetors with vacuum secondaries.
( 49 )
$18.99
—
$22.41
$17.09
—
$20.17
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 18 )
$11.29
—
$27.37
$10.16
—
$15.05
On Sale
Precise timing of your engine is necessary for vehicle performance. Scott Drake removable timing pointers will help you maintain accurate settings when mounted to your timing chain cover. They're made from stamped steel with a black zinc plated finish, and come with mounting screw.
( 42 )
$11.85
$10.67
On Sale
Upgrade your carburetor's hardware for maximum performance with the help of Holley. Their needle and seat hardware kits work with all Holley carbs with an adjustable needle and seat. Also keeping style in mind, these kits are offered in gold or black. Kits include adjusting nut, lock screw, gaskets, and O-ring.
( 20 )
$11.40
—
$12.58
$10.26
—
$11.32
On Sale
Holley Sniper EFI throttle lever extensions bolt directly onto your current throttle lever, increasing the mechanical advantage of your throttle cable, or rod. This results in a significantly decreased pedal effort, and smoother pedal feel, especially at low throttle input, such as when you are leaving a stoplight. They are ideal if a stiffer throttle pedal is noticed after an EFI conversion. Features: * Direct bolt-on installation * Hardware included * Decreases pedal effort for smoother driving characteristics * Corrects poor throttle cable/rod geometry
( 63 )
$19.97
$17.97
On Sale
Holley kickdown spring and bracket sets adapt your Holley carburetor for use with your Ford automatic transmission. The brackets have one mounting hole and one locator pin. They're designed for carburetors with a 30cc accelerator pump.
( 39 )
$17.78
—
$19.60
$16.00
—
$17.64
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
