Availability
Summit Bucks
Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.
( 20 )
$12.53
—
$19.23
Classic Tube automatic transmission vent lines are designed to replace your OEM vent lines. They are pre-bent, formed, and ready to install with fittings for a direct bolt-on fit. The vent lines are available in steel or stainless steel to fit your specific vehicle's needs.
Not Yet Reviewed
$14.99
Summit Bucks
Sonnax Line pressure booster kits allow you to shift aggressively and then feel the tranny grab the clutches with more power when it changes gear. The larger boost valves and matching regulator springs raise line pressure progressively as higher pressure is commanded. These kits modify the sensor signal, which causes the computer to create a pressure increase. They're installed between the pressure sensor and vehicle harness using OE-style sealed connectors; no modifications are needed to the transmission.
( 14 )
$17.12
Clearance
Raybestos R-Line wheel hub assemblies are designed to OE specifications—and tested for endurance, temperature control, hydraulic and salt resistance, as well as metallurgical integrity and vibration. This ensures Raybestos R-Line assemblies deliver a long service life with consistent performance that's quiet and safe. Order the model designed for fitment on your vehicle application.
( 20 )
$31.99
$19.50
Howe remote bleeder kits allow you to bleed your hydraulic throwout bearing from outside the bellhousing--making clutch bleeding easy. The kit includes one 36 in. long and one 22 in. long braided stainless line along with fittings to fit in place of the bleeder screw on either style of a Howe hydraulic throw-out bearing.
( 12 )
$10.99
Shifnoid air shifter replacement components help maintain optimal operation of your air shifter. They offer everything from CO2 line to bottle valves, as well as fittings, seals, and washers. To ensure the best performance, service your Shifnoid shifter with their genuine replacement components.
( 5 )
$10.99
—
$11.99
ARB offers Air Locker replacement parts for their air-powered locker systems. With all the support parts you need, ARB will keep your air locker system operating at peak condition for miles and miles.
( 17 )
$17.00
Clearance
Versatility by design allows tuning of NORAM racing products—including their clutch components—to fit your machine's unique characteristics as well as the track's. That means response based upon your standards, not somebody else's. Every NORAM racing go-kart part gets backed by years of technical innovation in design, precision engineering, and the use of the highest quality components. NORAM—much like The World's Speed Shop®—believes that high quality doesn't have to mean high price to help increase your chances of winning. The choice is simple. Why just run when you can fly with the NORAM clutch components designed to fit your application?
Not Yet Reviewed
$27.99
$18.50
Strange shock bearings are available for single or double adjustable shocks. They are PTFE lined for smooth performance with your shocks. Choose the size needed.
Not Yet Reviewed
$12.99
Manufacturer Rebate
Dedenbear offers these quick-connect fittings for use with your CO2 system. They're available in your choice of sizes and configurations to fit your system needs.
Not Yet Reviewed
$14.99
—
$17.99
Prevent leaks inside of your transmission with these Hughes Performance PTFE ring kits. These ring kits are Teflon® coated to reduce friction and are designed to keep oil where it belongs and can do the most good, not where it can cause problems. These rings are offered for a variety of popular performance transmissions and come in sets so you aren't searching for that one problem ring. Fix your leak or prevent it before it happens with these Hughes Performance PTFE ring kits.
Not Yet Reviewed
$15.99
In high performance and racing applications, it's important to avoid restriction and maintain line pressure by keeping a good supply of clean, fresh fluid to the pump. Summit™ Hi-Flow race transmission filter kits eliminate the restrictive factory-style filter element and instead use a low restriction brass screen that allows maximum flow and filtration which is the key to consistency, performance, and long life. We recommend these for all high performance applications that utilize a full-manual or trans-brake valve body.
( 9 )
$18.99
Scott Drake differential vents will replace your old vents and help your axle equalize atmospheric pressure, keeping excessive debris from contaminating the differential. These steel vents are strongly made for years of use; they screw into the threaded hole in the axle, while also securing the brake line and hose.
( 17 )
$18.99
If you're having trouble with your hydraulic clutch releasing, there's a good chance you may have air in the system. Bleeding your clutch line can be done more easily with Russell hydraulic clutch speed bleeder assemblies. These are a replacement for your original bleeder valve, with a spring-loaded one-way ball and check valve design. When opened, this unique setup allows the old fluid and air out, and then closes automatically between pumps to prohibit the old air and fluid from re-entering the line. It's a real time-saver!
( 10 )
$15.95
Auto Metal Direct pivot ball studs are part of AMD's extensive line of OE-quality replacement parts made to help you get your car or truck back into top condition. AMD pivot ball studs are accurately-machined reproductions that are the correct length and heat-treated for hardness. They feature a black oil finish and, where applicable, include factory-style integral rubber seals.
( 27 )
$13.99
—
$16.99
Summit Bucks
GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)
( 2 )
$13.40
—
$14.67
On Sale
Get a classic look without breaking the bank! The Scott Drake line of reproduction transmission fluid dipsticks is manufactured from quality materials, ensuring a proper fit.
( 18 )
$21.37
$19.23
Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job—including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, and much more. These magnetic differential fill plugs will capture particles, keeping them out of your oil, bearings, and gears. They are available for a variety of vehicle and axle applications.
( 7 )
$10.89
—
$13.89
Summit Bucks
Sonnax TCC regulator and isolator valve kits assist in recovering hydraulic control and renew TCC performance. Severe wear of the TCC (torque convertor clutch) regulator valve bore, caused by oscillation of the OE valve, allows the regulated converter to apply pressure to your exhaust. This is a primary cause for TCC-related slip code and overheated converters. Exhaust pressure also diminishes line pressure, which can result in burnt clutches. Excess wear at the isolator valve bore reduces TCC apply pressure. Reconditioning the bore and installing a Sonnax TCC regulator and isolator valve kit will restore normal TCC operation by reestablishing the hydraulic integrity of this circuit. Order the kit recommended for your transmission application. Features include: * Sleeve manufactured from highly wear-resistant aluminum * Hard-coat anodized aluminum regulator valve combats premature wear * Isolator valve lengthened to operate in unworn portions of the bore * Annular grooves help center valves in bore to reduce future side-load wear
( 4 )
$18.83
Get your differential lined up right with one of these Richmond Gear differential carrier bearing shim kits. They include a variety of steel shims to set the correct position of your carrier bearings.
( 24 )
$10.99
—
$13.99
WEHRS shifter arms are designed to complement the WEHRS line of manual transmission shifters. Manufactured from billet aluminum, these arms are lightweight and have a protective black anodized finish for durability.
Not Yet Reviewed
$15.99
If your transmission isn't performing properly, then you may need one of these TransGo automatic transmission boost valves. They are available in different diameters that provide increased line pressure so that your transmission will work correctly when used under conditions other than what the factory intended. Get the correct pressure with TransGo automatic transmission boost valves and you'll increase your transmission's reliability.
( 29 )
$15.74
—
$18.64
Installing a new ring and pinion? Motive Gear will make things easier with these differential pinion shims. They're made of steel for the ultimate durability and will keep everything in line just as they should be. Motive Gear offers these differential pinion shims in a kit so you can customize the thickness to your car's individual needs. Order the set that corresponds with your axle model.
( 21 )
$12.99
—
$19.99
Summit Bucks
The Sonnax automatic transmission reverse servo spacers provide a simple, low-cost way to add durability to the GM 4L80-E and 4L85-E transmissions and eliminates the need to retrofit early design reverse servo pistons into late units. Due to a design change in 1996, it had been found that the reverse servo piston commonly breaks because it is stressed more than early servos. Installation of Sonnax reverse servo spacers reduce piston stress by increasing the contact area between the aluminum piston and spacer and incorporating a cushion spring washer. The new contact area is over two times the original and the pressure between the piston and the spacer is reduced by 60 percent. The reverse servo spacer kits easily install during assembly and does not require machining or other modifications. Excessively high line pressure in 'Reverse' is directly related to boost valve wear and cross-leaks into the EPC oil circuit. For maximum durability, inspect and replace the boost valve with one of the Sonnax 4L80-E boost valve kits (sold separately). Product features and benefits: * Increased contact area reduces pressure between apply pin and piston by 60 percent * Added Belleville spring washer reduces shock on piston * No machining necessary, drop-in components * Maximum durability for minimal cost
Not Yet Reviewed
$12.91
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
