Availability
Showing In Stock Items. Show All 216 Items.
Summit Racing™ oil pump primers make it easy to get oil to the top of your engine. They're designed to fit in your distributor hole and require no modifications to use. The Chevy primers feature a billet aluminum adjustable collar and black oxide coated steel shaft; while the Ford and Mopar primers use a standard steel shaft with no collar. Order the model recommended for your year/make and engine application.
( 178 )
$11.99
—
$13.99
Summit Racing™ oil pump pickup tube braces are simple and economical, but very effective. These girdles reduce O-ring sealing problems that can cause your oil pump to suck up air and subsequent oil starvation and a drop in oil pressure. Machined from billet aluminum, our oil pump pickup tube braces use two bolts, instead of one, ensuring an equal clamping force is exerted to both sides of the oil pickup tube flange, so the O-ring can form a proper seal. Improve the reliability and performance of your oiling system with Summit Racing™ oil pump pickup tube braces.
( 8 )
$17.99
These 5/16 in. pushrod checkers feature over 1 in. of travel to help you determine the proper pushrod length for your application. A must-have tool for setting up proper valvetrain geometry. They are made from thin-wall steel and have common end configurations for your prefect measurement.
( 176 )
$17.99
Simplify your valvetrain maintenance with COMP Cams valvetrain checking springs. They feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft. They're available as singles or pairs.
( 67 )
$15.95
When you need to quickly and easily measure gap width and thickness, use one of our Summit Racing™ feeler gauges—versatile handy tools that can be used on anything from guitars to engines and everything in between. The gauges are constructed with tempered steel blades ranging in various sizes (inches or mm) and can be stacked to achieve increased gap measurements. Each blade has the sizes laser-etched for easy identification and a measurement that is true to the label. The blades are bound within a blade protector to prevent loss of individual blades and are designed with a thumb notch for easy selection, use, and easy return.
( 11 )
$11.99
—
$13.99
Performance Tool offset distributor clamp wrenches are designed to make distributor bolt removal or installation easy. You can use one of the wrenches by itself or by attaching a 3/8 in. drive ratchet. They are made from drop-forged steel and are chrome plated to resist corrosion.
( 41 )
$10.99
Howards Cams offers these pushrod length checkers as easy and economical tools to lay out and determine proper pushrod length for proper valvetrain geometry. This is necessary to obtain the desired results from the cam and ensure that damage is not done to the rest of the valvetrain.
( 30 )
$17.99
Our Summit Racing™ stud removal tools make short work of pressed-in rocker arm studs. Just position the tools over side-by-side studs, screw down the retaining nut, and the stud is forced out. Plus, you can use the supplied arbor to accurately align bosses for screw-in studs.
( 45 )
$14.99
Proform replacement piston ring filer wheels are perfect for changing out that tired old worn-out one you have now. They are designed as a direct replacement for your ring filer and will bring your tool back to life.
( 8 )
$12.99
—
$17.99
These Lisle piston ring compressors make installing pistons easier. Their easy-to-use design allows you to safely compress your piston rings without damage. The spring clutch ensures a perfect fit on the piston, while the positive locking action ensures that they will not slip before the job is done. Quit fighting with your old ring compressor and get one of these Lisle piston ring compressors for your next job.
( 57 )
$16.99
—
$18.99
These Proform light-pressure springs make the assembly of components much easier. They provide enough pressure to hold the valve assembly together when checking camshaft figures, installed height, etc.
( 13 )
$12.99
Finding top dead center has never been easier than with our Summit Racing™ piston stops. Whether your cylinder heads are on the engine block or off, we have a style to suit your needs. Both styles feature durable steel construction for long service life.
( 128 )
$12.99
Lisle valve holders offer 2-step fitting for both 14mm and 18mm spark plug threads. When you replace valve springs or valve stems seals, air pressure helps prevent valves from falling into the combustion chamber. They come with two-step fitting for both 14mm and 18mm threads and feature a heavy-duty 12 in. flexible hose for easy access to the spark plug hole and air supply.
( 26 )
$14.99
Allstar Performance exhaust block-off plates enable you to seal off exhaust ports when repairing or storing your engine. Machined from different thicknesses of aluminum, the plates will seal standard and spread port small block Chevy exhaust ports to protect against moisture, dust, and dirt.
( 4 )
$19.99
Mahle Lock'N Tool makes inserting wrist pin lock rings easier. These lightweight plastic tools are available to fit different clip sizes. Order the clip insertion tools needed for your applications.
( 28 )
$16.89
These COMP Cams piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use.
( 60 )
$15.95
Now you don't have to spill fuel all over the engine when removing fuel-bowl screws to service Holley carburetors. Moroso carburetor drain cups use a special channeled handle to catch dripping fuel and direct it into the holding cup. They are made from fuel resistant polyethylene
( 7 )
$19.99
Lisle cylinder hone replacement components allow you to extend your range of use for your standard or smaller Lisle engine cylinder hones. Their long, fast-cutting, and accurate 5 in. stones are available in five grits; while their 3 1/2 in. stones are available in four different grits. Additional rack sets are also available. Quickly change stones and racks for your cylinder size with Lisle cylinder hone replacement components.
( 15 )
$10.99
—
$19.99
Sometimes the difference between a pro and a novice is the tools. Powerbuilt jam nut valve tools close the gap. Available in 10mm and 12mm sizes, these tools remove the frustration of improvising during a valve adjustment when precision is required. The classic case of the "right tool for the job", Powerbuilt's jam nut and slotted valve adjusting tools make the job of precisely adjusting valves easy on Honda®, VTEC, Toyota, Mazda, Nissan, and other vehicles with 10 or 12mm valve nuts. Each tool features a window cutaway that allows visual alignment of the screwdriver blade with the valve stud, while the 7 1/2 in. side handle provides the needed leverage to loosen tight jam nuts. Select the size needed for your valve nuts.
( 12 )
$19.99
Proform pushrod length checkers help to prevent problems that may occur with incorrect-length pushrods installed. They're available in different styles for use on a variety of vehicles from the 1950s and up. Order the model best suited for your application.
( 69 )
$13.99
—
$18.99
These Proform adjustable pushrod length checkers feature over 1 in. of travel to help you determine the proper pushrod length for your application. Must-have tools for setting up proper valvetrain geometry, they are made from thin-wall steel and have common end configurations for prefect measuring.
( 15 )
$19.99
On Sale
OEM Automotive Tools piston ring compressors are offered for several applications. They feature self-locking mechanisms with double tension bands and heavy-duty pawls. Constructed from high-grade spring steel, they're available in different sizes, piston ranges, and depths. Whether you have a truck or a car, OEM Automotive Tools has piston ring compressors to assist you with your install.
( 5 )
$16.99
—
$20.99
$15.29
—
$18.89
Proform piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use. These economical stops are available in different styles for various vehicle make applications.
( 32 )
$13.99
—
$16.99
Isky valvetrain checking springs assist you in checking valve to piston clearance. Isky light-tension steel checking springs are the simple and practical way to do the job.
( 2 )
$11.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
