Availability
Fast-drying Permatex copper spray-a-gasket sealer helps to dissipate heat, prevent gasket burnout, and improve heat transfer. It seals instantly, while filling hot spots and minor surface irregularities. With a temperature range of -50 degrees F to 500 degrees F (-45 C to 260 C), it's perfect for cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets, and other high-temperature applications.
( 27 )
$12.99
Permatex Ultra Black Maximum Oil Resistance RTV silicone gasket maker is fast-curing, sensor safe, low-odor, and non-corrosive. Meeting the performance specs of OE silicone gaskets, this product retains high-flexibility and oil resistance properties through use of a patented adhesion system. Permatex Ultra Black has a temperature range of -65 degrees F to 500 degrees F (-54 degrees C to 260 degrees C) intermittent. Suggested applications: * Automotive: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers * Marine: Thermostat housings, water pumps, timing covers, intake manifold end seals, oil pans, valve covers
( 142 )
$18.99
Permatex high performance thread sealant is formulated specifically for tapered metal pipe thread fittings—and works great as a replacement for PTFE tape and pipe dopes. It cures rapidly to withstand up to 10,000 psi, prevents galling, and protects mated threaded areas from rust and corrosion. Features of Permatex high performance thread sealant: * Contains PTFE * OEM-specified * Standard applications: stainless steel fittings, head bolts into through holes, oil psi sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings * Motorcycle applications: timing hole plug and oil hose fittings * Heavy-duty applications include drain plugs, all tapered fittings
( 8 )
$14.99
Permatex copper anti-seize lubricant is a premium-quality dressing that may be used to prevent seizing, corrosion, and galling where high-temperature conditions exist. This product contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier—and is fortified with high-quality rust and corrosion inhibitors. It also provides good electrical conductivity. Suggested applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, and fuel filter fittings. Copper anti-seize lube features a brush-top applicator for easy application, and is available in multiple sizes.
( 8 )
$15.99
Loctite RTV 598 black silicone gasket maker caulk gun cartridges contain a fast-curing, sensor-safe, low-odor, non-corrosive compound. RTV 598 meets the performance specs of OE silicone gaskets, retains high flexibility and oil resistance, has a temperature range of -75 to 625 degrees F intermittent, and resists auto/shop fluids and vibration. Loctite RTV 598 black silicone gasket maker caulk gun cartridges were specially designed to meet dealership warranty requirements, but are used and trusted by professionals everywhere. Order the tube volume needed. Suggested applications include: * Valve covers * Oil pans * Intake manifold end seals * Timing covers * Transmission pans
Not Yet Reviewed
$17.99
When a chemical gasket is not an option, what should you use? Permatex High Tack Spray-A-Gasket sealant is a fast-drying all-purpose sealant that dries to a highly tacky, non-brittle film. It is suitable for both import and domestic vehicle applications (any model year or performance caliber). This spray-on sealant is a reliable general adhesive that can resist gasoline, oil, antifreeze, axle lube, kerosene, propane and butane. It remains effective under temperatures of -65 degrees F to 500 degrees F, so its ideal for valve covers, fuel pumps, manifold gaskets and more!
( 1 )
$18.99
Loctite RTV 598 black silicone gasket maker is a fast-curing, sensor-safe, low-odor, non-corrosive compound. RTV 598 meets the performance specs of OE silicone gaskets and retains high flexibility and oil resistance. It has a temperature range of -75 degrees F to 625 degrees F intermittent and resists auto and shop fluids and vibration. Suggested applications include: * Valve covers * Oil pans * Intake manifold end seals * Timing covers * Transmission pans
Not Yet Reviewed
$17.99
Loctite PST thread sealant sticks are single component, semi-solid anaerobic pipe sealant compounds. The self-feeding applicator sticks facilitate application of the material where a conventional liquid or paste would be difficult to use. Loctite PST sticks cure rapidly to provide immediate low-pressure sealing. The controlled lubricity prevents galling, protects threaded areas from rust and corrosion, and provides easy disassembly. Loctite PST thread sealant sticks are recommended for sealing metal tapered pipe threads and fittings in automotive applications. Suggested applications include: * Stainless steel fittings * Oil and coolant lines * Fuel fittings * Rear axle fill plug * Intake manifold switches * Head bolts into through holes
Not Yet Reviewed
$16.99
Loctite 565 Thread Sealant is a white to off-white, one-part, low strength, high viscosity, anaerobically cured, methacrylate ester, acrylic thread sealant designed for the locking and sealing of metal pipes and fittings. This product cures when confined in the absence of air between close fitting metal surfaces—and prevents loosening and leakage from shock and vibration. Additional details: * Controlled strength sealant is formulated specifically for metal, tapered pipe thread fittings * Replaces most tapes and pipe dopes * Cures rapidly to withstand 10,000 psi * Perfect as a replacement for pre-coated parts * Prevents galling and protects mated threaded areas from rust and corrosion * OEM specified * Automotive equivalent to Loctite Industrial Part 56531 * Typical applications: Stainless steel fittings, head bolts into through holes, oil PSI sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings
Not Yet Reviewed
$15.99
Edelbrock high-temp silicon sealant is the right stuff for your intake manifold install. This high-quality RTV silicone is oil-resistant, fast-curing, sensor-safe, and non-corrosive. The sealant is low-odor and meets the performance specifications of OE silicone gaskets. Plus, it will retain high flexibility to prevent the leaks and seepage caused by vibration and thermal expansion. When you're ready to install exhaust components, be equipped for the job with Edelbrock high-temp silicon sealant.
( 18 )
$12.95
On Sale
Liqui Moly Pro-Line Throttle Valve Cleaner is a mixture of cleaning agents for cleaning and maintaining intake manifold and throttle body of gasoline engines. It dissolves and removes deposits and contaminants, restores normal function of moving parts—and it is also ideally suited to clean intake valves of modern GDI engines. It's simple to use and economical. Keep your intake system in perfect working order and help reduce repair costs with regular use of Pro-Line Throttle Valve Cleaner by Liqui Moly. Key features and benefits: * Used for degreasing and cleaning the inside and outside of carburetors and fuel injection systems * Suitable for use in all 4-stroke gasoline engines, with or without turbochargers * Rapid and effective cleaning and degreasing * Cleaning without dismantling * Safe with catalytic converters (EGR) and (GPF) systems * A preventive application every 12 months/10,000 miles is recommended
Not Yet Reviewed
$20.99
$18.89
Liquid Performance Complete Fuel System Cleaner is an advanced combustion chamber detergent which is highly effective for all types of fuel system deposits. It provides superior intake valve deposit control, port fuel injection, and carburetor detergency. Besides reducing deposits this formula also eliminates the cause of pre-ignition, reduces run-on—and rapidly cleans up carburetors, fuel injectors, intake valves, and manifolds to restore your vehicle's original power, performance, and fuel mileage. One ounce treats up to 10 gallons of fuel.
Not Yet Reviewed
$22.79
Summit Racing™ RTV black silicone is a low volatile sealant-adhesive that can be used on metal, glass, wood, ceramics, rubber, and most plastics. As an instant gasket maker, this product replaces a wide range of paper, cork, asbestos, felt, and metal gaskets. It has excellent adhesion characteristics and high chemical resistance; the spray will not sag or shrink, and is even impervious to temperature extremes. RTV black silicone is safe for use on oxygen sensor equipped vehicles; it remains permanently flexible, has a temperature range of -60 degrees F to +500 degrees F, and meets or exceeds mil spec (MIL-A-46106). For best adhesion results, the surface must be clean, dry, and free from oil, tar, dirt, and dust.
( 38 )
$17.99
Summit Racing™ RTV red silicone is a low volatile sealant-adhesive that can be used on metal, glass, wood, ceramics, rubber, and most plastics. As an instant gasket maker, this product replaces a wide range of paper, cork, asbestos, felt, and metal gaskets. It has excellent adhesion characteristics, high chemical resistance, will not sag or shrink, and is even impervious to temperature extremes. RTV red silicone is safe for use on oxygen sensor-equipped vehicles, remains permanently flexible, has a temperature range of -60 degrees F to +650 degrees F, and meets or exceeds mil spec (MIL-A-46106). For best adhesion results, the surface must be clean, dry, and free from oil, tar, dirt, and dust.
( 1 )
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
