Availability
Showing In Stock Items. Show All 118 Items.
Summit Racing™ offers headlight dimmer switches for a wide range of Chevrolet cars and trucks from the 1930s and up. The floor-mounted switches are produced to factory standards and are application-specific. Order the replacement model recommended for your vehicle.
Not Yet Reviewed
$12.99
—
$18.99
OER GM Restoration Parts ribbed door lock knobs are beautiful reproductions of the originals that will keep your GM's interior looking authentic. Each pair of knobs is manufactured in diecast zinc and chrome plated to a highly polished appearance. Their threaded design screws on to any application where the ribbed design knobs were originally installed by the factory.
( 34 )
$14.99
Replace your old factory original door lock knobs with new ones from OER. They are manufactured from premium materials and offered in several different styles and finishes. Renew the interior look of your classic vehicle with parts featured by OER.
( 7 )
$10.99
—
$12.99
These OER headlamp switch mounting nuts are used for retaining the headlamp switch to the instrument panel on various Chevrolet, Buick, Oldsmobile, and Pontiac models. They're manufactured from high-quality materials and are designed to fit in the factory location.
( 21 )
$10.99
Replace your old or damaged dash air vent outlets with our Summit Racing™ high-quality reproductions. Available for a variety of applications, the dash air vent outlets are finely detailed, absolutely correct replacements for the factory units.
( 4 )
$14.99
Are your pedal pads worn or cracked? Not only do they look bad, but damaged pedal pads can also be a safety hazard while driving. Replace them with these reproduction pedal pads from OER! These top-quality pedal pads are identical replicas of the factory originals, down to the ribbing on the pads. Gas, brake, clutch, and E-brake pads are available for a variety of applications and correctly install in place of the stock pads. OER pedal pads will improve the appearance of your interior, and their rubber tread will help keep your feet in good contact with the pedals for safe braking and acceleration.
( 101 )
$10.99
—
$16.99
Goodmark window regulator rollers are designed to replace the factory worn-out, cracked, or missing rollers. They are made from quality materials and include the pivot to complete the installation.
( 5 )
$10.99
These OER steering column to floor rubber boots are designed to slide over the steering column at the base of the floor. The factory boot is commonly cracked or melted, so they'll directly replace those with no modifications.
( 5 )
$19.99
Goodmark sunvisor bushings are designed to replace your worn factory bushings so your visors will work like new again. They are designed to meet or exceed OEM specifications and are available for a variety of applications.
( 12 )
$13.99
These OER headliner bow clip sets are essential for keeping headliner bows in the correct location on sedans. They are manufactured from durable materials and fit in the factory location with no modifications.
( 15 )
$15.99
If you're in need of interior door grab handles, Dorman has just what you're after--their replacement interior door grab handles. These quality replacements are reproductions of the factory originals for your worn, cracked, or missing factory-style handles. They're manufactured from high-grade material to withstand the rigors of repetitive daily use and will definitely give you and your passengers something to grab onto!
( 5 )
$15.99
CIPA Day/Night interior rear view mirrors are the perfect replacement for your factory installed mirror. The front and rear internal faces of the Day/Night mirror glass are not parallel to one another, allowing a manual tab adjustment to switch between day and night positions. This means an increase in both safety and comfort, at a fraction of dealer costs. Expand your horizons. They fit OEM mounting on most cars, trucks, or vans, with an included mounting bracket. They include mirror assemblies and wedge button. Mirror mounting adhesive is not included.
( 24 )
$14.99
—
$16.99
When turning the key to start your vehicle, the sector gear turns the ignition rack assembly and activates the ignition switch. OER ignition switch actuator sector gears are ideal reproductions manufactured to factory specifications to replace non-functioning gears. These OE-style steering column components install directly behind the ignition switch on vehicles with tilt steering wheels.
Not Yet Reviewed
$16.99
These OER wiper switch nuts are designed to mount the windshield wiper switches in place on the dash. They are reproductions of the factory chrome nut, so you know that they'll match the rest of your OER interior components.
( 2 )
$11.99
—
$16.99
These OER shifter boot rings are designed to retain your factory shifter boot in its stock location. The rings are made from durable steel and are available in different finishes to fit your factory shifter console.
( 7 )
$19.99
Restore the original look to your dash interior on your classic Camaro with OER dash knob bezel sets. These correct reproduction sets are manufactured to original GM factory specifications to provide the most accurate fit, form, and function, making them perfect for replacing worn, damaged, or missing originals. OER dash knob bezel sets include a cigarette lighter bezel, a windshield washer bezel, a light bezel, and an ignition bezel.
( 6 )
$18.99
Keep the interior of your muscle car/truck cool and quiet with the help of firewall insulation pads from Summit Racing™. These pads are reproduced using high-quality materials to look as close to the originals as possible. They'll suppress engine noise and heat from transferring into your cabin, and the pads install like the factory models did. Finish the restoration of your classic GM, Ford, or Mopar with period-correct parts from Summit Racing™.
( 5 )
$18.99
Finely crafted, injection-molded pedal pads by RESTOPARTS® Manufactured are just like the factory originals, right down to the last rubber line. Available for your gas, brake, clutch, or emergency brake pedals, these are the most correctly reproduced brake pedal pads—a show-car must! With all-authentic, all-original parts, RESTOPARTS® helps make your restoration vehicle project perfect. Order the replacement pedal pads designed for your applications.
( 43 )
$12.99
—
$13.99
When you're in the process of restoring a classic truck, you'll begin to notice that 30+ years of abuse on your squarebody's door handle has likely left it in less than stellar condition. Why not replace it with a brand new inside door handle from Brothers Trucks! Made from high-quality materials for durability, each handle matches OE appearance for long-lasting good looks--and includes all factory mounting points for an easy installation. Order the inside door handles designed for your vehicle.
Not Yet Reviewed
$11.85
Mr. Horsepower is known to bring the heat—and reflect it! Featuring Clay Smith Cams' cigar-chomping mascot, this folding sunshade is perfect for summertime car shows and extended parking lot stays. The UV-resistant screen keeps your hot rod's interior cool and looking factory fresh, and it's flexible enough to fit snugly along most windshields for complete coverage. Unfolded, the accordion shade measures 58 in. W x 27 1/2 in. H. Simply fold it up and toss it in the trunk when you're ready to cruise.
( 4 )
$18.99
Summit Racing™ offers ignition switches for a wide range of vehicles, including many Chevrolet and GMC cars and trucks from the 1950s and '60s. These stock replacements are made of high-quality plastic according to factory specs to ensure fit, performance, and dependability. If you're looking to finish your project car and need a new ignition switch, Summit Racing™ has the correct parts at the right price.
( 5 )
$15.99
Has your tilt wheel release lever gotten damaged? Or is it looking shabby next to all of your nice restoration work? Replace it with a new OER tilt wheel release lever! These levers are reproductions of the factory originals. They're available for a variety of models and are made to fit and operate accurately in your application.
( 6 )
$19.99
Are you in the market for replacement door pull strap end covers? RESTOPARTS® Manufactured reproduction end covers feature all of the same factory dimensions as the originals in fit and finish. These cover plates fit into the pull strap end for a clean, finished appearance. They require two per door.
( 3 )
$10.99
—
$13.99
On Sale
Made with new tooling for an excellent fit and finish, Holley Classic Trucks pillar moldings include all factory mounting points for an easy installation. The moldings are available for a variety of vehicles and positions. When it comes to a vehicle restoration project, the body and exterior are only half of the equation. To really complete the job, you will also need to finish the interior as well. For all of your restoration part and accessory needs, including interior pillar molding trim, look to Holley Classic Trucks.
Not Yet Reviewed
$26.49
$14.57
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
