Availability
Showing In Stock Items. Show All 35 Items.
Racepak Molex terminal kits are used to shorten a cable that needs to terminate. Available with 2- or 3-pin Molex connectors, they include both male and female connectors and corresponding pins. These connectors make it easier to assemble electronic products. Racepak stays ahead of the technology curve, developing data acquisition components for professional drivers and auto enthusiasts to achieve maximum performance!
Not Yet Reviewed
$11.95
—
$14.95
HalTech offers a variety of data acquisition components and accessories for automotive performance and engine management applications. These firewall wiring grommets are molded from durable EPDM rubber and are available in different inside and outside diameters. They protect wires from sharp edges and abrasion when routed through the firewall to your gauge panel.
( 4 )
$16.00
Monitoring and relaying the exhaust gas temperature (EGT) signals from each of your cylinders is done using components from three groups: the thermocouple which actually measures the exhaust temperature, the junction box which gathers the four thermocouple sensors on each cylinder bank into a group, and an EGT module that connects the two junction boxes to the Racepak sensor network. Racepak EGT components are built and designed specifically for all of those roles. Whether it is EGT probes, junction boxes and cables, or an EGT module you need, Racepak has the high-quality components you need.
( 1 )
$13.12
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).
Not Yet Reviewed
$13.35
—
$19.95
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$13.12
HalTech thermal paste will enhance heat transfer between ignition module and mounting surface. This paste suits all OEM igniters.
Not Yet Reviewed
$10.00
Innovate EGT band clamps help you securely attach sensors that measure exhaust gas temperature to your exhaust pipe. These components are hose clamp-style sensor mounts for standard EGT sensors. The EGT band clamps feature a tapered cone that minimizes possible exhaust leaks at sensor entrance. The square clamp saddle prevents sensor rotation and the clamp dimples allow for pipe expansion due to extreme exhaust temperatures. The lower profile allows installation in confined areas and the brass body/ferrule can tolerate multiple installations for use time and time again. For secure connections, choose EGT band clamps from Innovate.
( 1 )
$22.99
Have you lost a cable? We offer these Innovate LM-2 replacement cables to work with your Innovate LM-2 meter. They are available in a variety of styles, lengths, and types. Whether you need a USB cable or just a replacement power cable, we will have you covered with these Innovate LM-2 replacement cables.
( 5 )
$20.99
AiM Sports binders create secure connections. These subminiature circular cable connectors are found in every AiM product, and they're offered in a variety of styles and pin counts to link up your data acquisition system.
( 1 )
$13.99
On Sale
Holley's EGT caps are quality replacement service parts designed exclusively for use with Holley's 8-Channel Exhaust Gas Temperature Monitoring kits (sold separately). These EGT caps are made from 316 stainless steel and fit the Holley 1/4 in. EGT bung fittings, They're sold individually or as a set of eight.
Not Yet Reviewed
$19.99
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$15.75
Computech male K-type connectors will allow you to replace the end of any weld-in EGT probe. When installing the connectors, be sure to run the red wire to the negative terminal and the yellow wire to the positive terminal.
( 1 )
$11.95
Racepak thermocouple connectors feature Type "K" calibration, are specifically made for Type K thermocouples, and are compatible with all fuels, naturally aspirated, and forced induction engines. Due to their reliability and accuracy, Type K thermocouples are used extensively in high performance and racing applications. Nickel based, they exhibit good corrosion resistance and function at temperatures up to 2,300 degrees F (1,260 degrees C). The connectors have small glass-filled thermoplastic yellow bodies and are rectangular in shape. Racepak thermocouple connectors are available in both male and female configurations. When you need to monitor the most critical systems on your vehicle, Racepak can help make it happen.
Not Yet Reviewed
$19.95
Computech female K-type connectors will allow you to extend any standard EGT probe or liquid temperature probe when combined with the thermocouple wire. When installing the connectors be sure to run the red wire to the negative terminal and the yellow wire to the positive terminal.
Not Yet Reviewed
$11.95
Racepak weld-in bungs offer quality made from steel and stainless steel. For EGT and air/fuel sensors, these weldments will create a place for your sensors and probes.
Not Yet Reviewed
$11.94
Clearance
G-TECH Pro performance meter components are just what you need to better utilize your G-Tech instruments. Whether you're looking for an external GPS antenna for improved signal reception and less satellite loss, an extra USB/download power cable to make modifications, a windshield mounting system, a durable ballistic nylon case to carry your unit, or a simple USB cigarette lighter outlet adapter, G-TECH Pro has all the high-tech meter components you could ever need!
Not Yet Reviewed
$39.95
$19.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
