Availability
Showing In Stock Items. Show All 85 Items.
These Summit Racing™ camshaft bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 64 )
$20.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 115 )
$20.99
—
$23.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$18.99
Replace worn-out or damaged bearings with these Sealed Power thrust washer bearings. They are built from quality materials and feature factory tolerances for a direct fit installation.
Not Yet Reviewed
$12.99
Edelrock cam bearings are the replacements for your LS aluminum race block. They feature steel-backed Babbitt bearing material. When parts wear out, Edelbrock has what you need to maintain optimum performance.
Not Yet Reviewed
$12.95
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$11.99
—
$23.99
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 133 )
$10.99
—
$14.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 504 )
$12.99
—
$23.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$20.99
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 107 )
$15.95
—
$22.95
ACDelco GM Genuine Parts rocker arms are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. That means the purchase of ACDelco GM Genuine Parts rocker arms will provide the correct fit and performance, delivering an easier install along with the optimal operation in your vehicle. The rocker arms are offered in different styles, ratios, and mounting options. They're available for hundreds of applications.
( 1 )
$15.99
—
$17.99
Moroso one-piece push-in valve cover breathers are designed to drain oil trapped in their foam filter elements back into the valve covers, rather than allow it to drain out of the air vents or get into the air cleaner. These breathers are available in several colors and finishes. They'll fit all Moroso valve covers, as well as any other covers with a 1.22 in. hole. Some have 90 degree nipples to feed vapor into the air cleaner, and an installation grommet is included.
( 36 )
$16.99
—
$19.89
Chevrolet Performance LSX block lifter guides are designed specifically for use on Chevrolet Performance LSX blocks. These 8 in. x 4 in. x 4 in. composite lifter guides will help properly complete your build or repair so you can get back on the road. Don't take chances with arbitrary inexpensive versions—order Chevrolet Performance LSX block lifter guides.
Not Yet Reviewed
$19.84
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$12.99
—
$20.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$10.99
—
$22.99
Keep your camshaft from wandering with Melling camshaft thrust plates. These solid steel plates protect your engine investment by returning your timing back to the desired specifications. Proper positioning of your camshaft is crucial. Don't let your cam walk--replace worn camshaft thrust plates with new ones from Melling.
( 38 )
$11.99
—
$17.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 115 )
$10.99
—
$21.99
Control what your PCV system allows back into your highly tuned combustion chamber with Keyser Manufacturing valve cover breathers. They prevent less-than combustible byproducts from being recycled into the combustion chamber, causing a buildup of crud on your valves and a less-than-optimal mixture in your combustion chamber. These breathers allow vapors to escape while catching any sludge, preventing it from leaking over your engine block.
( 6 )
$10.99
—
$11.99
Melling timing chain dampeners will get you back on the road. Manufactured from OE-quality materials, these replacements will provide the proper amount of tension on the timing chain to keep it from "whipping" during gear changes. They meet or exceed OEM performance requirements, and are available for fitment on the right and left side. Keep your engine running smoothly; enhance the life of your engine's timing system with Melling timing chain dampeners.
( 1 )
$16.99
Our Summit Racing™ cam buttons will keep your camshaft from walking back and forth in your block, which can lead to inaccurate timing and premature timing chain wear. The buttons are available in a variety of materials, sizes, and styles. They install with a standard cam bolt locking plate. Order the model recommended for your vehicle and engine application.
( 30 )
$11.99
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$11.99
—
$20.99
ACDelco GM Genuine Parts engine camshaft retainer plates are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles, so you can be confident they will fit and perform just like the originals they are replacing. Select the thrust plates designed for your vehicle.
( 4 )
$14.99
ACDelco GM Genuine Parts engine oil filler tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. When servicing your Chevrolet, Buick, GMC, or Cadillac, trust ACDelco GM Genuine Parts for the correct fit and function.
Not Yet Reviewed
$20.99
COMP Cams straight tube pushrods feature an extra-thick .125 in. wall and an ultra-rigid large 7/16 in. diameter design that prevents the damaging valvetrain vibrations that occur when smaller diameter pushrods snap back into position. These straight tube pushrods are offered in a variety of lengths and are precision-made with high-strength materials for consistency and accurate geometry. Selecting the correct pushrods is critical for proper valvetrain operation. You can count on COMP Cams for the quality components you need to keep your engine running right!
( 4 )
$17.95
—
$24.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
