Availability
Showing In Stock Items. Show All 232 Items.
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$11.99
—
$23.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$13.99
—
$23.99
Add a touch of Edelbrock-style flash and dash under your hood with their Signature series valve cover breathers. They're chrome plated push-on types, and are designed to match the company's chrome valve covers. These breathers are available with an optional 90 degree nipple, and each has the famous Edelbrock script logo embossed on the top. An internal filter traps oil vapor and prevents engine compartment contamination. An installation grommet is included.
( 130 )
$16.95
—
$18.95
Clearance
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 10 )
$25.04
—
$27.99
$19.50
PAC Racing RPM Series valve springs were developed using all of the latest advancements from Circle Track and drag racing successes. This valuable, real-life research has been applied to new designs, which allow for performance increases that exceed all demands. RPM springs are made from quality materials and are available in different diameters and pressures to suit your specific camshaft profile.
( 8 )
$19.86
Continental OE Technology Series Multi-V belts are factory-style replacements covering virtually all vehicle applications. These new straight-ribbed multi-V belts offer original fit and function that professional technicians appreciate for their customers. The serpentine belts are constructed with advanced EPDM rubber compounds that improve durability and deliver a quieter ride. They're available in well over a hundred lengths, with rib options ranging from three to 14. Order the model recommended for your car, truck, van, SUV, or crossover.
( 325 )
$10.99
—
$20.99
PAC Racing 1200 Series circle track valve springs are great for providing your valve train with optimal performance. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to perform lap-after-lap.
( 3 )
$15.83
ARP High Performance Series connecting rod bolts are made from seamless and defect-free 8740 chromoly steel. All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines.
( 255 )
$11.99
—
$18.99
PAC Racing 400 Series valve spring retainers are made from the very best American Titanium 6AL4V material available to bring you great strength with less weight. In order to have uniform material, PAC Racing buys mil run lots so they can define the tensile strength and seam characteristics. This version of titanium is widely used in the Aerospace industry, allowing for lower material costs compared to their 500 Series. These 400 Series retainers are robust, lightweight powerhouses able to tackle most street and off-road builds. The last thing anyone wants is a cheap part to ruin your day. For strength, uniformity, and reliability, you need to use PAC Racing 400 Series valve spring retainers.
( 3 )
$18.95
PAC Racing 1200 Series valve springs are great as replacement parts--or for pushing above and beyond the performance of OEM engines. Select them when you're upgrading camshafts or doing engine rebuilds. The 1200 Series use a premium alloy that outperforms automotive industry standards; and PAC Racing processes the alloy to aerospace shot-peening standards to achieve superior fatigue dependability. This ensures that the springs maintain the load needed to withstand rigors of both street and mild racing applications.
( 20 )
$14.54
—
$21.40
PAC Racing Hot Rod Series valve springs offer the engine and hot rod builder a mild upgrade or replacement for their hot rod. They are available in a variety of spring rates and diameters to accommodate your specific engine and camshaft profile.
( 1 )
$15.49
JE Pistons Series 51 wrist pins are specifically developed for use with their pistons. These pins are designed to further reduce reciprocating weight and are super-finished on both the outside and inside to help minimize piston pin bore wear and fatigue cracking. JE Pistons philosophy of supplying the finest products at competitive prices has never been more evident than in their line of wrist pins. Order the JE wrist pin designed to fit your application.
( 8 )
$17.99
PAC Racing 500 Series valve spring retainers are every bit as reliable as retainers 20 percent heavier. These retainers are produced from the finest proprietary high-tensile titanium alloy for incredible wear and strength. PAC's engineers take this material and form the ultimate lightweight retainers. They are designed for high-rpm professional racing and abusive or severe engine applications. When you're building severe engines, you need parts designed to withstand incredible heat and rpm. PAC Racing 500 Series valve spring retainers are built to take all that you can give.
( 2 )
$18.95
If you don't need the ultra-high strength of ARP Pro series Wave Loc connecting rod bolts, then you'll like their High Performance Series. Made from tough 8740 chromoly steel (rated at 190,000 psi), these bolts have the Wave Loc symmetrical wave design that eliminates sharp notches and guarantees cap alignment. Nuts and lube are included.
( 36 )
$22.99
—
$23.99
PAC Racing 1900 Series Hot Rod valve springs are great for replacing the valvetrain components on your hot rod car or truck build! Every one of these 1900 Series Hot Rod valve springs are designed with performance and quality in mind, using the highest quality components available!
( 6 )
$10.97
—
$16.56
Elevate your vehicle's performance with Engine Works Street Series exhaust valves. Designed to unlock maximum power and efficiency, these top-tier products ensure your vehicle operates at its peak potential. Engineered to thrive under high-speed conditions, this performance upgrade guarantees unparalleled durability and remarkable value for your investment. With Engine Works, you can tackle both the racetrack and everyday streets with unwavering confidence, indulging in a thrilling driving experience like never before.
Not Yet Reviewed
$10.61
Howards Cams Performance Series C1010 pushrods are manufactured from .060 in. wall C1010 low-carbon steel material. They provide over 20 percent more column strength than OEM pushrods. Their advanced design eliminates ball breakage. They are heat-treated for use with guideplates and are designed for up to 500 lbs. of valve spring pressure.
( 57 )
$17.99
Continental OE Technology Series Multi-V stretch belts are serpentine replacements especially useful in applications with no mechanical tensioner. They deliver the factory fit and function that mechanics and drivers appreciate. Uniquely designed with advanced EPDM rubber compounds, these stretch belts feature nylon tensile cord that elongates for installation, but recovers to maintain constant tension over the life of the belt. They're available in 3, 4, 5, and 6-rib models for use on specific vehicles.
( 1 )
$10.99
—
$20.99
Summit Racing™ OE rocker arms for LS Series bearing upgrade kits are specifically designed for those individuals who tend to use OE GM rockers with the pivoting/bearing upgrade. They're manufactured from high-strength, SAE-rated steel and sport a natural finish. For all of your part needs, go with Summit Racing™--quality, value-priced performance parts.
( 9 )
$11.99
Clearance
PAC Racing 1300 Series valve springs are designed for engines that require longevity and performance to successfully complete the race. They incorporate the latest in heat-treating technology and innovative, dynamic surface-enhancement processes.
( 1 )
$41.79
$19.50
When oil, heat, and abrasion combine to weaken most standard accessory belts, Continental OE Technology Series V-belts will still be going strong. Continental V-belts have inherited tough construction characteristics: EPDM rubber compounds, high-strength Vytacord tension members, fiber reinforced helical cogs, and high-traction rubber edges. These features provide higher heat and abrasion resistance, no-slip contact with pulley grooves, a great fit, and improved flexibility—to deliver consistent, efficient performance, mile after mile. Belts wear and need replaced; get more for your buck with longer-lasting Continental OE Technology Series V-belts, available for a wide range of vehicle-specific applications.
( 49 )
$10.99
—
$21.99
Clearance
PAC Racing 1500 Series valve springs feature an industry-leading nitriding process that enables the material to withstand the abusive, wear, and fatigue of the typical endurance engine environment. They arrive fully prepared for racing with chamfering, polishing, and the latest surface-enhancement technology available. From 24 hours of LeMans, to the rigors of NASCAR--PAC Racing 1500 Series valve springs have the storied history to thrive in challenging environments.
Not Yet Reviewed
$43.99
$19.50
JE Pistons Pro Seal Premium Sportsman Series piston rings are designed to maximize horsepower through precision sealing of combustion pressure. The piston rings are available in a huge selection of sizes, various materials, and in multiple thicknesses to suit a variety of engines. JE Pistons also offers an array of custom piston ring services including back cutting, dyke cutting, lapping, grinding, and PVD coating. These are the same services used by top NHRA Pro Stock and NASCAR teams—and are now available to the public, offering tremendous gains in durability, power through reduced friction, and improved ring seal. Order the ring application to fit your needs.
( 15 )
$15.09
—
$19.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$12.99
—
$20.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
