Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
158 Results Found For "Cams"
Showing In Stock Items. Show All 207 Items.
Summit Racing™ Camshaft Retainer Plates
Summit Racing™ camshaft retainer plates secure your cam in the block where it belongs. Designed to fit behind the camshaft timing gear, these plates keep end play under control. They're available in different styles for fitment on a variety of Chevrolet small block, big block, Ford Small Block Windsor, LT, and LS-based engine applications from the 1990s and up.
( 92 )
$14.99
—
$19.99
Dura-Bond Standard Cam Bearings
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 96 )
$10.99
—
$19.99
COMP Cams Cam Lock Plates
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
—
$18.99
COMP Cams Cam Buttons
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 112 )
$14.99
—
$15.95
BTR Camshaft Retainer Plates
BTR camshaft retainer plates are designed to fit behind the front cover and support greater cam loads for Gen III/Gen IV LS-based engines. They act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. A specially designed gray O-ring seal keeps your oil sealed in. When modifying your valvetrain for better performance—don't forget BTR camshaft retainer plates!
( 7 )
$19.99
Howards Cams Camshaft Thrust Buttons
Howards Cams camshaft thrust buttons are designed to control cam endplay. Excessive cam play can cause inaccurate ignition timing and premature timing chain wear. These cam thrust buttons simply push into the front of the cam gear.
( 2 )
$12.99
Howards Cams Roller Cam Thrust Buttons
Howards Cams roller cam thrust buttons feature a full needle bearing design. These roller cam thrust buttons maintain proper cam endplay, preventing inaccurate timing and premature timing chain stretch. Howards Cams roller cam thrust buttons are a must for roller cam applications.
( 10 )
$11.99
—
$13.99
Melling Camshaft Thrust Plates
Keep your camshaft from wandering with Melling camshaft thrust plates. These solid steel plates protect your engine investment by returning your timing back to the desired specifications. Proper positioning of your camshaft is crucial. Don't let your cam walk--replace worn camshaft thrust plates with new ones from Melling.
( 38 )
$14.99
—
$17.99
Howards Cams Advance and Retard Cam Bushings
Howards Cams advance and retard cam bushings offer an easy way to advance or retard your cam timing. These offset bushings come in four offset bushings and one zero degree bushing to return your timing back to stock. These bushings are precision-manufactured to offer the precise timing of your cam.
( 4 )
$13.99
—
$18.99
COMP Cams Degree Bushings
Using COMP Cams offset bushings is the simplest way to change the degree of a camshaft in relation to the crankshaft. These bushings offer accurate positioning of the cam because of their precise manufacturing.
( 14 )
$17.95
COMP Cams Camshaft Bolts
COMP Cams camshaft bolts are designed to prevent breakage. They are rated at 170,000 psi and are available for most popular applications. These bolts are the perfect items to top-off any camshaft installation.
( 7 )
$10.95
—
$16.95
Summit Racing™ Cam Buttons
Our Summit Racing™ cam buttons will keep your camshaft from walking back and forth in your block, which can lead to inaccurate timing and premature timing chain wear. The buttons are available in a variety of materials, sizes, and styles. They install with a standard cam bolt locking plate. Order the model recommended for your vehicle and engine application.
( 31 )
$11.99
ACDelco GM Genuine Parts Camshaft Thrust Plates
ACDelco GM Genuine Parts engine camshaft retainer plates are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles, so you can be confident they will fit and perform just like the originals they are replacing. Select the thrust plates designed for your vehicle.
( 6 )
$15.99
Cloyes Cam Buttons
Cloyes cam buttons help prevent your cam from walking. They also provide a good anti-friction surface. You can count on Cloyes for quality parts.
( 4 )
$16.99
—
$19.99
Summit Racing™ Cam Bearing Sets
Summit Racing™ offers cam bearing sets for a wide range of applications—including many Chevrolet small block V8 engines from 1955 and up. These bearings support the camshaft and allow it to rotate so it will activate pushrods and rocker arms to open and close valves. The direct replacements are available in a variety of materials. Order the set recommended for your vehicle.
Not Yet Reviewed
$16.99
—
$17.99
Manley Camshaft Thrust Buttons
You just gave that powerful beast a new roar, so don't let the camshaft walk around messing with your finely tuned creation. Leash it in place with these Manley camshaft thrust buttons. They're available in various lengths, styles, and materials to allow for the best fitment. Keep your hard work and tuning under control and ready for the road or track with Manley!
( 3 )
$13.31
Jesel Camshaft Thrust Shims
Jesel camshaft thrust shims help eliminate the cam gear from scuffing or galling your block face. The shims are made from solid steel and machined for your specific engine.
Not Yet Reviewed
$18.93
BTR Camshaft Bolt Kits
BTR camshaft bolt kits will easily end your camshaft timing worries. These fasteners offer easy installation and removal with their reduced head size. If you're installing a new cam or simply upgrading the hardware, order the BTR camshaft bolts recommended for your year/make and engine application.
( 9 )
$11.89
Trick Flow® Roller Followers
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$14.99
—
$18.99
ARP Cam Bolts
End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation and removal easier. They are available in 170,000 psi high performance kits and 190,000 psi Pro series kits.
( 277 )
$17.99
Clevite Camshaft Bearings
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 189 )
$13.99
ARP Camshaft Drives
ARP camshaft drives are designed to help your camshaft survive an entire race without the bolts breaking. They feature ARP2000 forged 220,000 psi alloy chromoly steel construction with a corrosion-resistant black oxide finish for durability. They are available in 1 in. or 1.5 in. lengths, so you can choose what's best for your engine. ARP camshaft drives have a 3/8 in. hex drive on the drive end for an easy installation.
Not Yet Reviewed
$19.99
Dart Cam Bearings
If you're building up a Dart block and want the best bearings with the correct sizing, then you'll want Dart cam bearings. They're fully grooved, made from steel-backed babbit, and specifically designed for high performance use. To all of this, Dart adds their own moly-PTFE coating for even better performance and durability. This coating is approximately 0.0005 in. thick, which translates into 0.001 in. less overall clearance.
( 34 )
$18.99
—
$19.99
Edelbrock LS Race Block Cam Bearings
Edelrock cam bearings are the replacements for your LS aluminum race block. They feature steel-backed Babbitt bearing material. When parts wear out, Edelbrock has what you need to maintain optimum performance.
Not Yet Reviewed
$12.95
