Availability
Holley fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They transform jet changing into an easy process with no worries of ripped gaskets.
( 89 )
$11.17
—
$15.88
Restore the performance of your high-mileage fuel pressure regulator with these genuine Holley diaphragm repair kits. You'll regain the accuracy and performance of the regulator from when it was new.
( 64 )
$11.85
On Sale
Holley HP billet fuel filter replacement elements are for use with your Holley HP billet fuel filter. They're available in your choice of a 10-micron depth media element or 40-micron and 100-micron stainless steel woven mesh elements. Ensure that your fuel filter is preventing contaminants from entering the engine. Update your old unit with a quality replacement element from Holley.
( 13 )
$23.79
$15.46
These Holley fuel bowl screw gaskets are designed to replace those worn-out gaskets that may cause a leak. They will work on most Holley carburetors.
( 20 )
$19.58
These Holley mechanical fuel pump covers will seal your engine off after you replace your mechanical fuel pump with an electric one. Made from steel and chrome plated, they'll add some shine to your engine compartment.
( 7 )
$20.34
Holley fuel pump module mounting shims are the best way to make sure your module stays secured. Whether you race, off-road or daily drive your vehicle, the module can become loose over time. This can cause leaks, allow gas fumes to get into your ride—or worst-case scenario, your entire pump module disconnects. Order the size needed to help properly secure your fuel pump module application.
( 2 )
$21.00
On Sale
The heart of a fuel system begins with the fuel tank. Secure your tank in place with Holley Sniper fuel tank straps. Available in many styles and shapes to fit a variety of applications, they are made from steel and galvanized for corrosion protection and continued good looks. Holley Sniper fuel tank straps provide a simple and inexpensive solution to alleviate fuel tank issues.
Not Yet Reviewed
$36.17
$19.89
On Sale
Holley fuel injector O-ring seals are designed to keep your system leak-free. They are made of rubber and will resist high temperatures and chemicals. The O-ring seals work for all Holley fuel injectors and fit GM Delphi multi-port injectors.
( 3 )
$26.38
$14.51
Protecting your vehicle's engine from fuel contamination starts with Holley Sniper fuel gauge sending unit gaskets. These gaskets are critical to avoiding costly and dangerous fuel leaks. Available in multiple materials and mounting screw counts.
( 1 )
$14.44
Holley fuel transfer tube O-rings are designed to fit over the fuel transfer tube for a leak-free seal. They are available in rubber or Viton® for your fuel system needs. The O-rings will fit Holley 4160/4165/4175 carburetor models.
( 15 )
$11.19
—
$13.97
Holley fuel bowl inlet fitting gaskets will give you a perfect seal every time. They are available in steel or nylon and fit most standard Holley fuel bowls.
( 19 )
$12.66
Holley carburetor fuel transfer tubes will replace your factory transfer tube without any modification. They are made of aluminum, feature a natural finish.
( 12 )
$18.18
Holley fuel bowl vent baffles are used with the center-hung style fuel bowl. It extends the fuel bowl vent to near the wall of the fuel bowl and can effectively control fuel splash on the primary side when accelerating hard, or on the secondary side when braking hard.
( 7 )
$18.20
Holley has fittings to adapt different sized fuel lines to bare Holley fuel bowls, as well as hose and banjo fittings for special applications.
( 105 )
$18.99
—
$20.32
Holley in-tank fuel lines are submersible in-tank hose kits designed for use with in-tank fuel pump applications. The kits consist of reinforced fuel hose.
( 5 )
$11.19
Holley fuel bowl plugs are designed to plug the open holes on your carburetor fuel bowls. They are manufactured from quality materials and come available in different thread sizes to match your specific carburetor.
( 5 )
$13.96
—
$21.00
These Holley fuel bowl fittings are an exact fit to ensure a perfect seal. An O-ring is included, so you won't have a fuel leak again.
( 38 )
$16.78
—
$19.58
Get efficient performance by ensuring a proper seal. Holley has replacement gaskets for every type of Holley carburetor. From the base gasket to the air cleaner ring gasket and everything in between, you're sure to find what you need.
( 110 )
$19.29
—
$19.58
Holley offers their accelerator pump diaphragms for all of their carburetors. These quality pieces ensure that the job is done right and help to keep your carb functioning like new.
( 117 )
$15.88
—
$19.61
Holley replacement power valves are an important component in the power enrichment circuit of Holley's performance carburetors. They operate by using engine vacuum to control their opening and closing rate. When they open, additional fuel is supplied to the main system during heavy load or under full power situations to eliminate hesitation and bogging--ensuring the smooth delivery of power without any drivability concerns. They're available in many different vacuum ranges to time the system's operation to your specific requirements, and they come in your choice of single-stage, two-stage, and high-flow designs. A gasket is included.
( 130 )
$15.88
—
$19.60
Replace your worn or missing throttle studs with the Holley recommended carburetor throttle lever studs.
( 99 )
$11.85
—
$21.57
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 107 )
$19.58
—
$20.32
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetor metering block gaskets are available for a variety of Holley carburetors with and without intermediate systems. These gaskets ensure a good, leak-free seal between your carburetor body and metering blocks. Holley can give you the edge you need over the competition!
( 26 )
$11.17
—
$16.61
Holley vacuum secondary diaphragms will replace your existing worn-out diaphragms. They are made from a high performance rubber material and will fit most Holley carburetors with vacuum secondaries.
( 49 )
$18.99
—
$19.58
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
