Availability
Simplify your valvetrain maintenance with COMP Cams valvetrain checking springs. They feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft. They're available as singles or pairs.
( 67 )
$15.95
As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams offers this set of valve spring shims to solve this problem and eliminate failures.
( 104 )
$19.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$10.95
—
$25.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$11.95
—
$24.95
COMP G2™ Valve Springs represent months of work by their engineering team to identify dated valve spring designs and bring them up to modern-day standards. COMP G2™ valve springs are using the same materials and manufacturing technologies demanded by today's race teams and modern engine platforms. These springs are a product of innovative design and superior craftsmanship using premium materials and precision manufacturing. Engineered with state-of-the-art techniques utilizing premium wire, they redefine reliability and consistency in the performance automotive aftermarket. Featured are single and dual valve springs, available as individuals or four, six, or eight-cylinder applications.
( 2 )
$12.09
—
$16.95
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$11.95
—
$13.95
COMP Cams tool steel valve spring retainers are lightweight, high-strength, and have excellent wear characteristics. They're 30 percent stronger than conventional chromoly steel retainers and can withstand even the most demanding engine rpm ranges. Manufactured from high-grade tool steel, COMP Cams tool steel valve spring retainers are the right components to instantly add reliability to your valvetrain.
( 2 )
$24.95
After compressing the VVT spring, this COMP Cams camshaft phaser spring limiter/lock tool (5455) is used to hold the variable valve timing spring in place while installing the 5457 phaser limiter plug. COMP Cams offers the engine timing tools needed for a variety of vehicle year/make and engine applications.
Not Yet Reviewed
$22.95
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 190 )
$12.95
—
$23.95
COMP Cams Street valve locks are stock replacement for stock engine rebuilds. They're stamped and hardened for superior wear resistance. Use these steel valve locks for street applications with standard valve spring loads. They're available in a variety of sizes, styles, and quantities.
( 42 )
$17.95
—
$26.95
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$17.95
—
$28.95
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 453 )
$15.95
—
$22.95
COMP Cams dual taper pushrods feature a unique dual taper for high strength and lightweight construction. They are manufactured from special steel alloy and utilize a 210-degree tip for an increased load-bearing surface. COMP Cams dual taper pushrods feature a .165 in. wall thickness to withstand today's high-pressure valve springs.
( 3 )
$20.95
—
$26.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$11.95
—
$13.95
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 128 )
$12.95
—
$26.95
COMP Cams titanium 8 degree valve locks are designed for engines needed lightweight, durable valve locks. They are manufactured from titanium and offer superior valve spring location. The COMP Cams titanium 8 degree valve locks will require specific retainers and will not fit standard 7 or 10 degree retainers. Give your valvetrain an upgrade with these COMP Cams titanium 8 degree valve locks.
Not Yet Reviewed
$26.95
COMP Cams performance lash adjusters provide more lift and duration while improving valvetrain stability. Lash adjusters in Ford Modular motors can leak down under high-rpm, causing lost duration and lift, as well as more valvetrain wear. COMP Cams adjusters are engineered to have a slower leak-down rate and better resist collapsing than stock models, providing more lift and duration when aggressive performance camshafts and heavy-duty valve springs are installed, as well as better valvetrain stability and high-rpm durability. They are finished with black oxide coating that prevents rust and corrosion while contributing to increased durability and life span. Lash adjusters are available individually or in sets for a variety of vehicles from the 1990s and up.
Not Yet Reviewed
$23.95
High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.
( 28 )
$20.95
—
$24.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
